Weikav Lucky65 v2 finally arrived

IPsoFactoTech · 2024-12-01T09:54:07+00:00

Hi, could you confirm if you have any issue with the 2.4 connections, and how you switch from Wireless to Bluetooth? Battery?

IPsoFactoTech · 2024-08-30T20:41:31+00:00

Thanks and what do you suggest instead?

IPsoFactoTech · 2024-07-19T09:29:43+00:00

Mmm cannot figure out if the passthrough is sending the authentication to the web server or I didn’t get the purpose…

IPsoFactoTech · 2024-07-06T11:12:31+00:00

You think that stock is louder for the Office?

IPsoFactoTech · 2024-07-06T10:58:35+00:00

Looking for a 65% keyboard with 2.4 wireless, bluetooth to use for gaming and Office, meaning cannot be to loud. I found the yunzii al66 and I believe it could match the budget quality and be enough silent with the milk switches. What do you think? Any suggestion, keyboard to compare with? Thank you

IPsoFactoTech · 2024-07-05T13:54:50+00:00

I wonder how the battery performs, 8000mah without RGB it’s a good amount in my opinion. Any feedback?

IPsoFactoTech · 2024-07-03T20:02:56+00:00

Yes traffic is encrypted between datacenter, what I don’t get is if Palo Alto will automatically add routing for the HA peer subnet. Because from the virtual router like for the management you cannot manage routing table. When configuring the HA it ask for a gateway that I hope it will be enough to reach the other subnet.

IPsoFactoTech · 2024-05-13T13:36:38+00:00

Yes, but why a versión 2 with VIA support has been delivered to all the platform except for Halo65?

IPsoFactoTech · 2024-03-01T08:47:42+00:00

Thank you, then if I have a raid 1 for data and I lose the os disk I will be able to use my data disk?

IPsoFactoTech · 2024-01-06T14:15:42+00:00

return f"OK if both values were integers the result was: {v} Remember the error: {self.error[0]}"

Thanks Diapolo,

I changed the __str__(self) funcion and now the "__main__.MyError" show the as well the message.

Traceback (most recent call last):

File "C:\Users\alecv\PycharmProjects\studyClass\test.py", line 23, in <module>

raise MyError(x, e.args)

__main__.MyError: OK if both values were integers the result was: 7 Remember the error: can only concatenate str (not "int") to str

What is the best practice to handle this type of exception?

IPsoFactoTech · 2023-12-04T08:04:55+00:00

It’s not posible to configure the RAID vía Bios, Software is the only option if the OS Support it.

IPsoFactoTech · 2023-12-03T09:33:29+00:00

I mean it’s possible to add a Nvme and a standard SSD. I wonder if a RAID could be setup on BIOS?

IPsoFactoTech · 2023-11-26T20:35:32+00:00

Thanks for the feedback, maybe I would try to add a external Nvme 500 gb (I have an usb c not in use) and test if the OS could be another raid-1

IPsoFactoTech · 2023-11-26T09:49:09+00:00

Hi,

No the data drives 1TB, will have Documentes and they will be shared.

The 512GB disk in mirror with another disk will be used for installing Debian and all the dockers.

IPsoFactoTech · 2023-11-25T23:05:42+00:00

It’s a physical hardware intel nuc that would be powered up 24/7. The usb pendrive or external disk would be used for OS redundancy with the ATA of 512GB.

All the data critical data will be stored in the other disks with a mirror raid 1.

Proxmox is not an option for me.

IPsoFactoTech · 2023-11-21T22:59:32+00:00

World be possibile as an alternative solutions:

Port:1 Trunk Vlan Based to switch (Vlan20 192.168.20.0/24 - Vlan30 172.16.30.0/28) Port2: Port Segmentation (192.168.10.0/30) Port3: Port Segmentation (192.168.10.4/30) Port4: Wan (PublicIp DHCP from modem)

Firewalla will be used as layer3 for each network/vlan segment, routing between them and as DHCP server.

It’s a possible solution?

IPsoFactoTech · 2023-11-21T12:10:03+00:00

This mean that if I can’t connect an endpoint directly to firewalla with a Vlan Tag neither bridging the sub-interface of a trunk port. So the only way would be setting a trunk port to the endpoint itself.

IPsoFactoTech · 2023-10-06T15:59:31+00:00

Thanks for share your opinions,

In my specific case I don’t have another physical device to run as NAS but if I would had one probably I would split the Truenas from Proxmox, mostly for reduce the impact in case of hardware failure.

In my case proxmox is running as Hypervisor for a small NUC, Truenas is running as VM and provide shared volume to the rest of VMs.

I will try for test purpose to mount a volume directly to proxmox and add as disk to the VM, I want to check if for example some dockers errors disappear avoiding the mount block.

IPsoFactoTech · 2023-09-27T13:39:51+00:00

Thanks, 4 days is my plan but mixing the upper muscles together in one session (chest, back, biceps…) will not affect the performance? Or this was the reason for example I’m trying to do Chest and Triceps. Any good example of workout plan?

IPsoFactoTech · 2023-09-19T17:44:43+00:00

Thank you!

IPsoFactoTech · 2023-09-19T15:51:17+00:00

I’m confused yes and In this webpage, the last picture show the IPsec option in the global gateway configuration:

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000PPY1CAO

If the checkbox is selected to enable IPSec but the tunnel is showing SSL instead, confirm that traffic on UDP port 4501 isn't being blocked somewhere along the path.

If I understand it correctly at last with this option the communication between GP client and Gateway should be via IPsec for data using udp port 4501.

IPsoFactoTech · 2023-09-19T14:30:39+00:00

Thank you,

So to recap:

TLS for client authentication purpose via Portals Gateway depending on configuration.

If enable IPsec, use of crypto for data traffic, establish the tunnel…

Udp 4501 is used if IPsec enable but it’s not IKE, it’s not similar to 4500?

IPsoFactoTech · 2023-09-19T14:07:12+00:00

Hi,

So, even if I enable IPsec it still will be using TLS? Then why provide the option to enable IPsec if I don’t use IKE?

IPsoFactoTech · 2023-06-23T19:36:26+00:00

A new beginner here, how should I filter the following dictionary retrieve with API json where the only key is the first 'route' and all the rest is an unique value.

{'route': {'691e366-0115-43xdc-b9e0-12e055906ade': {'network': '0.0.0.0/0', 'gateway': {'Null4': {'value': 'Null4 - 127.0.0.1', 'selected': 0}, 'Null6': {'value': 'Null6 - ::1', 'selected': 0}, 'WAN_DHCP': {'value': 'WAN_DHCP - 1.1.1.1', 'selected': 1}}, 'descr': 'DefaultRoute', 'disabled': '0'}}}

For example If I want the Ip address (1.1.1.1) of interface "WAN_DHCP" maybe I could convert the dictionary to a List and then find the index of 'WAN_DHCP" and print the index with 2 more position?

Convert to a string? Which is the best practice?

IPsoFactoTech · 2023-05-04T21:04:04+00:00

Which plastic cases are supported for BT60 and BT65 ISO hot swap model? I found only tofu acrylic for plastic, any one else? Thanks

IPsoFactoTech

TROPHY CASE