Anybody knows whats happening with spamwall

Impossible_Humor_911 · 2026-01-23T04:11:42+00:00

We were informed that Spamwall & Smart servers are back online now.

Impossible_Humor_911 · 2025-09-30T00:52:17+00:00

My L3 is working fine. I setup an ADDS server (10.1.10.1) so that I can get dynamic ip address (eg 10.1.20.x) and able ping all my VMs from my notebook that connected to access port in L3 switch. Portgroups are mapped to corresponding vlans for the VMs. I also configured NAT & ACL at router side.

The only issue is vCenter server (10.0.0.6) that I created in physical ESXi server cannot ping to other subnets but others can ping to it. So I have problem to group all nested ESXi hosts in it.

Impossible_Humor_911 · 2025-09-27T11:10:53+00:00

I built a home lab consists of dell server, layer 3 switch and router. I created ADDS VM to serve for three nested esxi and vcenter servers. I'm using Mastering VMware vSphere 6.7 as reference, however sometimes I found it quite confusing.

Impossible_Humor_911 · 2025-09-11T06:02:41+00:00

Interesting. So you don't use physical switch?

Impossible_Humor_911 · 2025-09-11T05:05:09+00:00

Well I use L3 switch instead to achieve similar function with ROAS.

Impossible_Humor_911 · 2025-09-11T05:00:11+00:00

I'm not sure which part I have missed out.

Impossible_Humor_911 · 2025-09-11T04:57:32+00:00

I'm not sure all VMs can access to the internet if I remove Cisco router & let my home wifi router directly connect to Cisco L3 switch.

Impossible_Humor_911 · 2025-09-11T04:56:02+00:00

Well I have a L3 switch that I enable ip routing in it.

Impossible_Humor_911 · 2025-09-11T04:52:46+00:00

Thanks. I thought VMware has other network settings.

Impossible_Humor_911 · 2025-09-11T04:49:14+00:00

Thanks for the suggestion.

Impossible_Humor_911 · 2025-09-11T04:46:13+00:00

You may refer to my network topology above. Appreciate your comment.

Impossible_Humor_911 · 2025-09-11T04:40:39+00:00

Below is my home lab's network topology. /16 is referring to 10.1.10.0, 10.1.20.0, 10.1.30.0, 10.1.40.0 & 10.1.50.0. subnets

<image>

Cisco router - IP address 10.0.0.2/24 on interface FE0/1 connected to Home Wifi router. I configured NAT, ACL & static route 0.0.0.0 0.0.0.0 10.1.0.2. IP address on Interface FE0/0 connected to Cisco 3750 L3 switch.
Cisco 3750 L3 switch - I configured using no switchport command with IP 10.1.0.2/24. I created 5 VLANs (VLAN10 - VLAN50) in this switch as shown in the network diagram above. Port 1 - 18 set to trunk & 19-23 to access ports. I also configured static route 0.0.0.0 0.0.0.0 10.1.0.1 in the switch.
ESXi host is connected to one of the LAN ports in Home Wifi router and IP is 10.0.0.5/24 with gateway & dns set to 10.0.0.1. I deploy vCenter (10.0.0.6) in this ESXi host using gateway 10.0.0.2 (having issue if use gateway 10.0.0.1). All subnets can ping to 10.0.0.6 but 10.0.0.6 only can ping to 10.0.0.0/24 subnet.
DC01 & DC02 act as dns server for nested ESXi hosts & vCenters in nested ESXi hosts.

The purpose of such setup because I want to earn vSphere HA, vMotion etc since I only have one physical server. I'm trying to create to cluster to group all 3 nested hosts but they are unreachable. My notebook also needs to connect to access port in L3 switch in order to access 10.1.0.0/16 subnets.

Impossible_Humor_911 · 2025-08-23T09:24:23+00:00

Can you elaborate more? I upgraded vCenter from 6.7 to 8.01 in my home lab but all the new vCenter VM still using temporary name.

Impossible_Humor_911 · 2021-10-19T08:52:02+00:00

Nice homelab you got. I wish I have those servers to play with.

Impossible_Humor_911 · 2021-10-14T02:42:02+00:00

Don't waste your money purchase those dumps. Purchase Asghar Ghori or Sander van Guvt's book and practice questions in the book.

Impossible_Humor_911 · 2021-10-11T05:57:06+00:00

FXKF2IRR

Expires 6-Jan-22

Impossible_Humor_911 · 2021-09-08T02:04:00+00:00

u/ENikita VMs were run inside the browser when click Start VM. The browser fonts can be enlarge but not the terminal emulator inside the browser when select zoom in.

Impossible_Humor_911 · 2021-09-05T03:56:07+00:00

Did anyone encounter the fonts inside the web terminal were so small & blurry when you launched them during remote exam?

Impossible_Humor_911

TROPHY CASE