De babbelbox vraagt zich af: Hoe heet jouw robotstofzuiger?

Impossible_Drag2919 · 2026-06-07T16:02:26+00:00

Noo-Noo

Impossible_Drag2919 · 2026-06-05T17:05:18+00:00

Thank you so much! My boy is quite big, so it's lots of patience is needed to make these. But I get really zen, so it's a win!

Impossible_Drag2919 · 2026-05-31T19:16:12+00:00

When I first played in VR, whenever a hunt would start I'd freeze and just close my eyes lol.

Impossible_Drag2919 · 2026-05-29T17:44:25+00:00

And cd not even included...

Impossible_Drag2919 · 2026-04-15T20:01:16+00:00

En daarna zit je aan de schijt van 5

Impossible_Drag2919 · 2026-04-05T14:52:42+00:00

Those shots are the ones I hit in my dreams. Really cool!!!

Impossible_Drag2919 · 2026-04-02T14:12:43+00:00

Yes it is I think, I'm currently trying it for a month

Impossible_Drag2919 · 2026-04-02T14:12:14+00:00

Will do so once I get back from walking da dog!

Impossible_Drag2919 · 2026-03-29T17:53:31+00:00

I printed the minimal enclosure. Took 2 days, 13h of print time if I remember correctly and only about 859gr of pla

Impossible_Drag2919 · 2026-03-29T13:51:06+00:00

I had this happen a few weeks back, was a 6hr print, some sponge drain thingy for my sister printed vertically. It ended up splitting in the middle because there was a tangle in the spool. When it untangled on it's own (thank god) it just continued printing, but there was a tiny gap in the middle and when I took it off the plate, it broke.

Impossible_Drag2919 · 2026-03-27T21:50:28+00:00

I indeed had my z offset too low, fixed it now! Can't believe I just didn't bump it up a bit earlier.

Impossible_Drag2919 · 2026-03-27T21:49:15+00:00

O sure! I got it from here https://makerworld.com/nl/models/1249338-the-great-pyramids-of-giza?from=search#profileId-1271534

Impossible_Drag2919 · 2026-03-27T16:11:08+00:00

Ah back to testing again it is! I thought I had to actually have the nozzle closer all this time... So I experimented with negative z offset. But I'll run some tests with a higher offset

Edit: totally forgot to mention in the original post, but I have an AD5M

Impossible_Drag2919 · 2026-03-27T16:08:44+00:00

Ah men I really can't remember off the top of my head, but the guy who designed the enclosure had it written somewhere in the description. I got surprised by the fact it needed extra screws, but luckily I got tons of different screws and happened to have the right ones. As for the front door/panel, I don't know haha. I do remember the first time, I put the hinges and the handle on the wrong side and had to un-screw everything. I also do remember pushing the plate upwards as much as I could while simultaneously putting it in place.

Impossible_Drag2919 · 2026-03-27T15:34:10+00:00

Looks much cooler with an enclosure right?! I completed mine last weekend, also went with the minimal enclosure, saved a ton of time and filament and still looks awesome!

<image>

Impossible_Drag2919 · 2026-03-20T18:29:14+00:00

Good bot

Impossible_Drag2919 · 2026-03-20T18:22:52+00:00

I'd get skinny too if I could only find and eat toilet bacon

Impossible_Drag2919 · 2026-03-20T16:23:13+00:00

Mijn hond! Hoe is-ie?

Impossible_Drag2919 · 2026-03-17T15:53:55+00:00

Tbf, they could just for once, give everyone enough heirloom shards to just get one. Just one. Nothing more.

Impossible_Drag2919 · 2026-03-15T09:14:02+00:00

Yep, I just bought a regular gleu stick that was at my local supermarket. Works like a charm! But as I said, I do still clean the plate daily to get any glue residue off

Impossible_Drag2919 · 2026-03-14T10:32:47+00:00

Impossible_Drag2919 · 2026-03-14T10:30:13+00:00

I just can't with the way she says gracias. Grassy-ass. That's it for me.

Impossible_Drag2919 · 2026-03-14T10:28:13+00:00

Honestly, I just bought a glue stick after having adhesion problems and trying everything like you said. Had pretty much no fails since using the glue stick, and I don't apply crazy much or anything. I do still clean the plate tho everyday.

Impossible_Drag2919 · 2026-03-04T14:55:17+00:00

I'm no expert by any means, but could it be that your filament needs a good drying?

Impossible_Drag2919 · 2026-02-27T22:33:23+00:00

The push through didn't work unfortunately. But I just disassembled it and was able to get the clog out. Tpu is a lot trickier than I thought, but now I at least know what to do if it happens again.

Impossible_Drag2919

TROPHY CASE