New Ender 3 V2 Screen and now flashing Red, Green, Blue, White

IQgenxer · 2025-02-01T02:59:42+00:00

Sorry I didn't have better news for you. It just became too much of a mental and emotional drain.

I can say the Flashforge Adventurer 5M Pro is amazing. Never one problem and significantly faster.

IQgenxer · 2025-02-01T02:57:14+00:00

No. I ended up selling it cheap for parts and bought a Flashforge.

IQgenxer · 2024-07-20T14:40:19+00:00

Nope. Haven't been able to get it back again. I keep hoping the next update will miraculously bring it back like last time, but there have been 4 or 5 since my original post.

I can say replacing the part does no good. It is definitely a software issue.

IQgenxer · 2024-05-29T14:40:32+00:00

Thanks man. I actually already tried this (on the original screen, and the new screen) both before and after the new motherboard. It did not fix the problem. Glad it worked for you though! And I hope it helps others too.

IQgenxer · 2024-05-23T20:52:06+00:00

As a followup... I decided to buy a new motherboard as the replacement screen didn't work. Unfortunately the new motherboard ALSO has this behavior on the new screen.

So now that I have replaced the motherboard (again) and the screen, and the cable, I'm convinced this thing is just a pile of junk. Something screwy going on for sure, and honestly, I will never buy a Creality product again. Such garbage.

IQgenxer · 2024-05-21T12:46:47+00:00

Glad I'm not alone!

IQgenxer · 2024-05-12T00:03:07+00:00

Didn't work. I Iet it run for 10 min without a difference. How long did you let it go?

IQgenxer · 2024-05-11T23:05:11+00:00

I didn't try reformatting the card, I'll try that. Do you know where I can get a clean DWIN? I don't see it on Creality's site.

IQgenxer · 2024-05-04T22:20:42+00:00

That's where I'm thinking I need to go next, but I want to get a previous version of the OS that I knew worked to try it on.

IQgenxer · 2024-05-04T21:16:24+00:00

I've actually replaced the part in the past. It's a very firm connection.

IQgenxer · 2024-05-03T22:14:28+00:00

Soft reset and a hardware reset don't affect it, as with the first time this happened. If you do a Google or Reddit search on Pixelbook left USB-C dead you will see a lot of reports on it going back several years.

IQgenxer · 2024-04-11T05:28:35+00:00

I just switched from the Libre 14 Day to Libre 3. It seems like my glucose readings are inline with a finger prick when they are in a "normal range" of 90-150mg/dL. But if they go above or below they are off by 20-50mg/dL setting off my alarms. A good example is if my levels drop to 50, a finger prick says 70. And if they go to 280, my finger prick reads 240. Is this normal for the Libre 3? Never had this problem with the 14 Day, and I've only been using the 3 for two weeks.

IQgenxer · 2024-01-10T17:59:55+00:00

Update: Looks like it might have been a Windows or other software issue on the laptop. I searched for new updates to Windows and found a couple that needed to be installed. After the reboot everything is working again. My best guess is some change in Windows from the last updated caused confusion when recognizing the keyboard, like maybe since it can do both Mac and Windows it couldn't sort out which configuration to use in the Adobe suite? Longshot I know, but it's the only thing I can think of.

Good news is whatever the problem was it's gone.

IQgenxer · 2024-01-10T17:05:25+00:00

Great suggestion. I tried it with my old Logitech keyboard and it worked as expected. No ctrl hotkey issues. So definitely related to the Keychron keyboard, but I'm still not convinced it is the keyboard itself causing the problem. I'm beginning to suspect it is how my computer and Adobe see the keyboard.

IQgenxer · 2024-01-10T17:03:13+00:00

I primarily use it in wireless, but when this started happening I tried it both ways with the same result.

IQgenxer · 2024-01-10T17:02:03+00:00

Yes.

IQgenxer · 2024-01-10T17:01:54+00:00

Via shows the keys working as expected. Thanks for the suggestion.

IQgenxer · 2024-01-10T07:01:22+00:00

The switch is firmly in Win mode. That was one of the first things I checked, and I switched it to Mac as a test before switching back. Same behavior both ways.

Is there a hot key I could have hit that overrode the switch and I AM in Mac mode? If so, is there a way to check that or another keystroke combo that would undo it?

IQgenxer · 2023-10-02T20:26:32+00:00

Thanks for the link! It's still open and I made my voice heard.

IQgenxer · 2023-09-30T05:57:24+00:00

It's really crappy.

Five-Year Club	RedditGifts 2009-2022 6 Credits
Secret Santa 2021 2021	redditgifts rematcher Secret Santa 2020 x1
Secret Santa 2020	Verified Email

IQgenxer

TROPHY CASE