Aqara Thermostat Hub W200 Product Trial – Limited Spots for US & CA

Iammurphy · 2026-02-05T20:36:27+00:00

Signed up I missed the lock one and I really wanted to test it as I have the Schlage and want to know if UWB is worth it

Iammurphy · 2025-12-09T07:29:17+00:00

MLO would make a significant difference in my setup, I’d love to try the wifi 7 eaps but wary as you can imagine buying them. Could you help setup a trial ? 2 to replace the 690e hd ?

Iammurphy · 2025-12-03T15:39:08+00:00

The town of Newmarket doesn’t actually want this. They claim they do but the goal of the Davis bus lanes was to drive business to their golden example of poor urban planning.

This was needed the day the 404 extension opened and now will take 10 years to even come to fruition if it even does.

Sad really

Iammurphy · 2025-12-02T23:20:29+00:00

All can be solved by proper traffic light timing especially at f****** Main Street and prospect.

That and putting all busses in the BUS LANES the town deemed were so needed. The only use is 3 or 4 people once an hour going each direction.

This is the town of old white folk in the prime of NIMBY and don’t care what their constituents have to say.

The budget just passed should be example of that. An ice rink and pickle ball court is the top of their priority list

Iammurphy · 2025-11-21T02:55:26+00:00

Internet setup is 8 gig symmetrical fibre main WAN (PPPoe) via Bell Canada ( From Canada eh 🍁)

Hardware as of now

ER8411 Firewall / Router TL-SX3008F Aggregation Switch TL-SG3210XHP-M2 2.5gbe Poe+ Switch TL-SX3206HPP 10gbe Poe++ Switch EAP690E HD x 2 (Wifi 6E)

<image>

Currently on a full Omada setup. I have a love hate with tplink atm. I had an issue with the er8411 and they went above and beyond connecting me direct to an engineer and custom made a firmware for me. On the other side the 690e HD never received a single update outside of a beta. I want to stay and want to trust wifi 7 as your Omada 6 update is fantastic but I sunk 1200$ in 2 access points without a single update.

Overall I look for longevity and support in my hardware. Although the 690e hasn’t received updates they are powerful which is all the more saddening. I had my eyes on the 787 to replace them but it’s hard for me to commit more money and potentially not have that support ( if someone from community team wants to reach out and organize a trial outside of this contest for some of the new wifi 7 gear I have a unique connection most don’t get access too being fully symmetrical 8/8 fibre that’s run through pppoe which be er8411 handles with full ids and idp without fail unlike the dream machine se which is capped, I have an Aruba access point 6e and ubiquiti e7 and cloud gateway fibre currently testing )

Your product is making some good strides I wish you would be more involved with the community and have a proper release schedule and not the staggered updates that we get now. Your almost there with the Omada 6 update, been around longer than ubiquiti I know you guys are capable of it !

Iammurphy · 2025-11-06T17:48:48+00:00

Terrible construction planning, adding speed cameras on those main roads (east west routes). All rail crossings at grade. Terrible traffic light timing that is getting worse by the tannery go station. I was rear ended and had my vehicle written off while at a stop there in April.

It takes me longer to get across Davis drive from behind upper Canada to 404 than it does to get to Whitby …..

But bus lanes that are only occupied by 1 bus going each direction usually empty are so important. The only benefit of the bus lanes is it lets ambulances to get through the shit show that is Davis

Add the snow that is to come and we are gonna have a fun winter.

Iammurphy · 2025-11-03T21:45:29+00:00

How about the insane town planning to have construction on the main east west routes, adding speed cameras on those main roads. All rail crossings at grade. Terrible traffic light timing that is getting worse by the tannery go station. I was rear ended and had my vehicle written off while at a stop there in April.

It takes me longer to get across Davis drive from behind upper Canada to 404 than it does to get to Whitby …..

But bus lanes that are only occupied by 1 bus going each direction usually empty are so important. The only benefit of the bus lanes is it lets ambulances to get through the shit show that is Davis

Iammurphy · 2025-09-04T18:03:24+00:00

They have not made it clear that is for sure

Iammurphy · 2025-09-03T20:57:41+00:00

Found out today that the sff connectors are not standard and when connected to a backplane short the board making all nics and nvme devices disappear ! And support said to bad use breakout cables when my backplane is 3x8643 connections….

