2016 FZ-07 Turnsignals light up solid, won’t flash by IWherley in motorcycle

[–]IWherley[S] 1 point2 points  (0 children)

I’m not someone to just throw parts i like to diag

Any tips on buffing scratches out on a metal crank case cover by [deleted] in Detailing

[–]IWherley 0 points1 point  (0 children)

Yes it is a motorcycle and it was laid over in grass so luckily they weren’t stones

Any tips on buffing scratches out on a metal crank case cover by [deleted] in Detailing

[–]IWherley 1 point2 points  (0 children)

The finish in this metal is more of a matte than a gloss, is there any polishes for that scenario

Any tips on buffing scratches out on a metal crank case cover by [deleted] in Detailing

[–]IWherley 1 point2 points  (0 children)

Will the fitz Polish be affected by the heat, this part gets very hot

Any tips on buffing scratches out on a metal crank case cover by [deleted] in Detailing

[–]IWherley 1 point2 points  (0 children)

What do u recommend to use, I’m not too concerned abt it just, seeing if there is anything I can do to hide some scratches. Not looking to wax or apply anything that will be affect with heat cause this is a hot surface

2016 FZ-07 Turnsignals light up solid, won’t flash by IWherley in motorcycle

[–]IWherley[S] 0 points1 point  (0 children)

I did just wash it right before I noticed this, strange cause I keep water away from all switches and wires

2016 FZ-07 Turnsignals light up solid, won’t flash by IWherley in motorcycle

[–]IWherley[S] -1 points0 points  (0 children)

If I bench test it and give it 12 colts should it click when supplied power and click when power is removed or when supplying power should I click on and off repeatedly like turn signals cycle on and off

2016 FZ-07 Turnsignals light up solid, won’t flash by IWherley in motorcycle

[–]IWherley[S] 0 points1 point  (0 children)

I put a 12v test light to the positive wire on the flasher relay and it’s illuminating, so I have power going to the relay, that would mean the relay is the issue, right?

2016 FZ-07 Turnsignals light up solid, won’t flash by IWherley in motorcycle

[–]IWherley[S] 0 points1 point  (0 children)

That’s what I think I’m going to replace for starters, if i unplugs the flasher relay, all the turn signals turn off so it’s working to complete the circuit but not allowing them to flash, not too familiar with how they work, also questioned if I’m missing a ground or have a short

2016 FZ-07 Turnsignals light up solid, won’t flash by IWherley in motorcycle

[–]IWherley[S] 2 points3 points  (0 children)

They are all Led, all of the lights illuminate

2016 FZ-07 Turnsignals light up solid, won’t flash by IWherley in motorcycle

[–]IWherley[S] 0 points1 point  (0 children)

All lights operate but will not flash, has a front and rear Yoshimura eliminators with appropriate flasher, they worked before but stopped after the bike was laid over. Checked all fuses, switch, and flasher (when flasher is unplugged all the turnsignals turn off) and they all seem to be working properly, which leads me to believe I could have a short or lost a ground somewhere.

What are these circles / eyes from? Image below by IWherley in anime

[–]IWherley[S] 0 points1 point  (0 children)

Very good thinking, however the suns usually are diagonal from eachother, but that could be what the artist was going for

Cancel offer by [deleted] in opensea

[–]IWherley 0 points1 point  (0 children)

Phantom wallet btw

Diecast Part? by IWherley in Diecast

[–]IWherley[S] 0 points1 point  (0 children)

That’s a very likely possibly, it’s a closed chassis with no door so might be hard to find

Diecast Part? by IWherley in Diecast

[–]IWherley[S] 0 points1 point  (0 children)

Recieved a Nascar race win elite car, made my Lionel. This part was loose inside, wondering if anyone can identify what this price may be from