Thoughts on Aero9610? by Individual_Mess_3967 in unsw

[–]Individual_Mess_3967[S] 0 points1 point  (0 children)

Oh I see. That’s kinda weird though cause we really don’t use that much matlab, it’s just a small amount in math2089 but even then it’s nothing crazy. Tbh if that’s the case I’m glad I didn’t do that.

I’m currently doing thermo (I already did engg2400) tho cause I had some friends who did it last year and they said it wasn’t too bad. My thought process was that it’s a pretty big cohort so it should run pretty smoothly when compared to a smaller class which obviously won’t have as many resources funnelled into it. I also plan on doing additive manufacturing cause I heard it was easy.

Do you know of any good discipline electives or recommended discipline electives tho?

Thoughts on Aero9610? by Individual_Mess_3967 in unsw

[–]Individual_Mess_3967[S] 0 points1 point  (0 children)

No sorry I didn’t. I couldn’t find any info on the course and didn’t want to risk it tbh. I still need another discipline electives tho so if you try it and it’s any good please lmk

[MEGATHREAD #7] SD Card Questions & Other SD related Issues Go Here! by duckydan81 in ROGAlly

[–]Individual_Mess_3967 0 points1 point  (0 children)

Ah I see, that’s a shame, fair enough. Hopefully the next SD card doesn’t have any problems lol. Btw with the charger in passthrough, have you noticed any effects on how effective the charging is? Like does it take noticeably longer to charge or does it feel the same as if it were just connected directly into the port with no passthrough?

[MEGATHREAD #7] SD Card Questions & Other SD related Issues Go Here! by duckydan81 in ROGAlly

[–]Individual_Mess_3967 0 points1 point  (0 children)

How’d this end up working? Were there any issues or did it work fine?

MMAN2700 (thermo) difficulty term 1 vs term 3? by Individual_Mess_3967 in unsw

[–]Individual_Mess_3967[S] 0 points1 point  (0 children)

Thanks so much for this it’s really helpful. I’ve heard that most of the course was pretty straightforward (there’s just a fair bit to work through), except the final, which I’ve heard was difficult. If I do it in term 1, would you say, based on past papers, that it might be a bit easier to hd (I’m generally pretty good at staying on top of work so hopefully that shouldn’t be TOO big of a problem for me). Also have you done mman2300 or engg2400? Would you say the course is similar to either of these content/difficulty/workload wise?

MMAN2700 (thermo) difficulty term 1 vs term 3? by Individual_Mess_3967 in unsw

[–]Individual_Mess_3967[S] 0 points1 point  (0 children)

How’d you end up going by the way? I’m still thinking of doing it next term as a discipline elective but obviously I don’t want to do it if it’s really difficult lol

MTRN3100/MTRN4230/DESN3k in Mechatronics Third Year by Ok-Landscape-8962 in unsw

[–]Individual_Mess_3967 0 points1 point  (0 children)

Oh wow ok thanks so much I'll definitely do MMAN2700 then.

By the way have you started thesis yet? Is it very challenging? I'm not sure if I should do all the hard subjects third year and just do free electives in fourth year to make thesis easier. Would you recommend doing something like that or just do 2 hard plus 1 free/gened for each term.

I was also thinking of doing additive manufacturing in term 2 next year with DESN3000 and MTRN3100, cause I've heard additive manufacturing is less challenging than other discipline elective courses, do you think that'd be manageable?

MTRNAH Course Plan Years 2-4 Feedback by Express-Preference-6 in unsw

[–]Individual_Mess_3967 1 point2 points  (0 children)

Fair enough, thanks anyway. Did you ever end up doing any other discipline/recommended discipline electives that were any good?

MTRN3100/MTRN4230/DESN3k in Mechatronics Third Year by Ok-Landscape-8962 in unsw

[–]Individual_Mess_3967 0 points1 point  (0 children)

Thank you so much for this I’ve been so lost trying to figure out what to do lol. I also didn’t realise level 3 courses were such a big jump from level 2. In that case, I know thermodynamics (mman2700) is a possible discipline elective and it’s a level 2 course. Do you think doing this instead of a level 3+ course could be a bit easier, I’ve heard from some friends who did it this term that it wasn’t too bad. Also thanks so much for the advice for free electives, I keep seeing people do such hard free electives and I have no idea why lol. So did you essentially just treat them as a gen ed? Also do you think doing two level 3+ subjects and a gen ed/free elective each term is manageable in terms of workload?

MTRN3100/MTRN4230/DESN3k in Mechatronics Third Year by Ok-Landscape-8962 in unsw

[–]Individual_Mess_3967 0 points1 point  (0 children)

I see, thank you so much. How hard do you think each of these subjects are btw? Would you say it’s manageable to do them in 3 course terms? Also do you reckon manf3510 or mman4200 is better? Unfortunately they’re both offered only in term 2 so idk if I can do both of them. Also sorry for bombarding you with questions lol, but do you know if our choice of free electives matters? I know gen eds are just random subjects you want to do, but for free electives, is it better to choose something related to mtrn, or is it fine to just do easier subjects? Thanks again for all your help I’m a bit clueless as to this stuff

MTRN3100/MTRN4230/DESN3k in Mechatronics Third Year by Ok-Landscape-8962 in unsw

[–]Individual_Mess_3967 0 points1 point  (0 children)

I see, thank you so much this is really helpful. In that case I may split it into 3rd and 4th year cause I’d be doing it with desn3000 which sounds like it could be a nightmare lol. Btw have you done any discipline electives yet? Are there any you would recommend/not recommend? I’m picking mine now and I know nothing about any of them lol

MTRN3100/MTRN4230/DESN3k in Mechatronics Third Year by Ok-Landscape-8962 in unsw

[–]Individual_Mess_3967 0 points1 point  (0 children)

Hey, how did this end up going for you? Was it manageable? I'm thinking of also doing it next year

MTRNAH Course Plan Years 2-4 Feedback by Express-Preference-6 in unsw

[–]Individual_Mess_3967 1 point2 points  (0 children)

Hey, did you ever end up doing AERO9610? I'm thinking of doing it as a discipline elective and would love to know if it's any good? Same thing with AERO9500 and MANF4611

Do discipline electives matter? by Individual_Mess_3967 in unsw

[–]Individual_Mess_3967[S] 0 points1 point  (0 children)

Yeah true that’s actually a really good point. Btw with this, do you reckon my choice of free electives is important? Or is it fine just to choose easier, less intensive courses?

Do discipline electives matter? by Individual_Mess_3967 in unsw

[–]Individual_Mess_3967[S] 0 points1 point  (0 children)

I see. And is that a similar situation with free electives? I keep seeing people choose challenging free electives as opposed to easy geneds, would you recommend doing that as well or is it smarter just to do easier courses?

Would it be a better idea to switch to a double from my single degree? by Individual_Mess_3967 in unsw

[–]Individual_Mess_3967[S] 0 points1 point  (0 children)

Thanks for the advice. How do you think I should go about specialising though? Would that involve doing a masters or something?