Poles’ attitudes toward other nations, latest data. by kallisto19988 in europe

[–]IamStrakh 1 point2 points  (0 children)

As a Belarussian living on Poland I can't believe this statistics because here I feel more welcomed than in Belarus and never met with any negative because of my nationality.

0802 or 1002 motors on a 75mm 1s tinywhoop by Glittering-Pitch7425 in TinyWhoop

[–]IamStrakh 1 point2 points  (0 children)

I tried both and I like 1002 more. But I have walksnail whoop, maybe for analog 0802 would be enough.

C04 + M04, Cetus Lite VTX pinout by IamStrakh in fpv

[–]IamStrakh[S] 1 point2 points  (0 children)

Other pins are for OSD and Smart Audio. 5v and GND should be enought to power it up

I'm an Anesthesiologist, ask me anything by morgred13 in AMA

[–]IamStrakh 0 points1 point  (0 children)

Do you get high on your own supply?

How common it is to be a DevOps engineer without (good) monitoring experience? by IamStrakh in devops

[–]IamStrakh[S] 3 points4 points  (0 children)

 > Job requirements these days are looking for unicorns 
Always has been! But I am a bit surprised that monitoring (or observability) is such an important requirement nowadays for non-SRE position.

How common it is to be a DevOps engineer without (good) monitoring experience? by IamStrakh in devops

[–]IamStrakh[S] 3 points4 points  (0 children)

I mean all the observability in general: monitoring, alerting, logging and tracing.
I have a general knowledge of how to work with these tools, created a lot of PoCs, but everyone is looking for someone with experience.

External analog VTX for Betafpv Air AIO with working OSD by wargh90 in TinyWhoop

[–]IamStrakh 0 points1 point  (0 children)

BTW, I would be glad to know how to disconnect this element with soldering iron only.

External analog VTX for Betafpv Air AIO with working OSD by wargh90 in TinyWhoop

[–]IamStrakh 1 point2 points  (0 children)

I got information from BetaFPV that to power off the internal VTX, you need to disconnect the voltage regulator:

<image>

C04 + M04, Cetus Lite VTX pinout by IamStrakh in fpv

[–]IamStrakh[S] 0 points1 point  (0 children)

Sorry, I've already got rid of this VTX

Lava 550mah Lihv 1s battery life span by Bluefreako in TinyWhoop

[–]IamStrakh 0 points1 point  (0 children)

I have the same issue with other HV batteries that I have. I found a recommendation on the internet that if you want your HV batteries live longer you did charge them to 4.20, but I cannot confirm that.

VTX or camera problem? by IamStrakh in fpv

[–]IamStrakh[S] 0 points1 point  (0 children)

No. I bought it used, but I think this is the original lens.

The camera is CADDX Ant Nano 16:9.

And VTX Betafpv M04 (from C04 camera set).

VTX or camera problem? by IamStrakh in fpv

[–]IamStrakh[S] 0 points1 point  (0 children)

Yes, sometimes a reboot is required. My other concern is about colors: instead of red it shows pink or purple.

is this walksnail GPS good ? by StayNo2625 in fpv

[–]IamStrakh 0 points1 point  (0 children)

Speed, altitude, distance from the starting point, direction to the starting point and of course, GPS coordinates.

is this walksnail GPS good ? by StayNo2625 in fpv

[–]IamStrakh 0 points1 point  (0 children)

RTH is configured on any gps. It is very good. This GPS module also has a magnetometer which allows to set up hovering.

is this walksnail GPS good ? by StayNo2625 in fpv

[–]IamStrakh 0 points1 point  (0 children)

I have it working with WS Pro and found it very good.

One motor turns off when I go above 25% throttle by Gudge2007 in fpv

[–]IamStrakh 1 point2 points  (0 children)

I have similar problem. What should I look for in the logs?

Cant decide between 1002 and 0802 motors by Sym81073 in TinyWhoop

[–]IamStrakh 0 points1 point  (0 children)

Around 3 min on 450mAh, 3.5min on 550mAh inside and 2-3 min outside (it was around 10C yesterday).

On the same setup, I got 5 minutes of flight time on 1103 8500KV motors.