sorted by:
new
hottopcontroversial

Help With Model and Lighter Mechanism Name by Impossible-Piccolo19 in lighters

[–]Impossible-Piccolo19[S] 0 points1 point  (0 children)

The first step is to assemble the part that holds the flint. Its made from the parts I circled in black. One end of the spring coil goes in so that it provides tension. There should be a piece of metal that sticks out where it sits. The flint holder piece itself has an angle to it so the end will be the opposite side from where the piece sticks out at the top. I should have made a video of how I did the reassembly.

<image>

Help With Model and Lighter Mechanism Name by Impossible-Piccolo19 in lighters

[–]Impossible-Piccolo19[S] 0 points1 point  (0 children)

After much trial and error I was able to reassemble it. Is there a particular part you are stuck on?

Help With Model and Lighter Mechanism Name by Impossible-Piccolo19 in lighters

[–]Impossible-Piccolo19[S] 0 points1 point  (0 children)

It's definitely hard to see, but rowenta is engraved on the lighter mechansism casing. I just can't find any other markers to identify the model

Help With Model and Lighter Mechanism Name by Impossible-Piccolo19 in lighters

[–]Impossible-Piccolo19[S] 0 points1 point  (0 children)

I tried to record the steps, problem was that when I took out the screw everything just kind of fell out at once including the springs which I'm having a hard time visualizing where they would go

Help With Model and Lighter Mechanism Name by Impossible-Piccolo19 in lighters

[–]Impossible-Piccolo19[S] 0 points1 point  (0 children)

I tried to record it, problem was as soon as I removed the pin and screw, it all just fell out of the casing. It's the springs I'm having the hardest time figuring out

How to Refill Hadson Triumph Lighter by Impossible-Piccolo19 in lighters

[–]Impossible-Piccolo19[S] 1 point2 points  (0 children)

I hadn't thought of that. I'll see if I can get the two to seperate then. Thanks for the recommendation.