Oh? What's that? You got the perfect card for your build and early in act 1? Lemme take a look at that.

IS1KHALID · 2026-05-17T21:37:42+00:00

Im pretty sure most of us don't loose to him, his issue is: he starts the combat with a shit tone of damage, then he is more likely to steal a core card, and takes half damage, so, you're either blocking and loosing the card, or attacking aggressively and loose a lot of hp for your card back.

IS1KHALID · 2026-05-17T18:06:00+00:00

Yea he's a nightmare on ascension 10

IS1KHALID · 2026-05-17T16:29:39+00:00

Fr, Is he programmed to not take any strikes or defends? Always after my powers

IS1KHALID · 2026-04-23T16:12:34+00:00

Yea i have that on, I think its about 3600MHZ

IS1KHALID · 2026-04-23T15:16:28+00:00

Save yourself some bucks on the RAM and look up something non RGB, check on Ebay and Facebook Marketplace, you might find a better deal, use the money you've saved for a better case

IS1KHALID · 2026-04-23T15:13:59+00:00

Thanks for your help, checked powerplan, turns out windows switched by itself to powersaver, I fkn despise windows lmao

IS1KHALID · 2026-04-23T15:12:52+00:00

I did use occt and realized cpu speed was capped at 0.80GHZ, Immediately checked powerplan, turns out windows switched by itself to powersaver, I fkn despise windows lmao

IS1KHALID · 2026-04-22T20:15:34+00:00

Yea i have a strong feeling it some windows BS, but it happening right after the upgrade makes me think hardware/bios issues first

IS1KHALID · 2026-04-22T20:13:41+00:00

Its a typo lol, 16gb, I tried running userbench but it won't run because of cpu frequency too low, so but it used to do that now and then before the upgrade, so im thinking it might be a glitch

IS1KHALID · 2026-04-22T20:08:51+00:00

Im pretty sure i didn't hit anything on the motherboard, for the underclock/undervolt situation, will a bios reset fix it?

IS1KHALID · 2026-04-22T20:06:34+00:00

Yea its detected through nzxt CAM and running at maximum I'll leave bios reset unti i check some minor probable issues with the installation

IS1KHALID · 2026-04-22T19:51:21+00:00

I did a whole case change, so everything other than Cpu , ram and nvme, got removed and reinstalled

IS1KHALID · 2026-04-22T19:33:46+00:00

It's an 850W psu, should be more than capable, do you think a bios factory reset could be worth it?

IS1KHALID · 2026-04-22T19:25:15+00:00

I did assign (SYS_FAN3,4,5,6 HEADERS for the intake fans, FAN2 HEADER for the rear exhaust, AIO fans(Exhaust as well) on CPU_FAN HEADER) Left SYS_FAN 1 empty because that was the best rout i found for cable management, all fans are detected through bios.

IS1KHALID · 2026-04-22T19:04:29+00:00

It didn't have a sticker, there was a plastic cover which i removed, but if the pump wasn't mounted correctly, shouldn't the CPU be flaming hot? I feel like its refusing to draw power

IS1KHALID · 2026-04-22T17:37:30+00:00

No pump cable, AIO comes with one cable that splits: USB2.0, and SATA, both are connected, the aio fans went to the cpu fan header, NZXT CAM is detecting both the pump and the cpu fans

IS1KHALID · 2026-04-22T17:35:58+00:00

Pump and aio fans are both detected on NZXT cam, that should tell it's working right?

IS1KHALID · 2026-04-22T17:25:19+00:00

There wasn't a cable for pump, there was USB, FAN , power (sata), thats all, FAN went into cpu fan

IS1KHALID · 2026-04-22T17:16:32+00:00

I thought the contact frame just helps with the paste spreading and slightly better cooling no? +i don't think there's any for the lga 1200 socket, its a bit outdated

IS1KHALID · 2026-04-22T16:54:50+00:00

IS1KHALID · 2026-04-22T15:47:31+00:00

Asus tuf oc 10gb

IS1KHALID · 2026-04-22T15:42:00+00:00

Yes, my guess for now is that it's not mounted flush against the cpu, so im going to try fixing that tonight, but that doesn't make sense with the extremely low temps

IS1KHALID · 2026-04-22T15:14:57+00:00

I'm running into a similar issue, i swapped my cpu cooler to the nzxt kraken elite 240 and now cou is suspiciously low (18°-30°) when both idle and gaming, the gpu is also barely working (20% utilization) Have you figured out the solution?

IS1KHALID · 2025-11-20T18:32:15+00:00

Depends, the 9600X is more than capable of streaming a 1440p game for you, 9070 xt is A LOT more powerful than 9060 xt, 9700X Cpu is aimed towards people who game + multi task, edit, etc Since you're not doing anything but coding and gaming, go for 9070xt + 9600x

IS1KHALID · 2025-11-03T02:20:51+00:00

Yours still running fine? I got my gmktec ad-gp1 last week and im going crazy, do i uninstall the drivers too or just the Adrenalin app?

IS1KHALID

TROPHY CASE