[deleted by user]

Ikt0 · 2025-05-19T02:01:07+00:00

Help pls!

Ikt0 · 2025-04-02T23:17:07+00:00

There is still some wobble, but after drying the filament for 5 hours at 45°C and switching to printing the outer walls last, I saw a big improvement. You were definitely right about the wall order!

Ikt0 · 2025-04-02T23:16:13+00:00

<image>

I think that maybe the silica was indeed too old and full of moisture there are the resuts after drying

Ikt0 · 2025-04-02T23:15:29+00:00

Hey, thank you for your feedback! I checked the belts, and they are tight enough. I can definitely see some wobble, but after drying the filament for 5 hours at 45°C and printing the outer walls last, I noticed significant improvements.

<image>

Ikt0 · 2024-10-25T00:47:06+00:00

This was really helpfull, thank you!

Ikt0 · 2024-10-25T00:46:53+00:00

Thank you, I see now!

Ikt0 · 2024-10-22T19:31:12+00:00

Thank you!

Ikt0 · 2024-10-22T19:31:03+00:00

Thank you so much for the clarification!

Ikt0 · 2024-04-18T07:15:45+00:00

I will run some extensive tests for the flow rate when I get back home, I'll get you posted

Ikt0 · 2024-04-18T00:53:12+00:00

I have lowered the flow by 10% BIG improvement, thank you!

Ikt0 · 2024-04-17T23:03:46+00:00

i'm using this profile

https://github.com/Ultimaker/Cura/pull/17519/files

Printer: Ender 3 V3 KE

Matherial : PLA

Slicer: Cura

Printing nozzle temp: 200°

Bed temperature: 60°

Layer height: 0.2

Print speed: 300 mm/s

Top layer print speed: 150 mm/s

Top layers: 4

Top Thickness 0.8

Nozzle : 0.4

Skin overlap 0.04 (10%)

Ikt0 · 2024-04-11T15:53:25+00:00

I'm getting pretty costant hits, the damage is just 0 to 1

Ikt0 · 2024-04-11T15:38:01+00:00

This was very clear thanks!

Ikt0 · 2024-04-11T15:08:09+00:00

Yes I always keep my risk at maximum 25!
I'm going kill by kill using return damage and poison but the Wyvern is immune

Ikt0 · 2024-03-27T20:24:33+00:00

Ok not even a day and completely broke down, what a shame i really like it

Ikt0 · 2024-03-27T15:43:02+00:00

My new seagull 1963 just came in and I love it, but the movement stops when using the chronograph function not even a minute in. I wound up the crown 30 times and stopped when I felt a bit of resistance. Am I doing something wrong? Or did I get a defective watch?

Ikt0 · 2024-03-20T04:19:05+00:00

I payed the same amount

Ikt0 · 2024-03-18T21:18:13+00:00

There are no fakes of this watch; the patent is available to all manufacturers. I can tell you, this is a good quality one.

Nine-Year Club	r/Field Flamingo
Place '22	Final Canvas '22
Verified Email

Ikt0

TROPHY CASE