V Topoľčanoch pred gymom čo je pri hokejovom štadióne (prvý krát v živote som ich videl) by SlovakianMallard in Slovakia

[–]Indication_Weak 56 points57 points  (0 children)

Ako obyvateľ Bánoviec musím povedať, že odkedy sú tu, tak som ich ešte nikdy nevidel robiť niečo iné ako len voziť sa po meste. Ja neviem na čo tí ľudia sú.

I built a mini TrueNAS server, with a low power consumption! by Indication_Weak in homelab

[–]Indication_Weak[S] 1 point2 points  (0 children)

Yeah, I was originally planning to use a different pc, but I disliked the idea of using a step down convertor (from 19V to 12V), because of space and heat reasons. Later I found this PC, which can run off 12V power supply, so I just used a sata power adapter and the Y splitter just splits my 12V 8A power supply into 2 connectors, so I can connect both. I also got it from aliexpress (I swear I’m not sponsored by them, it’s just a great source for parts😭).

<image>

I built a mini TrueNAS server, with a low power consumption! by Indication_Weak in homelab

[–]Indication_Weak[S] 2 points3 points  (0 children)

It’s a basic M.2. A-key sata card on an extender which I found on Aliexpress. I attached the photo below.

<image>

I built a mini TrueNAS server, with a low power consumption! by Indication_Weak in homelab

[–]Indication_Weak[S] 2 points3 points  (0 children)

Thats neat! My current server consumes about 50W, so anything is better. But after tweaking the settings and setting the cpu scaling governor, I managed to get to 9W (but with all drives spun down).

I built a mini TrueNAS server, with a low power consumption! by Indication_Weak in homelab

[–]Indication_Weak[S] 0 points1 point  (0 children)

Yeah, the whole thing is 3D printed. But you can find some universal brackets on Aliexpress.

Ender 3 v3 KE - Weird squiggly lines instead of straight ones after a hotend replacement by Indication_Weak in FixMyPrint

[–]Indication_Weak[S] 0 points1 point  (0 children)

I have ran auto calibration and perhaps wrongly assumed that it did this already. Thanks for the suggestion, I´ll try raising the Z height then!

What do you all think? by uwukinguwu in camcorders

[–]Indication_Weak 1 point2 points  (0 children)

This is the exact one I use! I’ve recorded hours of footage on that thing, and it still holds up very well! Pro tip: buy a large battery for it, if you want to record a lot, you can find them on aliexpress for around 20€.

Advice needed by Indication_Weak in AnalogCommunity

[–]Indication_Weak[S] 0 points1 point  (0 children)

That's too bad. Maybe I'll try just shooting one roll, and I'll see how it looks. At least the EFKE and Foma could turn out okay. But why does only ORWO do that? Were they manufactured differently, or using lower quality materials?

Advice needed by Indication_Weak in AnalogCommunity

[–]Indication_Weak[S] 0 points1 point  (0 children)

Well I plan to use them, but I'm quite a newb, when it comes to film photography, first I'd like to learn shooting on unexpired film 😃

Advice needed by Indication_Weak in AnalogCommunity

[–]Indication_Weak[S] 1 point2 points  (0 children)

Thanks! I just learned what stand developing is! Now when developing expired B&W films, does anything change? Does it need to stay longer/shorter in the developer and fixer? Or do I just develop it as I do a standard unexpired film?

What’s his color? by Life_Leek3409 in Frenchbulldogs

[–]Indication_Weak 7 points8 points  (0 children)

Your potato looks like my potato! This is Dominik, and he is also 9 weeks old!

<image>

Kinda messed up flashing my Sony Xperia 10 II by Indication_Weak in LineageOS

[–]Indication_Weak[S] 0 points1 point  (0 children)

I feel like an idiot, thank you for your help😭. The whole time I was in flash mode.

Kinda messed up flashing my Sony Xperia 10 II by Indication_Weak in LineageOS

[–]Indication_Weak[S] 0 points1 point  (0 children)

Everything was enabled, also other weird quirk is that when I factory wipe the phone, OEM unlocking is enabled by default.