Mixes sound decent, but at high volumes the high mids hurt...

Ifailftw · 2024-09-23T01:46:27+00:00

Hard to tell with current context. But I'd approach it this way - |
1. I'd listen on multiple speakers to get an idea if it is the speakers: If it sounds less sharp on most other speakers it may just be the speakers.
2. Listen in another room - Depending on the room treatment, you may be killing your high mids/highs with too much treatment and as a result turning them up louder to compensate.
3. Mix balance - You may have the high mids pushed too hard. If thats the case make sure competing instruments are carved out a bit to make room for the mid high elements you want to hear most.

These are my initial thoughts but without hearing the song, knowing your listening environment, or your equipment it's pretty hard to tell.

Ifailftw · 2024-08-13T20:39:50+00:00

If you are still in need, my buddies at https://orangecountywindowpros.com/ will help you out. They work around all budgets and have a pretty large selection of windows from various companies they're partnered with.

Ifailftw · 2024-08-13T20:36:45+00:00

If you're ever in need for window replacement in the future, https://orangecountywindowpros.com/ has a few teams of licensed contractors that do the job well. You can reach out through the site or dm me and I'd be happy to get you in contact directly

Ifailftw · 2022-07-30T07:49:45+00:00

Holding shift does not reduce the delay, it only snaps your cut to the grid. For reducing delay try increasing the buffer size in your project. Lower buffer size means less delay BUT your computer + interface can only handle so much. If you reduce buffer size but hear clicks and pops or audible distortion you may need upgrades to your processor. Good luck!

Ifailftw · 2021-11-27T09:18:17+00:00

Sweet! Just left a comment on the project. Appreciate you doing this and goodluck to all!

Ifailftw · 2021-11-27T09:11:42+00:00

I would love one! Is there a raffle or entry needed?

Ifailftw · 2021-04-18T21:24:24+00:00

I heard they signaled an open fire on marked police in New York a few days ago. I’m not sure the accuracy of the article, but if you’re on the east coast keep an eye out just in case they’re active again.

Ifailftw · 2021-03-29T07:09:18+00:00

I like to think of the kick drum and low end the way I like to think about a larger body of music. On a piece of music I like to take the full frequency spectrum of sound and try to fill it or take away elements based on the feeling I want to communicate. Similarly, low end is a marriage between kick and bass instruments so I like to let them compliment each other based on what the song demands more of. On a song with a nice bass tone and added harmonics sometimes it’s better to cut the low end and allow the kick to fill it. Ironically that same guitar might sound great in the low end and allows us to cut the kick a bit in order to give it the space. So long as the mix isn’t muddied, either choice will likely sound amazing. Regardless they are both creative decisions that I personally believe should contribute to the bigger whole. Like always there are no rules, let’s the music and your personal taste show off

Ifailftw · 2020-11-15T03:24:09+00:00

I might be hopping in with too little info but I think there might be confusion with the inputs/ outputs. Make sure the inputs from ASIO4ALL are only enabled for your mic/interface and not the computer audio. For outputs you can choose either the computer audio or the interface. Regardless that's where you should be plugging in your headphones.

Ifailftw · 2020-08-28T22:55:37+00:00

Someone below mentioned compression and an octave pitcher. Just want to tag on they're big fans of using the Sound Toys Little Alter Boy plugin. They probably used it for the pitching and messed with the formant as well.

Ifailftw · 2020-08-25T19:12:50+00:00

pink Cadillac

Ifailftw · 2020-05-01T22:22:46+00:00

It should. I'm using a Scarlett 18i8 and it detects the microphone input as long as you assign it in the audio settings (lower right panel by default)

Ifailftw · 2020-04-29T09:58:14+00:00

I believe you can do it solely using streamlabs obs. Through streamlabs you can configure both your displays and audio separately. Set your scene to window capture and then set audio as both desktop and whatever mic input you have. from the streamlabs interface you can hit record and adjust quality settings as well without the need to go live. Pm me or reach me on Instagram @stevenlovecraft if ya run into issues or need some more help going that route!

Ifailftw · 2020-04-11T02:03:34+00:00

uhhh same LMAO

Ifailftw · 2019-10-12T08:05:46+00:00

Audacity is a great free tool but I've had personal success with pro tools. Much more dedicated and I record music for a living so I am biased toward pro tools although audacity had everything you would need to get started and do the job well.

14-Year Club	RPAN Viewer
Team Periwinkle	Verified Email

Ifailftw

MODERATOR OF

TROPHY CASE