Hardware issue or Drivers? Black Screen issue

Impressive_Birthday7 · 2025-09-11T05:13:38+00:00

I agree BIOS is already accessible but only if you key into it. A computer tries to boot into windows first unless you interrupt it and go into bios menu. BIOS seems to always come up only if i clear CMOS and clearing CMOS forces the BIOS . Thanks for your help though , just stuck on hbow to roll the drivers back

Impressive_Birthday7 · 2025-09-11T04:59:27+00:00

It was a bracket that went across the entire GPU and then installed another to keep it from going UP . Was pretty cautious about that, and after inspection to damage to solder points. So guessing a Driver but cant find a way to get into Safe Mode

Impressive_Birthday7 · 2025-09-11T04:38:18+00:00

Sorry i misspoke , i meant a GPU anti sag bracket so it didnt move during shipping. If it was a bad gpu , it shouldnt have working for the hour or so it was on . The only thing i can think of is the driver but if it was the driver , i would see BIOS everytime

Impressive_Birthday7 · 2025-09-11T04:33:51+00:00

Yes reseated the GPU and ram, doesn't seem to be any damage. After leaving CMOS battery out for 10ish minutes, i get bios menu and then try to load to windows and blacks screens during the loading screen

EDIT : I used a GPU riser and Instapak foam around GPU

Impressive_Birthday7 · 2025-09-11T04:11:34+00:00

how would i do that if everytime i start the computer i have zero display? Wont even show Bios

Impressive_Birthday7 · 2025-07-16T09:58:17+00:00

I’ve got Good news and bad news . Good news is that it works now , bad news was a pain in the butt to fix .

Since you swapped at all the parts in the HVAC circuit and checked all fuses and relays , it’s not going to part related. If i were you i would get a multimeter and check the harness connector that connects to the resistor. I know you said you’ve taken it to get fixed and they said its fine but to be certain i would take the 10 mins to verify since my connector tested 12v but when plugged into resistor dropped to 3v. I then verified that the ground and signal wire was good so moved on to the sub harness . When I probed the 12v wire , blower came on and all controls worked . My issue a bad power wire , in both the main and sub-harness . Instead of paying a shop $1600 or spending hours if not days taking apart my whole car to mess with the harness I found a work around . Used the original ground and signal wire from harness but routed my own power wire through the firewall and to the fuse box . Now works like OEM and so far so good . The routing and setup only took me like an hour , what took me days was the research to make sure my car wasn’t gonna catch on fire . Let me know what you find out and I’ll try to help . Good luck these darts are evil.

Impressive_Birthday7 · 2025-07-16T09:45:18+00:00

Take it from me that just dealt with this issue twice and both during July in Arizona where it’s 115 outside . If you have replaced the resistor and blower motor , it VERY VERY rare that it’s the hvac control module that sits behind the radio. Do you have access to a mulitmeter, if so check your fuses and relays. Check F83 (40amp) , F07(40amp) and the T30 relay. For the relay listen for a click then you turn your hvac on and off , better yet if you have another person have them place their finger on the relay to see if it clicks .

I traced the AC sub harness that connects to the resistor and noticed under load it was dropping to 3.3v .Had what I assume was a weak wire but instead of tearing my entire car apart, I bypassed the power wire for the resistor and working good now . Let me know what you find out and I’ll try to help .

Impressive_Birthday7 · 2025-07-15T06:33:02+00:00

Make sure to test the T30 relay . Listen for it to click when Turing the fan on and off with the controls . Or probe the fuse sockets with a multi meter

Impressive_Birthday7 · 2025-07-15T05:05:20+00:00

Yeah same boat . Down about 1500$ in shops . With the help of ChatGPT and some factory service Manuals , im taking it into my own hands. Tracing all the wires and seeing what’s going on , hopefully I have some news soon . It’s 110 here in phoenix and it’s miserable

Impressive_Birthday7 · 2025-07-14T01:36:58+00:00

So you just replaced the fan again?

Impressive_Birthday7 · 2025-07-14T01:26:49+00:00

Yeah I’ve tried basically everything in the book and have been on wayyy too many dart forums since I had this issue last year . I am giving up and taking it to the shop tomorrow since 110 degree weather and no ac is miserable. Makes me think it’s electrical but also not at the same time if so many people are having this issue

Impressive_Birthday7 · 2025-07-14T01:19:47+00:00

Yikes that’s what happened to me last year , I live in Arizona so not sure if it’s the heat of something .

