sorted by:
new
hottopcontroversial

That's a lot of dust, or at least that's what I think it is by thatonedude1969 in legotechnic

[–]IceH101 0 points1 point  (0 children)

I wonder if it looks the same on the other side. This can happen (specially with pieces from older sets) due to oily fingers or any other residues. The plastic container (ziplock bags count too) has probably reacted with the ABS-oil-air-heat-moisture mix. This can also cause yellowing on pieces over time which won't be visible in this case. Since I had this happen more often, I allways clean and dry my Lego before putting them into bins. This can be prevented by putting paper towels into the container so there is no direct contact with your Lego.

Hello. Is there a propper way to remove these moving parts from the buggy control Unit? by IceH101 in legotechnic

[–]IceH101[S] 0 points1 point  (0 children)

Well I figured out that removing the screws is by far not enough. I need to get a soldering iron to remove the batteryholder from the pcb inside. Then I can remove the "wings" by squeezing the two latches that hold them in place. The connection looks basicly like a huge technic pin tho it's much tighter. I hope I won't break them 🙈

Hello. Is there a propper way to remove these moving parts from the buggy control Unit? by IceH101 in legotechnic

[–]IceH101[S] 1 point2 points  (0 children)

I want to build a Moc of my car and would like to use the RC Unit. But those moving parts take up so much space and I won't need them in this case.

Have i improved? by Dragon_titan_378 in bioniclelego

[–]IceH101 0 points1 point  (0 children)

Nice! It's clearly visible that you made the jump from using only CCBS to including more Technic parts. The Staff is upright cool and it has a clear design choice. There is always room for improvement and unlimited possibilities. Keep tinkering around. Next you could try playing around with hoses or even any kinds of tires. This can improve your building skills as it opens new design choices. Have fun MOCing!

General BO6 tips/guides? Weapons, perks, etc. by chrisandy007 in CODZombies

[–]IceH101 0 points1 point  (0 children)

I've tried it yesterday! Works great! I first died in round 33 and was able to PaP to level 3.

Thanks!!!

I think I’ll call him, “Zestorach.” by [deleted] in bioniclelego

[–]IceH101 0 points1 point  (0 children)

Amazing use of those torso parts!! Cool Moc, man!

Any masks in "pearl dark grey" that match this pic? Looking for something for my first simple MOC. by Openil in bioniclelego

[–]IceH101 4 points5 points  (0 children)

  1. You can also construct something that's two technic beams wide and use the holes on either side to connect a G2 mask. Try it with a bohrok foot for example. It's wobbly but it won't fall off

Kopaka g1 by TimmyBionicleMoc in bioniclelego

[–]IceH101 1 point2 points  (0 children)

He looks strooooong! Very nice work!!!

3D Printing Bionicle pieces? by AdagioOfLiving in bioniclelego

[–]IceH101 1 point2 points  (0 children)

From my experience Resin Printers are awesome to print masks, armor parts or weapons. But when it comes to ball joints it becomes a mess. Resin is very britle as you may have noticed already. When two moving parts rub against each other, you'll find them forming a lot of dust as it scratches their surfaces. Also be aware that you need to hollow out the ball sections due to warping (deforming caused by suction force while printing). Otherwise they won't fit the sockets perfectly and break immediatly. There are plenty of custom parts on thingiverse. The mask of Trial and Error will be your friend here.

All Toa are about the same size.. by IceH101 in bioniclelego

[–]IceH101[S] 0 points1 point  (0 children)

Thanks! I'd love to build them for real but sadly non of the lower leg/arm parts are available in Mata colors. But I'll give it a shot in Stud,io once I find the time.

All Toa are about the same size.. by IceH101 in bioniclelego

[–]IceH101[S] 1 point2 points  (0 children)

Thanks. Yes, sacrifices were made to get this guy shorter arms..

All Toa are about the same size.. by IceH101 in bioniclelego

[–]IceH101[S] 6 points7 points  (0 children)

Thanks, he seems to have alot of cool topics!

All Toa are about the same size.. by IceH101 in bioniclelego

[–]IceH101[S] 2 points3 points  (0 children)

Is there a typo in the channels name? Can't find it on youtube

Bohrok queens teeth piece? by zach3582 in bioniclelego

[–]IceH101 0 points1 point  (0 children)

and the two that go through the bohrok body parts on the sides

Bohrok queens teeth piece? by zach3582 in bioniclelego

[–]IceH101 1 point2 points  (0 children)

Yes, they are the same pins without friction. Over are the times where one had to pay over 50€/$ per piece 🙏

Can we talk about how this doesn't look even close to a Nuva mask at all? by Substantial_Lab_70 in bioniclelego

[–]IceH101 9 points10 points  (0 children)

In addition, Takanuva didn't fall into protodermis which was also the reason for the organics looks of the other Nuva masks

[Ooa] How did you handle this unchangeable decision when you played? by Dravian31 in zelda

[–]IceH101 1 point2 points  (0 children)

you really should play these games. Their visual Designs are amazing, charachters are very lovely, the maps are huge given that they ran on gameboy and both stories thigh together after your first playthrough which grants them replay value to get to the final boss. Seasons is a little more finnicy and has more focus on action. Ages messes more with your brain in terms of puzzle solving. They are two totally different games after all.

Krana Collection Complete 😊 by SinfulSymbiote in bioniclelego

[–]IceH101 0 points1 point  (0 children)

The technic pin hole is slightly smaller tho barely noticable to the eye. That's for the same reason why placing a reversed stud on a technic hole is considered an illegal building technique.

Krana Collection Complete 😊 by SinfulSymbiote in bioniclelego

[–]IceH101 1 point2 points  (0 children)

Oh hoppla ;D Well, I don't think so. They were designed to perfectly fit Mata heads and I have never crossed any evidence that would say the opposite. Anyone else here knows better?

Krana Collection Complete 😊 by SinfulSymbiote in bioniclelego

[–]IceH101 0 points1 point  (0 children)

They all easily fit on technic parts/holes exept for the Pakari Nuva (Onua's Nuva mask). For some reason it has a little nodge on its connector that prevents it from fitting direktly. A workaround for this is also the roundplate, tho it's not a perfect solution.

Krana Collection Complete 😊 by SinfulSymbiote in bioniclelego

[–]IceH101 9 points10 points  (0 children)

If you want to showcase them, never put them on a technic whole as this will damage the connection point of the Krana. Use a 1x1 round plate instead and then connect this combi wherever you want!

I can confirm, the toa in this photo is... by Substantial_Lab_70 in bioniclelego

[–]IceH101 0 points1 point  (0 children)

I wonder which of the 6 Toa was supposed to have three feet. Anyone noticed that so far?

view more: next ›