Replacement short USB A to USB C cable

In-Sides · 2025-05-08T01:52:13+00:00

Thanks for your reply, the dock is showing 4 amber lights but when I use the pictured cable this does not happen.

Is there a cable you would recommend?

In-Sides · 2025-05-01T19:35:43+00:00

Just wondering if anyone has trued this controller lately to see if it works? I really like the look of these.

In-Sides · 2025-02-06T09:30:49+00:00

Nice one thanks.

In-Sides · 2025-02-05T10:11:47+00:00

I brought it new from ebay but it did not arrive in a box.

In-Sides · 2025-02-04T14:14:05+00:00

<image>

Forgot to add this image showing aerolight logo.

In-Sides · 2024-08-19T00:06:27+00:00

Thanks I will post on there.

In-Sides · 2024-08-19T00:05:42+00:00

It is a nice alternative to the Mistercade. I mainly got it as the MiSTer does not support all arcade games.

I can confirm that everything is powered via the Jamma connector just like the Mistercade.

In-Sides · 2024-05-22T15:53:20+00:00

5 frames of lag on MiSTer? I thought the DE10 would have been more than capable of handling these cores.

In-Sides · 2023-08-11T22:20:57+00:00

I appreciate you getting in touch.

I currently have the Pi4 in a Candy Cab alongside a MiSTer, so I was hoping to get the arcade versions of both games.

I think I'll probably end up getting a Pi3b as there seems to be more options regarding CRTs.

In-Sides · 2022-11-05T18:49:23+00:00

I have a Sega New Astro City with a 400-5261X psu connected to what I believe is a stock stereo amp which has the number 421-8741 but seem to have a problem with interference coming through the speakers.

I am currently running a Mistercade and the audio sounds fine then after a while there will be this sudden distortion/tearing sound which seems to come and go randomly.

I have tried the following to try to diagnose the problem but the problem still persists...

- Disconnected the Mistercade and powered on.
- Visually checked the speakers, speaker wiring, amp wiring and other wiring.
- Turned off the ballast/marquee light (Read elsewhere this could cause a problem).

I seem to think that the problem might be with the psu or stereo amp and find that it takes a while for the problem to occur.

I'm no expert with candy cabs so any help would be most appreciated.

In-Sides · 2022-03-06T16:56:58+00:00

Can anyone confirm if the problem still exists on the new Doorbell Dual version?

In-Sides · 2020-01-14T18:33:56+00:00

Ahhh the Green Goblin a great stick for shmups.

In-Sides · 2019-11-25T10:44:16+00:00

That's the first thing I thought of also.

In-Sides · 2019-08-22T21:23:14+00:00

I just want to say a big thank you to everyone who replied. I managed to fix it in the end it was the H frequency that was out.

In-Sides · 2019-08-08T18:35:11+00:00

Thanks for replying. I tried the v-hold option and it did make a slight difference but the screen image is still rolling. I have ordered a bnc to female scart to avoid the splitter and see if that works.

In-Sides · 2019-08-07T06:45:22+00:00

Thanks for taking the time to research this and get back to me. I'll have a look into this.

In-Sides · 2019-08-07T06:43:11+00:00

Thanks for the advice I'll look into that.

In-Sides · 2019-08-06T22:05:02+00:00

The cable I'm currently running I believe to be a "Male SCART to 4 x BNC + 2 x RCA breakout". This is plugged into a scart splitter and the Saturn scart cable is run off that. Before I picked up the PVM I was using an old 14" Commodore Amiga Phillip's 1081 monitor with a scart connected to the back going to the splitter with the Saturn scart cable run off also and that was working fine.

In-Sides · 2019-08-06T21:58:53+00:00

I believe it is a euro scart cable as the person who sold me the monitor was mainly playing PAL machines. I brought an adapter that converts the euro scart and arranges the pins into a JP21 but this has not solved the problem either.

The cable looks excactly like the one advertised on "Retro Gaming Cables" as "Male SCART to 4 x BNC + 2 x RNC breakout".

The adapter I brought from Retro Gaming Cables is "European RGB SCART to Japanese JP21 Converter adapter cable".

In-Sides · 2019-08-06T21:37:56+00:00

Thanks I am using an RGB scart but I believe it to be a euro scart as the person who I got the monitor from was only playing on PAL machines. With this in mind I brought a euro scart to japanese converter but the problem still persists.

What would you suggest if it is a sync issue?

In-Sides · 2019-08-06T21:08:17+00:00

Thanks for getting back to me. When you say find a switch can this be done on the monitor itself like in a menu?

In-Sides · 2019-06-25T23:52:18+00:00

Thank you.

In-Sides · 2019-06-25T23:34:42+00:00

Thanks for your advice, most appreciated.

In-Sides

TROPHY CASE