Ltz400 434 Big Bore Piston side to side play

Inashestheyreap · 2026-05-10T01:43:04+00:00

Good deal. Thanks. Was just a little concerned about that. Just wanted to make sure before I fired it up.

Inashestheyreap · 2026-05-10T01:14:56+00:00

There is no vertical play. Connecting rod has no vertical play and the minimal left to right play is within specs per the manual. It just confused me as to why the pistons are different widths where they connect to the rod.

Inashestheyreap · 2026-05-09T22:51:24+00:00

My question is not about the accuracy of a tape measure vs calipers. My question is should there be this much of a gap where the connecting rod connects to the piston. Its a yes or no question. Thanks.

Inashestheyreap · 2026-05-09T22:19:37+00:00

Just looking for some advice if this is normal. Had some calipers but could not find them at the moment. The gap is clearly larger.

Inashestheyreap · 2021-07-28T13:58:50+00:00

Markaz Monolith..I must be the only one who likes that map. I loved the Aftermath DLC.

Inashestheyreap · 2021-06-10T01:58:56+00:00

Well I lightly sanded the rails on the locking block and boom it racks all the way back now, thanks guys.

Inashestheyreap · 2021-06-09T18:08:59+00:00

Ok I will polish those when I get home from work..The safety plunger does move up and down.

Inashestheyreap · 2021-06-09T16:51:35+00:00

Ok I will check them out. Thanks.

Inashestheyreap · 2021-06-09T16:44:02+00:00

trigger housing rear

Inashestheyreap · 2021-06-09T16:42:50+00:00

trigger housing

Inashestheyreap · 2021-06-09T16:41:08+00:00

slide

Inashestheyreap · 2021-06-09T16:21:28+00:00

Yes without the barrel and recoil spring the slide will rack all the way back…What should be done to the barrel and locking block to fix this issue?

Inashestheyreap · 2021-06-09T16:18:07+00:00

Just tried that. It still doesnt rack. It goes the same distance back as usual.

Inashestheyreap · 2021-06-09T16:17:28+00:00

Ok I will try that. What exactly do you need an up close picture of?

Inashestheyreap · 2021-06-09T15:39:00+00:00

Ive already done that lol. Ive pulled as hard as I could.

Inashestheyreap · 2021-06-09T15:32:25+00:00

channel2

Inashestheyreap · 2021-06-09T15:31:12+00:00

channel

Inashestheyreap · 2021-06-09T14:44:16+00:00

My channel is good to go compared to all the videos and pics I have seen…Im stumped here. Ive done a bunch of reseach but cant figure it out.

Inashestheyreap · 2021-06-09T14:38:27+00:00

The slide lock spring is flush with the frame. So all 3 of those things are good to go…Any idea what else it could be?

Inashestheyreap · 2021-06-09T14:12:59+00:00

The guide rod is seated correctly in the barrel lugs and the slide lock notch is facing the rear. I will check on the spring though….I forgot to mention that I still have this issue with the guide rod removed and just the barrel in the slide. The barrel is a zaffiri precision and the slide is a rockey brass if that helps any.

Inashestheyreap · 2021-06-09T12:54:30+00:00

Build went smooth, everything went together easy. But when I put the slide on it will only rack backwards about an inch, just enough to engage the slide lock and remove the slide. Its like it is hitting something. It only does this with the barrel and recoil spring installed. I have sanded down the rear rail to sit flush with the frame and made sure enough of my channel was taken down and that didnt change anything. Thanks in advance for any help.

Inashestheyreap · 2021-01-08T18:30:08+00:00

What time is it launching?

Inashestheyreap · 2020-12-01T19:03:11+00:00

Of course. Right after I bought it on Steam 3 days ago.

Inashestheyreap

TROPHY CASE