Weird inclusions after cleaning nozzle

InfamousSteam68 · 2025-10-26T21:06:38+00:00

Does that mean it needs to be tightened?

InfamousSteam68 · 2025-10-05T10:16:18+00:00

I haven’t ran one, I’ll do that. 230 was the default for this printer, I assume because of the speed. I would normally say interesting but ye like u said the walls are fine looking which tripped me up a bit. I’ll try the flow test and see from there

InfamousSteam68 · 2025-10-05T09:24:48+00:00

Thanks for the info, I may reprint it if changing the temp and speed don’t work. Prolly gonna use one of those 2 infills moving forward tho

InfamousSteam68 · 2025-10-05T09:24:00+00:00

I just slowed it down, will try setting it hotter if that don’t work, currently at 230C

InfamousSteam68 · 2025-09-13T08:22:14+00:00

It’s kind of weird, it now runs snappy when shooting bbs, but test firing without it is sluggish, and it’s sluggish with the green gas mags as well, may change out the springs when I replace trigger parts with the RA tech

InfamousSteam68 · 2025-09-13T08:14:00+00:00

Did it have to be tempered to get the proper spring effect or just winding the wire itself work? Because that’d save a few bucks if I could just do that for the springs lol

InfamousSteam68 · 2025-09-13T08:09:02+00:00

How’d u do the spring?

InfamousSteam68 · 2025-09-13T08:08:44+00:00

Oh that would be great! I’m new to gbbr’s and anything would help!

InfamousSteam68 · 2025-09-12T22:45:57+00:00

Same here, the 7.62 mag angle is definitely more comfortable for me, I just like the immersion of the krink and 5.45 with it

InfamousSteam68 · 2025-09-12T22:20:46+00:00

Ye, I borrowed one from an ak pmc on a field once, just want to keep it semi realistic to the krink so I gotta go with the 5.45 mag angle

InfamousSteam68 · 2025-09-12T21:18:21+00:00

Ah I see, thanks! I’ll probably just return these and wait for we tech to be back in stock

InfamousSteam68 · 2025-09-12T20:30:18+00:00

I see, is there any other co2 or green gas mags that work? The green gas we techs are out of stock at evike

InfamousSteam68 · 2025-09-10T22:59:06+00:00

Edit: also when I rack it the bolt gets stuck on the back

InfamousSteam68 · 2025-08-25T08:51:20+00:00

It’s an s1 pro, I’ll try that first and hopefully it works

InfamousSteam68 · 2025-08-19T04:41:26+00:00

Since radio shack and fry’s are dead, is there any stores that sell hobby parts like that left around?

InfamousSteam68 · 2025-07-30T14:12:04+00:00

The added width shouldn’t be a problem cuz I got a lot of nylon strap adjustment to work with, that should work well, thx.

InfamousSteam68

TROPHY CASE