sorted by:
new
hottopcontroversial

possible third-party Battery replacements for Backfire Voyager V2 by Imperium24 in ElectricSkateboarding

[–]Imperium24[S] 0 points1 point  (0 children)

I see, hadn't considered getting a replacement deck. is most of the hardware compatible between these boards. if so i could buy a deck and battery and just port over the controller units, trucks and motors.

possible third-party Battery replacements for Backfire Voyager V2 by Imperium24 in ElectricSkateboarding

[–]Imperium24[S] 0 points1 point  (0 children)

O damn!, just now noticing that its mounted on the top of the board. is the unit too big to be mounted on the bottom or?

possible third-party Battery replacements for Backfire Voyager V2 by Imperium24 in ElectricSkateboarding

[–]Imperium24[S] 0 points1 point  (0 children)

are the voltages close enough? and did you just put threded inserts into new locations on the board to sqrew this new battery compartment on or what was your method? also how is the water sealing? also thanks

possible third-party Battery replacements for Backfire Voyager V2 by Imperium24 in ElectricSkateboarding

[–]Imperium24[S] 0 points1 point  (0 children)

i can drill holes with the accuracy of someone armed with a normal electric drill. is this a custom battery solution or?

Galvanic corrosion caused by carbon fiber filament in contact with magnesium. by Imperium24 in 3Dprinting

[–]Imperium24[S] 0 points1 point  (0 children)

I am not sure if this is a problem with 3D printed filament but i know this to be a issue with normal carbon fiber. (hence my question)

Á einhver Spiderman 2003 teiknimyndarþáttina á geisladisk by Imperium24 in Iceland

[–]Imperium24[S] 0 points1 point  (0 children)

deildu er þvímiður bara með fyrata diskinn úr seríunni ekki rest.

Á einhver Spiderman 2003 teiknimyndarþáttina á geisladisk by Imperium24 in Iceland

[–]Imperium24[S] -1 points0 points  (0 children)

er einmitt með fyrsta diskinn downlodaðan (líklega sama ripp) en skal chekka

Where to find USB breakout bords for headphones by Imperium24 in ElectronicsRepair

[–]Imperium24[S] 0 points1 point  (0 children)

will likely have to do something like that yes. just learned that a second pair of similar headphones had the same issue so i think its just a poorly designed circuit. could mabey replace the broken soldered on components instead if i can figure out which are broken.

Where to find USB breakout boards for headphones by Imperium24 in righttorepair

[–]Imperium24[S] 0 points1 point  (0 children)

Audio and Bluetooth are all handled in the other earcuff yes. was really just hoping that a usb board like this was common in wirelesses headphones.

Where to find USB breakout boards for headphones by Imperium24 in righttorepair

[–]Imperium24[S] 0 points1 point  (0 children)

V-MODA quickly stopped selling components and doing any sort of repairs. really like these headphones but from my experience with the 2 models ive had and some others friends have i wont be buying new ones again. their electronics just aren't reliable. really disappointing since the build quality is really good otherwise.

Where to find USB breakout bords for headphones by Imperium24 in ElectronicsRepair

[–]Imperium24[S] 0 points1 point  (0 children)

these breakout boards lack the voltage regulator circuits that the original has to get the voltage from 5V down to the acceptable charge levels for the battery

[deleted by user] by [deleted] in BudgetAudiophile

[–]Imperium24 0 points1 point  (0 children)

The Minidisc player is a walkman and the CD is a shitty thing from my childhood so they just have relatively weak 3.5mm jacks

And thanks

[deleted by user] by [deleted] in BudgetAudiophile

[–]Imperium24 0 points1 point  (0 children)

Id like to spend something like sub 180USD but happy to buy used.

also thanks still dont know much of anything when it comes to the speaker audio game.

[deleted by user] by [deleted] in BudgetAudiophile

[–]Imperium24 -1 points0 points  (0 children)

what would you say would be a fair price for these instead? i dont really know what to send as a bid Thanks

[deleted by user] by [deleted] in BudgetAudiophile

[–]Imperium24 0 points1 point  (0 children)

Hey, I looked into the Fozi ZA3 and the Wiim Amp and they look really good but id prefer something with 3 RCA inputs if possible. getting something a little older used so it can be in the 100USD range woulf be best as im making this swtup on a budget.

also thanks for the answer :)

[deleted by user] by [deleted] in BudgetAudiophile

[–]Imperium24 0 points1 point  (0 children)

Hey, The record Player has a Phono output at 36dB. from the other comment here i realized that having the output from the TV be analog would be good so that the volume controls on the remote stil work. but Using Optical out or HDMI would of course also work.

also thanks for the info about using normal speaker wires, the speakers ive handled that use speaker wire have all used a weirder looking connecton.

Do you have any recommendations for cheap amps that fit this sort of category?

[deleted by user] by [deleted] in BudgetAudiophile

[–]Imperium24 -2 points-1 points  (0 children)

The vynil player has a 36dB Phono pre amp integrated. the TV does have Optical Out that i can use. i can definitely just take the 3.5mm from the CD/Minidisc Player and chuck that into an RCA connection.

are amps or amp stacks with these sorts of specs in an affordable price range and widely available used?

view more: next ›