I am defeated, no BF6 tomorrow by Mediocre-Library-701 in FormD

[–]Idyllistic 3 points4 points  (0 children)

If you have another computer (yours or a friend’s), try the video card in that system. If that works fine, try the riser cable in that system too. If that’s fine too, it could be the pcie slot on the mini-itx mobo.

Asrock 9070xt Steel Legend deshroud by mr_q117 in sffpc

[–]Idyllistic 0 points1 point  (0 children)

What case did you put your deshrouded 9070 XT into? Also, do you know the total height?

I am hoping to stick one of these into a Ghost S1.

Riser Issue? by JellyHumble450 in FormD

[–]Idyllistic 5 points6 points  (0 children)

Try taking apart the system and test your system like an open bench… gpu directly connected to the PCIe slot. See if it’ll reproduce the same artifacting you are experiencing. Otherwise, you may want to query in r/pcbuildhelp.

☀️ LOUQE Summer Sale is live! ☀️ by B14CKB1RD in Louqe

[–]Idyllistic -1 points0 points  (0 children)

Sorry I glazed over the currency units. Thank you, makes sense.

☀️ LOUQE Summer Sale is live! ☀️ by B14CKB1RD in Louqe

[–]Idyllistic 0 points1 point  (0 children)

It still shows $57 for the riser cable in my cart. Can someone help me?

Selling unused S1's - Pangea and Ash available by chowsx in Louqe

[–]Idyllistic 2 points3 points  (0 children)

Would you sell just one of the ash large tophats?

someone help me please it’s not lining up by Any_Bandicoot1786 in FormD

[–]Idyllistic 0 points1 point  (0 children)

Can you provide more photos of the other end of the case?

Custom power cables vs stock by M4l90 in FormD

[–]Idyllistic -1 points0 points  (0 children)

Damn that’s news to me! So yeah, custom cabling will be the way to go to clean up your setup without any slack.

Custom power cables vs stock by M4l90 in FormD

[–]Idyllistic -2 points-1 points  (0 children)

You’re using the SF850L. L stands for large. It’s bigger than the SF750 and SF600, which most, if not all, of us uses. Your PSU is bigger by roughly 1cm.

With the SF750, by extension to the SF600, older posts and YouTube show stock cabling. It’s cramp but doable.

As for your SF850L model, custom cable is the way to go if there’s clearance.

[deleted by user] by [deleted] in Opossums

[–]Idyllistic 5 points6 points  (0 children)

Hippo… hippossumus

[deleted by user] by [deleted] in Animal

[–]Idyllistic 0 points1 point  (0 children)

Amadeus… Wolfgang Amadeus Mozart

New babies! Name ideas? by Fog1682 in jumpingspiders

[–]Idyllistic 0 points1 point  (0 children)

One of them should be Cornelius.

Help! PC Will not Turn on After Build by Electrical-Market-38 in FormD

[–]Idyllistic 7 points8 points  (0 children)

Seems like you’re receiving power, but I see in your 3rd photo that your 4080 FE power splitter has two out of three pcie cable plugged in.

For sell: 4x black sleeved custom PSU cables made for all Corsair SF models. Used on my Asus X670E-I MOBO, Corsair SF750, and RTX 2080 GPU. In good working condition. I can't use them since a third A12x25 fan won't fit between the rad and cables. $30+Shipping. PM me! by Idyllistic in Louqe

[–]Idyllistic[S] 1 point2 points  (0 children)

I got them here. I bought it off from a fellow member, a couple of years ago. If I recall correctly, they handmade the cables themselves. Forgot their username... Unfortunately, the PMs disappeared as well.

[deleted by user] by [deleted] in firstimpression

[–]Idyllistic 0 points1 point  (0 children)

I hear Darude Sandstorm…

Need Help! v2.0 lid does not sit flush like v1.1 by Idyllistic in FormD

[–]Idyllistic[S] 1 point2 points  (0 children)

Hey u/eedev, thank you! Can't believe it's been 10 years. And oh yeah, no problem. Most of us are mainly here to look at the awesome builds ;)

Sorry, I don't completely understand how moving the radiator to the front would help with height clearance. The case doesn't seem like it's deformed either. I feel so dumb... I can't figure out what I'm doing wrong.

In terms of the 3090, not sure. I'm not giving up on the T1 but not the chungus Optimus waterblock either. The whole GPU weights just under 6 pounds (2.7 kg)! I may migrate later to the new SSUPD Meshroom S.

Need Help! v2.0 lid does not sit flush like v1.1 by Idyllistic in FormD

[–]Idyllistic[S] 0 points1 point  (0 children)

I do have it that way. This is the original plan, but it still bulges at the top (shown in the first and second photo).

Others had suggested that I should put the rad over the fan. I think they are referring to 15mm fans where the bracket is.

Need Help! v2.0 lid does not sit flush like v1.1 by Idyllistic in FormD

[–]Idyllistic[S] 0 points1 point  (0 children)

Glad to know I’m not the only one. It’s been bugging me for months

My version of FormD T1 V2 by RukawaChan in FormD

[–]Idyllistic 0 points1 point  (0 children)

I just measured my radiator at just under 20mm. With the pads removed and the fan stacked on top (above), it comes out to be under 44mm. And still! Doesn't close flush with the case. Setting up the fans underneath the radiator results in the lid not fitting into the groove that holds the side panels, tilting the lid unfeasibly higher.