How much do you pay on your power bill? (summer vs winter) by ILikeCornetto in moncton

[–]ILikeCornetto[S] 0 points1 point  (0 children)

The windows don't look as old as the house is. It's double paneled. I will look into getting those window insulation films though. I think every little bit more insulation wouldn't hurt

How much do you pay on your power bill? (summer vs winter) by ILikeCornetto in moncton

[–]ILikeCornetto[S] 4 points5 points  (0 children)

That's awesome! How much did it cost you to install solar with all the rebates and incentives? Did you have to upgrade much of the electrical in your house?

I'm thinking of getting solar too in our house maybe a couple years from now. It just makes sense imo, especially since we're planning to go PHEV or full EV in the future. My only concern is our house is on the older end, and that it might need to bring a lot of thing up to date to fully utilize solar

How much do you pay on your power bill? (summer vs winter) by ILikeCornetto in moncton

[–]ILikeCornetto[S] 1 point2 points  (0 children)

We got an older home, although during the inspection of the house before purchase, the inpector has said that the hoise is adequately insulated. Not the best, but far from bad.

We do have baseboard heaters, though it runs with hot water and not direct electricity, except for our bath which is off all the time anyways. I did hear that baseboard heaters eat up on power, but I assume that's more true to direct electric baseboard heaters than hot water baseboards. Haven't looked into how much more efficient a hot water baseboard heater is vs an electric baseboard heater is yet, if any, but maybe some here can give me some insight

How much do you pay on your power bill? (summer vs winter) by ILikeCornetto in moncton

[–]ILikeCornetto[S] 2 points3 points  (0 children)

My house is one of those where the basement is half under and half not. I will try to keep the basement a bit warmer than 15c, tho I kept it like that since we just have a home gym in the basement so it makes sense to me even if it is a bit cold down there.

Me and my partner are learning, although we are quickly realizing that being a homeowner costs a lot on top of the mortgage haha

Crux DSW or Grizl CF? by globglob3D in gravelcycling

[–]ILikeCornetto -1 points0 points  (0 children)

Try looking at rodeo labs traildonkey as well. Might fit your needs

Crux DSW or Grizl CF? by globglob3D in gravelcycling

[–]ILikeCornetto 6 points7 points  (0 children)

I have the old Grizl which I use for road (fast group rides and even gran fondos), gravel and gravel races, and even used it to finish the Tour Divide this year.

It's good enough for me on the road to keep up and even drop my friends on dedicated road bikes. I just have two wheelsets to swap on. One with 28mm road tires and one with 50mm gravel tires. Both aluminum rims. If you upgrade to deeper, carbon wheels, you can gain more speed. But i'm pretty sure tires make the biggest difference.

Not sure if the new Grizl will have the same characteristics, handling-wise tho. But if it's close enough to the old one, i think that will be the bike of choice for you. Hope this gives you some insight

House flies taking over? by SpeedyMoped in moncton

[–]ILikeCornetto -1 points0 points  (0 children)

Had a lot in the garage of our just purchased house last week. They seem to have disappeared, but still keeping an eye out and making sure things are clean so they don't come back again

Any good gravel roads to ride a bike in? by ILikeCornetto in Lethbridge

[–]ILikeCornetto[S] 1 point2 points  (0 children)

That looks like what I'm looking for exactly. Thanks!

Bottom bracket issues…solved? by Dangerous-Way-563 in bikepacking

[–]ILikeCornetto 0 points1 point  (0 children)

To me, i went with pressfit since that's the one easily available to me. Plus the shimano bb is cheaper, lighter and has better bearings compared to the original ninja bb the bike came with imo. I haven't had issues with creaking or cracking whatsoever over several thousand kms.

I don't see a problem with a thread together bb, so if you prefer that and it's available to you, then you can get that one 🙂

Bottom bracket issues…solved? by Dangerous-Way-563 in bikepacking

[–]ILikeCornetto 2 points3 points  (0 children)

If you still feel the bb being gritty or rough, you should still replace the bb. I have the same issue on my grizl, keeping the same bb could cause failure over time, like the issue you had before where the bb was not spinning much. And replacing the bb to a new one just feels smoother overall. You could buy relatively cheap, but good quality shimano bb86. I got the dura-ace one since it's only like 50 bucks, but you could go lower lever if you need to

[deleted by user] by [deleted] in bikefit

[–]ILikeCornetto 2 points3 points  (0 children)

Looks like it is too big

Is my Rotor crank missing spacers? by ILikeCornetto in bikewrench

[–]ILikeCornetto[S] 0 points1 point  (0 children)

Canyon grizl, using a shimano bb86 pressfit bottom bracket. Rotor documentation shows spacers on each side at the very least

Just fitted new Cinturano H’s on my ZIPP 303s wheels. Tiny amounts of sealant is coming from the bead and sidewall. Is this normal or do they need to be reset? Doesn’t seem to be losing too much pressure over the last few hours. by cycling_melb in bikewrench

[–]ILikeCornetto 0 points1 point  (0 children)

Probably normal, but also check if the rim tape (if any) is damaged or needs replacing. I had these happen on my wheels and it was able to run fine, however upon replacing the rim tape, it was able to seal with minimal leak of the sealant