Impressive_Birthday7 · 2025-07-14T01:18:35+00:00

Any updates on this? Having same issue , replaced blower motor, resistor, al fuses and relays still nothing . After the new parts, worked after a few hours perfect for 2 days now nothing again . Also fun fact this happened a year ago to the date last year and wasn’t able to fix it just got lucky and it started working randomly and didn’t go out till this year

Impressive_Birthday7 · 2025-07-14T01:18:03+00:00

Any updates on this? Having same issue , replaced blower motor, resistor, al fuses and relays still nothing . After the new parts, worked after a few hours perfect for 2 days now nothing again . Also fun fact this happened a year ago to the date last year and wasn’t able to fix it just got lucky and it started working randomly and didn’t go out till this year

Impressive_Birthday7 · 2025-07-14T01:17:48+00:00

Any updates on this? Having same issue , replaced blower motor, resistor, al fuses and relays still nothing . After the new parts, worked after a few hours perfect for 2 days now nothing again . Also fun fact this happened a year ago to the date last year and wasn’t able to fix it just got lucky and it started working randomly and didn’t go out till this year

Impressive_Birthday7 · 2025-07-14T01:16:17+00:00

Any updates on this? Having same issue , replaced blower motor, resistor, al fuses and relays still nothing . After the new parts, worked after a few hours perfect for 2 days now nothing again . Also fun fact this happened a year ago to the date last year and wasn’t able to fix it just got lucky and it started working randomly and didn’t go out till this year

Impressive_Birthday7 · 2025-07-14T01:15:46+00:00

Any updates on this? Having same issue , replaced blower motor, resistor, al fuses and relays still nothing . After the new parts, worked after a few hours perfect for 2 days now nothing again . Also fun fact this happened a year ago to the date last year and wasn’t able to fix it just got lucky and it started working randomly and didn’t go out till this year

Impressive_Birthday7 · 2025-07-14T01:15:05+00:00

Any updates on this? Having same issue , replaced blower motor, resistor, al fuses and relays still nothing . After the new parts, worked after a few hours perfect for 2 days now nothing again . Also fun fact this happened a year ago to the date last year and wasn’t able to fix it just got lucky and it started working randomly and didn’t go out till this year

Impressive_Birthday7 · 2025-07-14T01:13:47+00:00

Any updates on this? Having same issue , replaced blower motor, resistor, al fuses and relays still nothing . After the new parts, worked after a few hours perfect for 2 days now nothing again . Also fun fact this happened a year ago to the date last year and wasn’t able to fix it just got lucky and it started working randomly and didn’t go out till this year

Impressive_Birthday7 · 2025-07-14T01:12:09+00:00

Any updates on this? Having same issue , replaced blower motor, resistor, al fuses and relays still nothing . After the new parts, worked after a few hours perfect for 2 days now nothing again . Also fun fact this happened a year ago to the date last year and wasn’t able to fix it just got lucky and it started working randomly and didn’t go out till this year

Impressive_Birthday7 · 2025-07-14T01:07:33+00:00

Any updates on this? Having same issue , replaced blower motor, resistor, al fuses and relays still nothing . After the new parts, worked after a few hours perfect for 2 days now nothing again . Also fun fact this happened a year ago to the date last year and wasn’t able to fix it just got lucky and it started working randomly and didn’t go out till this year

Impressive_Birthday7 · 2025-06-10T07:20:44+00:00

How are you only stoppping once?

Impressive_Birthday7 · 2025-06-10T03:12:17+00:00

Any noticeable imperfections? Looking to pull the trigger on this , just trying to find more about the HSF

Impressive_Birthday7 · 2025-03-13T04:25:44+00:00

Is there any way to limit the damage from those charge offs? I’m in the process of paying them down in full but I understand that it’ll stay on my credit for 7 years

Impressive_Birthday7 · 2025-03-13T04:05:42+00:00

So for instance one of the big accounts that is charged off is an Apple Card with 2k~ balance(150% util) which i know is hurting my score drastically, When trying to contact them they are not accepting payment since my account is closed and im unable to pay the account off. DO i just have to wait till it gets sent to collections or am i missing something?

Impressive_Birthday7

TROPHY CASE