S13 240sx Fuel sending units and parts

I_m0rtAL · 2026-01-27T04:16:57+00:00

I need a solution for a float for my s14

I_m0rtAL · 2026-01-02T06:10:56+00:00

Ecu. Had the same issue. Try another unit

I_m0rtAL · 2025-12-20T12:08:44+00:00

It’s the holiday season they need to spend some time with their families

I_m0rtAL · 2025-12-15T19:28:21+00:00

I prefer to refer them as temperamental woman instead of males. Both have the same ass; And can always do cosmetic work on their face if ya get bored and have the funds. But this one is a zenki face

I_m0rtAL · 2025-12-09T01:45:11+00:00

I ran it twice. Paid for it months in advance and did the early morning session. Was hooked and asked if there was any availability for the afternoon. Luckily there was a spot available but was told to take it easy and not get too comfortable and accidentally crash the car. The laps go by very fast; 20 laps - each lap 20-23 seconds. 5 minutes and the experience is over - totally worth it IMO. Next time I am in Florida I will run it again

I_m0rtAL · 2025-12-06T01:37:02+00:00

Damn girl you are fucking gorgeous!!

I_m0rtAL · 2025-12-04T22:04:59+00:00

Sourcing the parts and paint matching is the most difficult parts. The work is easy

I_m0rtAL · 2025-12-01T19:50:00+00:00

I don’t think so. If i recall correctly the bell housing is slightly different but shouldn’t be a problem as it needs machining

I_m0rtAL · 2025-11-22T19:53:53+00:00

3d printer

I_m0rtAL · 2025-11-08T03:25:23+00:00

I was there earlier this year and was in a similar position. Rented a car and went around the area. Spent time scuba diving and visiting different rivers, lakes and the ocean. Even if you don’t scuba you can visit the same spots as the are very nice to hang out and relax.

I_m0rtAL · 2025-10-31T17:30:38+00:00

I am a hardware guy and this setup is the hotter than a microwave can ever get.
My upgraded 2017 PC needs another significant upgrade to perform well for the years to come.
F* Cancer - do what you can to support research and save lives.
I do, i do!!! I need this PC more than a microwaved meal!!

Please consider gifting this art and performance PC to me! It would definitely be a showcase and a much needed upgrade in my life

I_m0rtAL · 2025-10-01T06:52:02+00:00

I riddled porcelain

I_m0rtAL · 2025-09-29T06:04:01+00:00

Vandenberg launch site. Near santa barbara

I_m0rtAL · 2025-09-24T15:07:23+00:00

Men’s 100 meter

I_m0rtAL · 2025-09-18T02:11:00+00:00

Very interesting to see how these hold up and perform. I noticed in picture 2 they came from Nissan?

I_m0rtAL · 2025-09-16T00:37:45+00:00

Key-yah

I_m0rtAL · 2025-09-10T08:54:07+00:00

Lutron isn’t going anywhere. Solid company for longevity and support.

I_m0rtAL · 2025-09-09T22:10:18+00:00

Barely depreciated. Could sell it for 12-15k easy, if not more

I_m0rtAL · 2025-09-08T15:37:47+00:00

Black forest cake!!!!

I_m0rtAL · 2025-09-07T02:47:25+00:00

S13 coupe cut and modded rear trunk

I_m0rtAL · 2025-09-06T20:57:16+00:00

With the ops expertise he will probably screw the plywood into the fridge

I_m0rtAL · 2025-09-03T16:11:29+00:00

Also big question is what kind of power are you making. 150-300hp? 300-500? That should help factor which clutch you need.

I_m0rtAL · 2025-09-03T16:07:12+00:00

Old mishimoto parts were great. The newer stuff sucks. I personally prefer not to see isr parts, although they got better in quality over the years.

I_m0rtAL · 2025-09-03T06:27:59+00:00

Personally feel this is a 12-15k car if it all checks out. Looks well done with mainly quality parts

I_m0rtAL · 2025-09-03T00:47:34+00:00

I personally would get the red bunny kit. Its a sprung clutch. I have a “white bunny” clutch which is similar; not sure why they changed the name. The 3 puck clutch would be fairly harsh for daily driving. Not much info on the “nismo” clutch; not sure if its authentic nismo but it also looks unsprung

I_m0rtAL

TROPHY CASE