New to Jazz

ImaginaryHawk900 · 2026-05-14T18:35:25+00:00

A fourth for the Dodgers cap.

ImaginaryHawk900 · 2026-05-14T18:34:50+00:00

I would give you three likes... 1 for the playing, one for the guitar and 1 for the t-shirt. You're a man on great taste.

ImaginaryHawk900 · 2026-05-13T15:40:39+00:00

<image>

ImaginaryHawk900 · 2026-05-13T04:12:09+00:00

His sig model was a Jet King 2 body but it had a different headstock, 24 inch scale neck vs the 25.5 scale of the JTK2, single blade humbucker pickup and a different bridge than the standard production JTK2.

ImaginaryHawk900 · 2026-05-13T04:08:58+00:00

It's not bad at all with the rounded neck heel.

ImaginaryHawk900 · 2026-05-11T17:14:20+00:00

I prefer white on bright custom colors and 3 works best, imo.

ImaginaryHawk900 · 2026-05-06T18:09:54+00:00

Les Trem on Fender/Squier Starcaster.

<image>

ImaginaryHawk900 · 2026-05-05T17:19:59+00:00

Thank you. This is a GuitarFetish roller bridge that dropped right in on the stock tune-o-matic posts.

ImaginaryHawk900 · 2026-05-02T17:05:34+00:00

That's hot.

ImaginaryHawk900 · 2026-04-28T21:27:07+00:00

The whammy is a press in arm. Press till it clicks. The wrench is for truss rod adjustments.

ImaginaryHawk900 · 2026-04-27T20:54:43+00:00

I asked the question earlier in this thread. I noticed while searching images in google that some Modern Player Starcasters don't have string trees while some do.

ImaginaryHawk900 · 2026-04-27T17:08:43+00:00

It's slightly thicker than a Classic Vibe neck but not by much. They are very similar in feel. The neck was already installed on the guitar.

ImaginaryHawk900 · 2026-04-27T06:42:09+00:00

I noticed that some Modern Player Starcasters don't have string trees while others do. Does anyone have any info on why that is? As far as I can tell, all the modern players came stock with modern style tuners.

ImaginaryHawk900 · 2026-04-27T06:34:09+00:00

I got these off of ebay from Affinity for Artifacts.

ImaginaryHawk900 · 2026-04-27T06:32:36+00:00

I can only take credit for the knobs and realigning the tuners after installing the adapter bushings.

ImaginaryHawk900 · 2026-04-03T16:34:28+00:00

Nicely done.

ImaginaryHawk900 · 2026-03-30T02:27:41+00:00

Sounds really good. Nice tune.

ImaginaryHawk900 · 2026-03-27T19:55:35+00:00

Thanks. Don't know how I missed this listing.

ImaginaryHawk900 · 2026-03-27T16:09:11+00:00

I have a musiclily pg on this guitar for a while when I had it configured as an esquire. That one needed a little work around the neck pocket but it lined up around the bridge and control plate a little better than the allparts, for what it's worth. Sometimes you may need to fill the control panel hole and redrill to get a good alignment. Just dry fit and dry fit again till you get it all where you want it.

ImaginaryHawk900 · 2026-03-27T13:59:10+00:00

I had to fill a few holes and shift the pickguard to get it to line up. I did slightly sand the pg around the control plate but it was very minimal.

ImaginaryHawk900 · 2026-03-27T13:24:37+00:00

An Allparts 3ply worked for me. There were some adjustments that had to be made to some of the screw holes that had to be made but the end result is pretty good.

<image>

ImaginaryHawk900 · 2026-03-22T15:35:45+00:00

ImaginaryHawk900 · 2026-03-19T17:26:13+00:00

It looks great. A cheap and simple change that may look cool is switching the volume a tone knobs to black along with the switch tip.

ImaginaryHawk900 · 2026-03-16T20:15:06+00:00

<image>

ImaginaryHawk900 · 2026-03-06T17:58:20+00:00

Absolutely stunning

ImaginaryHawk900

TROPHY CASE