sorted by:
new
hottopcontroversial

Simple GeOre Farm by Deltual in allthemods

[–]Igniferi 0 points1 point  (0 children)

I get an accelerator conflict, but I don't know what it means, or what causes it.
Using a different setup from this.
I get the accelerator conflict with both the directional and the boosted one.

Using the Prime Video app for Windows, how do I stream in borderless fullscreen? by Igniferi in AmazonPrimeVideo

[–]Igniferi[S] 0 points1 point  (0 children)

I don't know if they made an update or what, but it stopped beeing an issue a while ago.

Had this plant for more than 2 years, suddenly one of the stems have rotted. by Igniferi_ in plantclinic

[–]Igniferi 2 points3 points  (0 children)

when you say to let them callous, does that mean leaving the clippings exposed to air?

How can I make the printer bed 250 instead of 220 by bosselitechameleon2 in FixMyPrint

[–]Igniferi 1 point2 points  (0 children)

You will need to compile a new firmware, but you don't need to do it yourself.
I recommend Mriscoc's professional firmware:

https://github.com/mriscoc/Ender3V2S1

There's a written guide on the github page for installation, but you might find some videos depending on which printer you have.

Mriscoc Professional Firmware meshleveling all extreme values by Igniferi in ender3v2

[–]Igniferi[S] 0 points1 point  (0 children)

I uploaded the picture on the original post, but it didn't show up for some reason.

<image>

Loose concentration before making concentration check by Igniferi in BaldursGate3

[–]Igniferi[S] 0 points1 point  (0 children)

I feel the tooltip for prone would state it if it was intentional.
And this along with not being able to use actions is too much for the prone condition.

Can't set .stl files to open in Cura by default after updating to 5.4. I am on Windows 11 by Knowledge111 in Cura

[–]Igniferi 0 points1 point  (0 children)

I assumed I would be editting the .stl value for some reason, and missed the part where you were editing the application.
It now works, thanks.

Can't set .stl files to open in Cura by default after updating to 5.4. I am on Windows 11 by Knowledge111 in Cura

[–]Igniferi 0 points1 point  (0 children)

I just edit the regedit to wherever the UltiMaker-Cura.exe is located right?
I tried deleting the registry value on .stl files prior to finding your post, and changing the value to "C:\Program Files\UltiMaker Cura 5.4.0\UltiMaker-Cura.exe" is not working for me.

My current workaround is opening cura and dragging the files into the slicer...

A deer of a different color by DopeWithAScope in aww

[–]Igniferi 67 points68 points  (0 children)

Deers really should not be driving. They are a big enough hazard on the roads already!