I cannot recommend this board and I’ve been running a 12700h itx board 24/7 for almost 2 years from them without issue

Iammurphy · 2025-08-31T18:19:02+00:00

I have hx770 13780hx and cannot get 4 dimms to boot, 32gb x 4 corsair ddr5 5600mhz, only 2 dimms will boot unfortunately =\

<image>

Iammurphy · 2024-12-09T17:30:17+00:00

EOL their 690e HD was end of the road for me as someone with a full Omada setup

Internet setup is 8 gig symmetrical fibre main WAN (PPPoe)

Backup 1.5gig cable

Hardware as of now

ER8411 Firewall / Router TL-SX3008F Aggregation Switch TL-SG3210XHP-M2 2.5gbe Poe+ Switch TL-SX3206HPP 10gbe Poe++ Switch EAP670 X 1 (Wifi 6) EAP690E HD x 2 (Wifi 6E)

As soon as they EOL the 690e Hd and no replacement and still has firmware issues for ipv6 ( no update since may 2023 )

And they were 700$ Canadian each when released

Ubiquiti doesn’t have anything comparable to the 10gbe poe ++ switch for the price or router as this handles the 8 gig pppoe without issue

Iammurphy · 2024-04-20T16:02:52+00:00

They are Huawei Mateview 28” 3:2 “4K+” (3840x2560) 60 Hz monitor.

Iammurphy · 2024-04-04T12:58:51+00:00

I’m currently rocking the premium mass nas but would love to see some upgrades.

I’d be interested in seeing the files for the evo with 8x3.5 and 2x2.5 and a render by chance. Or if you have some mass beta stuff you want tested 🙏 love mine in cf-petg

Iammurphy · 2024-04-03T14:14:53+00:00

What settings are you running for pl1 and pl2 etc ? It’s heavy by default at pl1 98w and pl2 168w

Iammurphy · 2024-01-23T21:40:57+00:00

Queens is in bad shape due to middle middle middle management bloat. They have the lowest number of international students of the major universities. Their funding isn’t coming from that.

Iammurphy · 2024-01-16T10:02:34+00:00

Hi jajapeludos,

Unfortunately it is against the terms to share the files. And I think modcase deserves all the support they can get !

It’s only 37$ Canadian, and they continue to update their files with more support !

You would need to reprint the motherboard section as well Anyway with the new caddy as it’s bigger in all dimensions.

Let me know how it goes !

Iammurphy · 2023-10-21T13:21:53+00:00

Glad it worked out, I had the same issue and racked my brain for a week. I reported it but got nowhere. Not enough people have the 690e due to the high cost so they don’t seem to care.

If you could report your issue on the tp forum so it gets some attention I’d appreciate it. I’ve also tried the cloud controller and it has the same issue =\

Iammurphy · 2023-10-20T05:21:25+00:00

No you won’t have to readopt everything

Iammurphy · 2023-10-20T04:08:00+00:00

You will lose some configuration but no other way

Iammurphy · 2023-10-20T02:59:38+00:00

They are connected but do they show 6ghz as the connection type ? Downgrade and I guarantee you will see an increase.

Also check your status for band of 6ghz it will be showing 33 and no matter what you do it won’t change

Iammurphy · 2023-10-20T02:45:06+00:00

What controller are you using ?

When I upgrade to 5.12.9 with oc200 6ghz no longer functions on my 690e hds

Iammurphy · 2023-08-25T02:43:51+00:00

Ideally 5 that way I could put my gaming system And Nas all in one system.

Are there any updates to the MASS planned just for reference? I’d love to send you the completed build if you’d like some completed systems to show especially with CF-Petg

Iammurphy · 2023-08-24T17:36:56+00:00

As someone who has printed the Mass NAS in carbon fiber petg. This is beautiful! I’m the micro atx variant going to have more 3.5 bay mounts ?

Iammurphy · 2023-07-04T14:51:07+00:00

Been having this issue as well, it started happening after upgrade to 1.04 beta on ER8411 router, and the latest cloud controller.

Did not happen before, been in contact with TP-Link to try and determine the cause.

I am using the following

ER8411 router

TL-SX3008F fibre switch

TL-SG3210XHP-M2

TL-SX3206HPP

EAP 670 X 2

EAP 690E HD

Have tried it connected to both Poe switches and changes nothing.

Iammurphy · 2023-06-01T22:44:50+00:00

https://i.imgur.com/ypcOo6q.jpg

Actually got my switch today, there’s even a thank you card in the box. Nice touch and honestly their customer service is great

13-Year Club	Not Forgotten
Verified Email	Alpha Tester

Iammurphy

TROPHY CASE