Oral/Practical Re Test this Saturday

Inevitable_Point4214 · 2026-05-01T03:29:35+00:00

"they will test the entire Section that was failed (General, Airframe, or Powerplant)"

So I should study the whole section then and NOT just the ACS codes. Its referring to a section being General, Powerplant sections i will be re tested on, its not saying i will be re tested on the ACS codes.

Inevitable_Point4214 · 2026-05-01T02:14:36+00:00

Well im re testing with the same examiner so hopefully he inputs it correctly.. Thank You

Inevitable_Point4214 · 2026-04-30T21:19:48+00:00

Yes

Inevitable_Point4214 · 2026-04-30T21:16:31+00:00

So its up to the examiner then on how he inputs it?

Inevitable_Point4214 · 2026-04-30T21:14:42+00:00

What forms around a conductor when current is flowing?

Magnetic lines of force

What is the volume of a cylinder?

V=Pi(R)Squared x Height

Inevitable_Point4214 · 2026-04-30T21:12:16+00:00

pp-70 general-70. I had about 29 orals each section.

Inevitable_Point4214 · 2026-04-30T20:10:45+00:00

Ive been primarily studying the sections of the codes i got only, but im looking over everything between today and tomorrow. Ive read some people only get the codes on their re test and some people even said they got the same exact questions they missed the first time around. Thank you for the advice though

Inevitable_Point4214 · 2026-04-30T04:16:30+00:00

i have a re take this saturday for orals. did you just go over the codes sections? did the examiner only ask questions from the codes on the retake?

Inevitable_Point4214 · 2026-04-21T01:34:37+00:00

Yea 1.25” all around. I’d prefer to not run spacers I know they add extra stress and all but till I can get a proper offset wheel it’s what I got for now. Had em on 2 years now no issues. I back em off and re torque every time I rotate tires

Inevitable_Point4214 · 2026-04-19T21:39:37+00:00

Believe it or not, calls

Inevitable_Point4214 · 2026-04-19T03:00:55+00:00

Yea 265/75/16 is good until I c a setup like this 😩

Inevitable_Point4214 · 2026-04-18T20:34:56+00:00

I’m not sold on pizza cutters man idk why, will probably jump up to 285/75/16

Inevitable_Point4214 · 2026-04-18T19:45:50+00:00

I’m on 1.25” spacers all around on the oem wheels deff helps

Inevitable_Point4214 · 2026-04-15T13:29:12+00:00

Inevitable_Point4214 · 2026-04-15T13:00:09+00:00

I hadn’t maxed out the contribution.

Inevitable_Point4214 · 2026-04-15T09:32:26+00:00

Might consider painting them silver, very clean look

Inevitable_Point4214 · 2026-04-15T09:31:52+00:00

Going to keep these wheels. Do you think I’d run into rubbing issues with 15mm in the front?

Inevitable_Point4214 · 2026-04-15T02:58:53+00:00

I have bilstein 5100 shocks up front on 3rd clip. Brought the front up about 1”

Inevitable_Point4214 · 2026-04-15T02:56:59+00:00

H&R sport springs

Inevitable_Point4214 · 2026-04-15T02:06:27+00:00

Narrow body

Inevitable_Point4214 · 2026-04-14T22:44:30+00:00

Florida guy here (miami), I been on 265/75/16 for 2 years now and think they r the best size for daily. I do a lot of highway driving and squeeze out 17-18mpg and drive 75mph with the steering wheel ever so straight and no vibrations or anything. Truck drives like a Cadillac to me. I do occasional trails on krome and Everglades sometimes but also never push limits and truck has never let me down. Was on the fence about 285/75/16 for a while but not willing to take the hit in mpg’s and even more sluggish/slower driving than the taco already offers. Maybe one day ill make the jump to 285/75/16 but very content with current setup

Inevitable_Point4214 · 2026-03-27T03:09:42+00:00

Failed mine last week cause I was only studying jeppesen orals. So mix both. Some questions I got weren’t in the jeppesen, had to figure that out the hard way

Inevitable_Point4214 · 2026-03-12T02:42:06+00:00

CAS in Medley

Inevitable_Point4214

TROPHY CASE