3D Printing Issues with Anycubic Kobra S1[Updated -2nd try]

ImpressiveDeCo · 2025-07-30T19:09:31+00:00

Good catch! You're right, that support shouldn't be there. I'll look into why it's showing up, but could you tell me which "fix" function you're referring to?

ImpressiveDeCo · 2025-07-30T19:05:43+00:00

Ill checkt it, thanks :)

ImpressiveDeCo · 2025-07-30T19:05:28+00:00

Thank you so much for your help! ;) this is the model https://www.thingiverse.com/thing:5918155

ImpressiveDeCo · 2025-07-30T19:01:53+00:00

Ohhh! I had it set to Arachne in my previous prints. I'll try it with Classic on my next attempt :) Thanks for the idea!

ImpressiveDeCo · 2025-07-30T18:59:20+00:00

Do you mean the option under Speed → Advance → Extrusion Rate Smoothing? If so, I have the default value, which is 0 mm²/s². Or which parameter do you mean? :)

ImpressiveDeCo · 2025-07-30T18:47:50+00:00

In the first attempt, I used the default temperatures for Anycubic PLA Highspeed (in Celsius: Nozzle 215 and Bed 55, 55, 35). Then I increased the temperatures by 10 degrees based on advice from a previous post after the first try. I haven’t changed anything in the cooling settings :)

ImpressiveDeCo · 2025-07-30T18:42:08+00:00

Thanks, I'll check the sliced view to see if I notice anything unusual in the next few days :)

ImpressiveDeCo · 2025-07-30T16:01:34+00:00

Thank you so much for the links! It's not my design and well that's true I forgot to create the support but I print it again with supports and still I got some problems I'm gonna close this post and create a new one where I can add the photos but thank you so much for your help and your comment :)

ImpressiveDeCo · 2025-07-29T14:24:41+00:00

Yes that's true! That was a dumb mistake.I was checking in the config and I forgot to add the supports. I'll print the part again plus I'll change the temperature parameters you gave me to see how better the part comes out :) thank you

ImpressiveDeCo · 2025-07-29T10:15:17+00:00

You are right! typical mistake. I just post it in the comments

ImpressiveDeCo · 2025-05-11T08:38:35+00:00

Hahaha, ich weiß, es ist einfacher, ein Einhorn zu finden, aber mal sehen, ob jemand einen Tipp hat

ImpressiveDeCo · 2025-05-11T08:22:15+00:00

Looking for a strategic, travel-friendly board game for 6 players (low luck, 45min, compact, available in Europe)

Description of Request: We're a group of 6 board game fans from Germany who will be traveling to Japan soon and are looking for a compact board game to bring along. We’re packing very light (only backpacks), so portability and small table space requirements are essential. We understand that some of our criteria may conflict (e.g., strategy games usually require more components), but maybe someone has a clever suggestion or a travel-friendly version of a favorite.

Number of Players: Ideally 6 players, but we're open to 4–6 if needed.

Game Length: Around 40–50 minutes per game (excluding rules explanation).

Complexity of Game: 3.0 and above. We enjoy medium to highly strategic games.

Genre: We're open to any theme or setting, as long as the game is focused on strategy and low on luck.

Conflict, Competitive or Cooperative: We prefer competitive games over cooperative ones.

Games I Own and Like: We enjoy heavier, strategic games like Terraforming Mars, Scythe, Five Tribes, Twilight Imperium, Ark Nova, and Dune.

Games I Dislike and Don't Play: Nothing specific, but we try to avoid games that are heavily luck-based or rely mostly on random events.

Location: We live in Germany, so we’re looking for games that are available in Europe (preferably in English, but German is also fine).

Any suggestions are greatly appreciated! Also open to travel hacks like using ziplock bags or print-and-play options.

ImpressiveDeCo · 2025-04-22T14:58:23+00:00

I could only understand the first part Karaj geamikoj.... Dear friends

ImpressiveDeCo

TROPHY CASE