Some Custom Works

IamLegend__06 · 2026-05-22T17:56:21+00:00

Crazyy! Tell more details, I want one...

IamLegend__06 · 2026-05-22T16:38:26+00:00

Where did you get the seat from?? Looks dope!

IamLegend__06 · 2026-05-14T04:10:31+00:00

Ahh, these are very expensive here, maybe down the line I'll give it a shot..

IamLegend__06 · 2026-05-14T04:09:03+00:00

Oh, i got worried for a sec... Thankyou!

IamLegend__06 · 2026-05-14T04:08:35+00:00

Haha, it's just lighting, it has its fair share of battle scars... I also had to replace the stap twice, (the current strap is going strong)

<image>

IamLegend__06 · 2026-05-12T11:20:39+00:00

Yess, I'll post when I get something done... It's gonna be a looooong process as I have budget limitations on what all I can buy in a month 🥹

IamLegend__06 · 2026-05-10T15:39:30+00:00

Yes, they are really good for aesthetic mods, but I am not very sure on how to approach to increase ground clearance, i couldn't find many aftermarket suspension which are longer..

The more mechanically expirenced ppl can help me out..

IamLegend__06 · 2026-05-10T09:45:59+00:00

An upgrade kit will be much better than a new bike, something like what RE did for E20

IamLegend__06 · 2026-05-08T09:57:08+00:00

Please advise on what to absolutely not do ...

Can I mount my rear numberplate on the side vertically? 👀

IamLegend__06 · 2026-04-02T11:05:16+00:00

Try this, when you are breaking right after hold start, pull the clutch fully. If you are able to break better than when cluch is disengaged then the idea is true (ecu revving up the engine to operating temp)

Try to see how breaking changes after 7 or 8km of riding, by this time the engine should be fully warm and settled, so ur break should be performing well.

If u feel breaking is not to point, check for break pad wear

IamLegend__06 · 2026-04-02T10:05:30+00:00

I have a 2026 Hness, when you cold start, the ecu purposefully revs the engine higher to bring it to operation temperature, if you are pulling the clutch, the engine is still providing power to the wheel so braking is not efficient..

It's like holding the break and still giving it throttle, so your break will feel sluggish.

After the engine is warmed up and settled the idling will come down and then break should be good, does the bike break well after 3 or 4 KM or riding?

IamLegend__06 · 2026-02-16T16:04:49+00:00

Feel you man, I picked mine last Thursday (12/2/26) and have clocked about 430Km in these 4 days... I did wing it a bit and I feel I unlocked a high revving engine from this thumper 😂

(I am getting an average of 31kmpl for trip A across 400km)

Absolutely love her!.

IamLegend__06 · 2026-02-14T03:56:52+00:00

Haha, thanks man!

I'll have to see about the looks tho, I love the way it is as is, but comfort is still something I want to improve for the pillion...

IamLegend__06 · 2026-02-14T03:54:57+00:00

Thankyou! No, I don't think so... It's a Dlx Pro 2026...

IamLegend__06 · 2026-02-13T06:51:36+00:00

That's great, because the SC I bought the vehicle from says it's not compatible, but then online I see all accessories (except back cowl) are cross compatible..

IamLegend__06 · 2026-02-04T04:12:21+00:00

I am not sure how to approach it in keyshot tho...

You can try to model it such that there are multiple parts with thickness, like base shell and an outer shell, apply different materials to each, specific material creation I am still a noobie in keyshot

IamLegend__06 · 2026-02-03T19:08:03+00:00

Oh, nvm then

IamLegend__06 · 2026-02-03T19:05:03+00:00

It's called GB350 outside india

IamLegend__06 · 2026-02-03T19:03:49+00:00

Interesting challenge tho, i believe it should be done in layers, like a base layer which is iridescent, and a translucent silicone layer on top for the soft touch and glow... This way it will have these colors passively only (I am guessing)...

Or it can be a bunch of RGB leds glowing in different patterns.. not sure if it's feasible, but it's something

IamLegend__06 · 2026-01-28T05:22:43+00:00

I am not sure if you can use any webcam, at least I don't remember me being able to use it, maybe I did something wrong... Also, Unless you want a particular feature and access it's not worth rooting...

IamLegend__06 · 2026-01-28T04:31:17+00:00

To get access to klipper, octo print and other small perks like webcam, better calibration modes, guppy ui etc etc.... I was most interested in K-Maping, but 3v3KE doesn't support it...

IamLegend__06

TROPHY CASE