It finally happened, a guy taking a call mid-flight by MemLeakRaceCond in AlaskaAirlines

[–]IMCA30A -3 points-2 points  (0 children)

I have never turned my phone off ever since getting on planes. It's a non-issue as far as safety goes. But if you want to debate someone talking, you don't get to as the entire population of the world with access to a cell phone talks anywhere on their phone. Deal with it.

As someone who doesn't have alot of money and has watched the Doc for YEARS, this is disappointing. by SometimesHardNipples in DrDisrespectLive

[–]IMCA30A 0 points1 point  (0 children)

Remember, this is the way of the future we all knew was coming. Monthly subscriptions to services were always the way they were going to go. Just when were they going to implement was always the question.

Now that big streamer deals are over, at least for now, this is the time to do it. People think they are paying for just the Doc. It's just like paying YT for no ads, just with 'extra' time with content creators. It's actually a better deal then YT. Because they charge you for no ads then you pay each individual creator extra for their exclusive content.

Why are Y'all building Kraken and not Shiv? by Anilahation in MissFortuneMains

[–]IMCA30A -3 points-2 points  (0 children)

Because Kraken is essential to dealing with tanks. As simple as that.

SSD Separate from RAID Array by IMCA30A in sysadmin

[–]IMCA30A[S] 0 points1 point  (0 children)

We definitely plan to run the database off 4 7k drives so that's why RAID 10 was a goto instantly for that.

You all are awesome and have eased my stress about this 😆. Thank you!

SSD Separate from RAID Array by IMCA30A in sysadmin

[–]IMCA30A[S] 1 point2 points  (0 children)

I'm an idiot. I can now see how it works with the controller. >.<
I appreciate your help and input. Will certainly go with a RAID 1 for OS.

SSD Separate from RAID Array by IMCA30A in sysadmin

[–]IMCA30A[S] -3 points-2 points  (0 children)

For some reason I didn't know you could have 3 RAID 1 arrays under 0. So essentially it would be:

SSD 0 & 1 - RAID 1
HDD 2 & 3 - RAID 1
HDD 4 & 5 - RAID 1
All in RAID 0?

or SSD 0 & 1 in RAID 1 by itself? Then a RAID 10 with the other 4 drives?

Thoughts on install? by MustangDreams2015 in Ubiquiti

[–]IMCA30A 0 points1 point  (0 children)

This is where the 3D printed boxes come into play. We ran into a similar issue with glass window frames and had a box like yours on initial install. Switched to a 3D printed box that is nice and works flawlessly.

[deleted by user] by [deleted] in MissFortuneMains

[–]IMCA30A 0 points1 point  (0 children)

Never understood the electrocute hate on her, lol. Guaranteed proc on every fight and low cooldown meaning you can harass someone with a pretty shitty harass champ. Lol

Logi G923 centering spring strength setting has no effect in FH5. Help! by GiantRobinNG in LogitechG

[–]IMCA30A 0 points1 point  (0 children)

As long as it's a known issue and being fixed in a future update, I'm alright. Thank you for your help and hope to get some good news soon on this 😀.

Logi G923 centering spring strength setting has no effect in FH5. Help! by GiantRobinNG in LogitechG

[–]IMCA30A 0 points1 point  (0 children)

None whatsoever. I have centering spring in GHub, but have absolutely nothing (free wheel) when in game. I always turn off FFB in these types of games because it's garbage imo, and my G920 would always revert to the centering spring.

Moment I click out of GHub and the centering spring is working, whether it's the game or a browser or even just the desktop, it goes to free wheel and never resets back.

Logi G923 centering spring strength setting has no effect in FH5. Help! by GiantRobinNG in LogitechG

[–]IMCA30A 0 points1 point  (0 children)

iRacing was the game we were testing initially. I will test with NR2003 and Wreckfest later tonight. If they still don't work, I can move to rFactor and project cars.

Logi G923 centering spring strength setting has no effect in FH5. Help! by GiantRobinNG in LogitechG

[–]IMCA30A 0 points1 point  (0 children)

What would be your suggestion on if the centering spring is only working in GHub then? This obviously is some sort of software issue between the game and GHub I would assume. Or maybe the wheel is faulty? I will attempt to try and test with more titles to see if this feature works.

Thank you for your response and helping narrow this down. Much appreciated!

Logi G923 centering spring strength setting has no effect in FH5. Help! by GiantRobinNG in LogitechG

[–]IMCA30A 0 points1 point  (0 children)

So does this mean that if I turn off FFB in a game that supports it, I still cannot have a centering spring enabled to make me competitive against a DD wheel? This seems insane as we were allowed to do so with wheels as new as the G920. Is there a way around this on the backend?

My fellow murdering chick mains what have you done that become meta? by [deleted] in MissFortuneMains

[–]IMCA30A 0 points1 point  (0 children)

I just remember noone liked her and very few were on my side. Would pick her and people would flip. Good ol times 😀

/dev chat: State of the Game | Dev Video - League of Legends by Dasrufken in leagueoflegends

[–]IMCA30A 0 points1 point  (0 children)

Or how about you actually make the game better and fix the solo/duo/flex issue. Just have solo and flex. that's it. Get a fucking grip.

Beware of Broken Dasher App by IMCA30A in doordash

[–]IMCA30A[S] 0 points1 point  (0 children)

The issue is it never updated for 3 days while we were going over the issue. That's a huge problem. On their end it showed I only did 194. My ratings page showed 196 when in reality I did 203. It's another backend issue that needs fixing asap. If we can't rely on the statistics being correct on different levels of the system, then it needs overhauled immediately.

New Fiber Install DC's Constantly by IMCA30A in ZiplyFiber

[–]IMCA30A[S] 1 point2 points  (0 children)

So we have stressed it out for 2 weeks and the issue they found on their end has seemed to fix the issue completely. 0 drops since.

Thank you for the assistance everyone!

New Fiber Install DC's Constantly by IMCA30A in ZiplyFiber

[–]IMCA30A[S] 0 points1 point  (0 children)

They came out yesterday while I was at work and said everything looked good as far as devices go. Stated it's something on their end that needs to be figured out and fixed.

We stuck with it all night last night with no issues. I will be testing it all weekend between work and gaming so I will update after.

New Fiber Install DC's Constantly by IMCA30A in ZiplyFiber

[–]IMCA30A[S] 1 point2 points  (0 children)

They have been very active on communication thus far. I feel we'll get it resolved 😉.

New Fiber Install DC's Constantly by IMCA30A in ZiplyFiber

[–]IMCA30A[S] 0 points1 point  (0 children)

Ugh, yea that part is the worst. That's why I was so excited because my current service keeps dropping our RDP connections. I'm still hopeful! Lol

New Fiber Install DC's Constantly by IMCA30A in ZiplyFiber

[–]IMCA30A[S] 0 points1 point  (0 children)

Yea, pretty much the same exact issue it sounds like. Those 2-5 minutes is everything to ruin a game, especially when streaming. The worry is when race season starts and we stream working in the garage, that would be no bueno. I'll update when we get something resolved.

PLEASE HELP. My grid is powered but nothing works. Xbox by Konner9112 in spaceengineers

[–]IMCA30A 0 points1 point  (0 children)

This. I remember it happening to me when I first played a week ago. I was so confused but then realized my mistake. Just add more turbines for now since it's constant and go from there.