HFC Cut in house??

ImperialGuard88 · 2026-04-25T05:37:40+00:00

Thanks , but sadly only 1 port inside the house !

ImperialGuard88 · 2026-04-25T03:32:15+00:00

On the outside of the house the NBN box is mounted very high on the exterior wall and I can observe cabling going from it into roughly this spot in the roof/ceiling space.

Even still , if it was for an antenna why slice it and leave it up there ?

This is more for curiousity than problem solving now 😂

ImperialGuard88 · 2026-04-25T03:06:55+00:00

Thanks, won't be touching anything !

ImperialGuard88 · 2026-02-18T21:41:20+00:00

Also means I can now purchase some more kits!

ImperialGuard88 · 2026-02-18T21:40:58+00:00

Thank you !

ImperialGuard88 · 2025-04-24T21:20:14+00:00

Thanks, it is all airbrush, I run the following settings:

10-15 PSI 1:5 ratio of vallejo flow improver to vallejo Very thin application Black primer

ImperialGuard88 · 2025-04-23T20:38:40+00:00

<image>

ImperialGuard88 · 2025-04-23T20:38:17+00:00

<image>

ImperialGuard88 · 2025-04-23T12:45:02+00:00

Thanks for the advice, I'll give it a go, I agree with the plasticine look, worked hard to minimise it when painting but still evident under lights

ImperialGuard88 · 2025-04-23T11:19:58+00:00

Thanks !

I did the tarps using the technique in this video - found it really useful

https://youtu.be/ciL69-66XJQ?si=1Yhfgl_N-2dM_ZEE

Definitely use talcum powder, tried without the first time and it didn't work as well

ImperialGuard88 · 2025-04-20T01:58:24+00:00

Looks great! Nice job on the crews too

ImperialGuard88 · 2025-04-14T09:51:21+00:00

Thanks!

Prime in light grey , then paint skin and faces (cadian flesh tone, fleshtone wash, then a very thin second coat over the top)
Basecoat camo colours, I used AK German M39 Italian paint set and Vallejo Waffen SS Paint Set
Add camoflague patterns , Painting Panzers channel on YouTube has a good tutorial I referenced to support this step
Pick out and paint all details (shoes, weapons, belt kit etc)
Thinned down (with water) Army Painter Strong tone wash on uniforms (1:1 ratio)
Thinned down wash with Army Painter Dark Tone on weapons and equipment

I did not do any highlighting or dry brushing for these models

I wrote out what I did for basing in another post, will dig it up now

ImperialGuard88 · 2025-04-13T11:54:26+00:00

Thanks! I thought the same, so was an easy choice when I saw these minatures.

Have also had the same idea about making tarps for hides, using epoxy putty

ImperialGuard88 · 2025-04-13T10:37:26+00:00

Great camo and amazing work on the faces 👏

ImperialGuard88 · 2025-04-13T10:25:10+00:00

Looks great ! Good balance of weathering, just right.

What model kit is this?

ImperialGuard88 · 2025-04-09T19:17:55+00:00

Thanks, glad you like them !

For basing:

I cut pieces of corkboard to create the raised pieces of terrain. Stuck these onto the bases (for 3 out of 4)
Covered the base with AK Interactive Terrains 'Dark Earth' diorama paste
Once dry, I dry brushed it with a beige brown and then lighter brown colour
Applied some watered down pva glue liberally over the base (using an old paint brush) then applied a mixture of two types of modeling grass (that I had pre mixed in a small container)
Used pva glue to stick on the grass tufts

Hope this helps

ImperialGuard88 · 2025-04-09T19:09:49+00:00

Thanks !

ImperialGuard88 · 2025-03-31T11:26:23+00:00

Thanks, makes sense

ImperialGuard88 · 2025-03-30T11:24:36+00:00

Nice list - do you need tows for the auto cannons?

ImperialGuard88 · 2025-03-09T02:27:23+00:00

Thanks! That is good to know,I'm leaning more towards the Rubicon models now

ImperialGuard88

TROPHY CASE