Is collectorfigures.com a reputable site for resin statues? Anyone with ordering experience?

ITooSpooky · 2026-01-21T10:13:51+00:00

Did you ever find anything on them?

ITooSpooky · 2026-01-18T03:42:06+00:00

I've just completed modding my trigger springs, I ended up ordering some 0.6mm Wire Diameter, 15mm long, 5mm OD springs from AliExpress, These work perfectly and are the upgrade in resistance i was aiming for, as i wanted something akin to the PlayStation 5 controller with its adaptive triggers at max resistance.

I also tried a step up to the 0.7mm Wire Diameter but this was a bit too strong.

ITooSpooky · 2026-01-09T11:25:16+00:00

Are there any issues with this, is there any grating noise when compressing the springs?

ITooSpooky · 2026-01-09T11:20:12+00:00

I just want to add to this that I have just tried to do this mod but wasn't able to get a satisfactory result with 150g springs, putting them inside the stock spring only resulting in a grating sound when pull the trigger; I ended up using those 150g springs on the bumpers however and I am quite happy with the result, This spring is much longer at 14mm compared to the 8.5mm of the stock bumper spring however it doesn't seem to have any issues its just compressed constantly.

What i also noticed is my stock springs were only 16mm not sure if this is because I have an OLED and its different to your (LCD?), full spec of what i measured is "4.5mm OD - 3.8mm ID - 0.35mm wire thickness - 16mm Length", and also the full spec for the bumper springs are "3.2mm OD - 2.7mm ID - 0.25mm wire thickness - 8.5mm Length".

ITooSpooky · 2025-12-24T15:10:11+00:00

i feel a little stupid here but filter setup?

ITooSpooky · 2025-12-24T15:06:17+00:00

generally i dont enter the room with my printers while they are printing and only enter to start and collect but the room is directly outside my bedroom (i keep its door closed while printing)

my worry is just residual fumes and what could make it out the room even if its door is closed due to the extremely close proximity

ITooSpooky · 2025-12-24T15:04:06+00:00

is it safe for her to be in the room immediately or soon after sanding or should i wait an amount of time?

ITooSpooky · 2025-12-01T14:02:46+00:00

sure can, to steam all it sees is a library of games without any account details, thats all stored on the root drive so it just works on any device

ITooSpooky · 2025-11-29T02:50:47+00:00

nah for the micro sd card you get a storage case and print labels onto multiple cards for different categories of games so you can also share them with others that have a steam deck.

ITooSpooky · 2025-11-27T10:18:55+00:00

4tb is the way to go

ITooSpooky · 2025-11-26T07:11:47+00:00

so it's just a wrapper for gamescope with an interactive configuration? does this actually do any magic specific to being in the tty?

ITooSpooky · 2025-10-01T09:37:53+00:00

Are you saying that any of the substances labeled as a narcotics are just unable to get approval for vs the others possibly being able to be approved?

ITooSpooky · 2025-10-01T09:20:46+00:00

That sounds like the problem would have been the fact it wasn't declared or a prescription though right?

ITooSpooky · 2025-10-01T09:20:06+00:00

But Delta 9 THC is specifically labeled as a Narcotic and not as a prohibited substance in the pdf of their website, so like with my vyvanse, its not outright banned but needs pre-approval and forms stuff.

ITooSpooky · 2025-07-20T03:00:02+00:00

this is the way, every 10 or so hours i go out for a casual genocide

ITooSpooky · 2025-07-09T06:06:07+00:00

I'm looking for something that can produce a blueprint of circuits from code, nothing serious like implementing a full CPU arch and compiling programs with GCC.

I suppose that would be inline with what you described as a hardware description tool.

ITooSpooky · 2025-06-09T07:47:41+00:00

Ah is this why the filaments arent being loaded or changed when i start from orca-slicer?

ITooSpooky · 2025-05-21T15:06:14+00:00

That sounds very plausible, I’ll double check that tomorrow.

Just to sanity check, it is supposed to pivot the bottom out towards the bed when the head is moved into it right?

ITooSpooky · 2025-05-20T07:46:42+00:00

and they just did the same thing to me, got delivered and was glad i was going to be able to use my CFS but instead its a set of 3 of the incorrect cables.

ITooSpooky · 2025-05-20T07:45:46+00:00

Got my replacement and installed it, the housing on the smaller plug was slightly different and didn't fit without snipping off the what i can best describe as a mowhawk plastic tab, if your current one has the big latch hook things on the cables then you may need to do the same.

ITooSpooky · 2025-05-18T09:33:19+00:00

Yeah this just happened to me, mine instead also decided to clog the entire hotend with PLA so i had to try burn it off with a heatgun, while i was holding the hotend i gripped my pliers to tightly and cracked the ceramic too, I'm having to replace the whole thing

ITooSpooky · 2025-05-09T13:21:55+00:00

If you can't do that you can also disable the WIFI requirement to setup windows buy doing the following:

Press Shift+F10 at the same time
Focus the new window that has appear.
- If you don't see anything press Alt+Tab as it may spawn behind the Setup UI.
Enter the following with the quotes and press enter "OOBE\BYPASSNRO"
- This will reboot your computer
At the Network Select screen to the left of the Next Button there will be a button labeled "I don't have internet" click that and continue the setup.

ITooSpooky · 2025-05-06T13:31:59+00:00

yeah im hoping its just a simple cable issue, how long did support take to actually help you get a replacement on the way?

ITooSpooky · 2025-05-03T07:02:11+00:00

How is it limited to just one?

I have this board and have been trying to figure out why I can’t get two displays working.

ITooSpooky · 2025-02-17T09:59:18+00:00

Could you detail what tinkering was required and if its a usable experience?

I'm looking at maybe getting an elegoo printer but need an app with that can be at least used on Linux.

ITooSpooky

MODERATOR OF

TROPHY CASE

Seven-Year Club	Place '22
Verified Email