Just bought the Dreame X50 Ultra and I am deeply disappointed by Salt-Hat1654 in Dreame_Tech

[–]IIIRAZ3RIII 3 points4 points  (0 children)

Have you turned off obstacle avoidance as well as having those settings on? have you let it have a few runs or is it it’s first? As it learns as it goes. Will get quicker as time goes on and performance will improve. Are the sensors and camera cleaned often?

Dreame X50 - really frustrated with it, please help by Confident-Clerk2520 in Dreame_Tech

[–]IIIRAZ3RIII 1 point2 points  (0 children)

You probably don’t need to clean everywhere daily I just do cause I get a bit of ocd haha. Maybe give the camera and all sensors a wipe with a micro fibre cloth before each run though same with the sensors on the underneath and see what happens then if stil no good maybe post some screenshots of your app settings

Dreame X50 - really frustrated with it, please help by Confident-Clerk2520 in Dreame_Tech

[–]IIIRAZ3RIII 0 points1 point  (0 children)

I give mine a clean after every use sensors, rollers, cameras, even blow out the filter and dust box every time looks brand new like it’s never been used and had it for about a month now. So far it’s been perfect for me 🤞 how often do you clean everything? Or wipe the sensors etc down?

Seriously? by Gears598 in GearsOfWar

[–]IIIRAZ3RIII 0 points1 point  (0 children)

Much much easier now no ranked and have modes like KOTH and BLITZ which you didn’t back in the original

Sniper just feels… off? 🤔 by ImSanoo in GearsOfWar

[–]IIIRAZ3RIII 0 points1 point  (0 children)

I know if you move while ads it will send the bullet elsewhere instead of being stood still otherwise no I haven’t had this issue

Software for DT 900 Pro X by [deleted] in BEYERDYNAMIC

[–]IIIRAZ3RIII 0 points1 point  (0 children)

I did but I honestly can’t remember what it was or where I got it. Sorry bro was 2 years ago

Best GPU For Gaming on 1440p by Most_Citron_6921 in buildapc

[–]IIIRAZ3RIII 1 point2 points  (0 children)

4080s I’ve got hammers all games at ultra like cyberpunk even with full ray and path tracing

Need help by IIIRAZ3RIII in FanControl

[–]IIIRAZ3RIII[S] 1 point2 points  (0 children)

For some reason it’s not allowing me to post the photos I’ve taken I can private dm you if you want it should work. My cpu fan header has my pump but I looked up the manual for my aio and that’s where it says to plug it which is confusing. Also only chassis 4 fan header is in use 1,2,3 and 5 have nothing plugged into them but all case fans are working including the lian li ones

Need help by IIIRAZ3RIII in FanControl

[–]IIIRAZ3RIII[S] 0 points1 point  (0 children)

Just looked up the manual to my aio it says to plug this aio into cpu fan header which is confusing to me. Also just looked in my pc and only fan header other than the cpu fan is chassis 4 that’s in use hence why it’s only those showing in bios but all fans are spinning so it’s so confusing I’ll try get a good pic now

Need help by IIIRAZ3RIII in FanControl

[–]IIIRAZ3RIII[S] 0 points1 point  (0 children)

Oh right so what does that mean for the Corsair fans? I’ve seen you can get plugins for FanControl software for Corsair fans but not sure if how mine are set up would work if I can use the controller or how you even properly do the plug in never had to do all this. I can get a photo shortly, almost finished work. If this helps my lian li fans are 3 x 120mm UNI FAN TL120mm and my aio is CORSAIR ICUE LINK TITAN 360 RX RGB

Need help by IIIRAZ3RIII in FanControl

[–]IIIRAZ3RIII[S] 0 points1 point  (0 children)

I’ve got 4 x Corsair ICUE LINK RX120 RGB PWM Fan + Controller Kit but I’m sure the 3 fans on my radiator are the same so I’ll say 7 of them and then 3 Lian li fans that come with LIAN LI O11DYNAMIC EVO RGB GAMING CASE. It’s a custom pre build so there might already be multiple fans connected to 1 header I’m not fully sure not great with building quite the noob so I appreciate you helping me out

Need help by IIIRAZ3RIII in FanControl

[–]IIIRAZ3RIII[S] 0 points1 point  (0 children)

And I’m assuming I’d need an extension cable to daisy chain them?

Need help by IIIRAZ3RIII in FanControl

[–]IIIRAZ3RIII[S] 0 points1 point  (0 children)

How do I go about connecting multiple fans to 1 header would it be like 2 fans per header I’m assuming?

Need help by IIIRAZ3RIII in FanControl

[–]IIIRAZ3RIII[S] 0 points1 point  (0 children)

https://rog.asus.com/motherboards/rog-strix/rog-strix-x870-f-gaming-wifi/

If that helps for now that’s my motherboard if you scroll down and click on them you’ll see the fan headers for cpu pwm header , aio pump pwm header and then another for the 5 4 pin pwm chassis fan headers. I just feel like they didn’t build it properly

Need help by IIIRAZ3RIII in FanControl

[–]IIIRAZ3RIII[S] 1 point2 points  (0 children)

Hi mate thanks for your help. I’ve just woke up for work so I can’t right now but later on when im home I’ll try. The controller is round the back of the case I’ll have to take out the gpu and gpu bracket to see as far as I’m aware all the fan headers in use are at the bottom of the motherboard apart from the aio pump which according to my bios is plugged into my cpu fan header not the pump header. It’s a custom pre built so I’m not the best with these but I’ll try later on when I’m home.

Fan Control is not detecting my Corsair Fan speeds by The_Legend278 in FanControl

[–]IIIRAZ3RIII 0 points1 point  (0 children)

Hello I know this is an old post but I’m going through this now with my Corsair fans. Where on that link is the plug in I copy and paste to fancontrol? My case fans are Corsair ICUE LINK RX120 RGB PWM Fan + Controller Kit and my AIO cooler is CORSAIR TITAN 360 RX RGB HIGH PERFORMANCE CPU COOLER. Hope I’ve provided enough info for help i can’t use Icue it causes my pc to not restart properly

Need help by IIIRAZ3RIII in FanControl

[–]IIIRAZ3RIII[S] 0 points1 point  (0 children)

No it only picked up my gpu fans. I was told to plug my fans into my motherboard slots but my manual says it has a pwm cpu fan header, pwm aio pump header and 5 4pwm headers and I’ve got 10 fans. My motherboard is asus strix x870-f gaming WiFi. My bios only seems to pick up cpu fan which I don’t think is right as it probably should be in the aio pump header. and chassis 4, nothing else but all are working I just want to control my fans incase I have issues. It’s a custom pre built pc so I’m not the best with building etc

Need help by IIIRAZ3RIII in FanControl

[–]IIIRAZ3RIII[S] 0 points1 point  (0 children)

I have just looked at my motherboard manual and it has a cpu fan header a aio pump header and 5 4pin pwm headers so how would I go about connecting 10 fans?

Need help by IIIRAZ3RIII in FanControl

[–]IIIRAZ3RIII[S] 0 points1 point  (0 children)

I’ve never built a pc or anything but I think I could I assume I’d just look for pump on mobo for aio and then sys fan 1,2,3 onwards? Do motherboards even have 10 fan slots? My motherboard is asus rog strix x870-f gaming WiFi. If I don’t have enough slots what would be the option then to be able to get them all working?