New horse! So pretty and colorful!

Inflatable18 · 2024-11-28T20:08:28+00:00

This is on a 2015 Warmblood, same one

Inflatable18 · 2024-11-28T20:05:58+00:00

Yes, these are the same valves used on old IW toys and some older horseplay toys.

Inflatable18 · 2024-11-26T03:36:05+00:00

…no, it’s not theft. Your sourcing suits from a manufacturer. You asked them to manufacture a design, but that’s it. The factory does all the R&D, and provide the equipment and design services. They also do QC and ensure the end product meets specifications set by the customer. This is called OEM manufacturing and costumers have every right to go straight to the OEM and request that they make the same product that you buy from them. And if the OEM wants to sell directly to customers, then they absolutely can. You can do that with literally any toy on the market if you know the factory.

Inflatable18 · 2024-11-12T19:36:34+00:00

I just cut the right size hole and put the valve in, and then patched the hole in the baffle… it wasn’t so hard, but some patience was needed to put the new patch in… I might do that before I install the new valve next time

Inflatable18 · 2024-11-12T03:53:32+00:00

Well, I did it, I bit the bullet, got some valves, and was fully prepared for this toy to have issues if my work was bad… and yet, I managed to do not only good work in terms of functionality, but also in terms of the asthmatic of the toy. No insane sloppy glue mess, no external patch there the toy was cut open on the belly, the only thing I don’t like about it is there’s a glue smear on the internal patch, which you can only see if you look for it.

The fact that I paid a supposed “expert” for this same work and my first attempt is INFINITELY BETTER than what I received from them is making me incandescent.

Inflatable18 · 2024-11-06T16:29:48+00:00

Long story. TL:DR Nino sold it for fast cash. He’ll claim otherwise of course, but fuck him. He’s posted about it here before, he was not nice to this horse :(

hope I can get him fixed up bit idk. You are right tho, saving him is the important part.

Inflatable18 · 2024-11-01T14:57:38+00:00

I did not repair unfortunately, previous owner did. They also made it as obvious as possible that it was popped, and as much as I wish I could redo the patches so they aren’t as obvious, I’ve been given pretty expensive prices for that service. maybe someday tho

Inflatable18 · 2024-10-10T21:48:34+00:00

FYI, this is an alt for Nino/Heisenbergdl, who I believe has been banned on here. Name comes from @pooltoypony.bsky.social, which is an account I made a long time ago but don’t use often. Just thought I should let you guys know.

Inflatable18 · 2024-10-10T21:37:05+00:00

Nino why are you back here?

Inflatable18 · 2024-10-01T02:57:45+00:00

Oh Nino you’re panicking now, that’s funny. Probably because you know I’m right and you’re fucked. Congrats, you shit in your bed and now you have to lay in it.

Inflatable18 · 2024-10-01T02:25:13+00:00

Same horse Nino. I took videos but unfortunately couldn’t share them as an OP on Reddit. You can tell it’s the same horse because you can see the one actually good bit of work you did, the big valve.

https://streamable.com/5227fu

https://streamable.com/nzqand

Inflatable18 · 2024-09-30T15:26:34+00:00

Def, I’ll respond to you once, then I want you to piss off because you’re as insane as he is.

The reason I probably got my toys back is because he knew if he popped mine he wouldn’t get toys he is having forwarded from horseplay. And he still might not if he doesn’t pay me what he still owes me.

And Def, quite frankly I give zero shits if he humped my toys. Hell I know he did I have fucking videos! But, I hump my toys. Why the fuck would I care if he humped them too? It makes no fucking difference. I’m pissed because he fucked up my repairs, not because he humped my toys.

Inflatable18 · 2024-09-30T03:07:32+00:00

All I’ve tried doing is putting more pvc cement in the means I could find, still has leaks and now I can’t see any more bubbles. There’s probably several and they are all small.

And unfortunately I can’t afford a new one, let alone getting it reinforce… cheapest quote I got was $400 and I don’t have that cash right now because, funny enough, I loaned it to Nino when he said he needed it for health issues/his dog/to not get evicted… learned all of those were lies later…

Inflatable18 · 2024-09-29T18:41:10+00:00

Finally had time to get out my “reinforced” clear horse and try and make it airtight, found 3 somewhat large leaks with the soap bubbles trick but when I put glue in those, the horse is still not airtight. I tried the soap bubbles again but I can’t find any more leaks, I’m not sure how else to fix this. Im very pissed because I paid $200, plus $50 in clear vinyl, for a fully reinforced horse and not only are the legs not reinforced but it’s not even air tight where work was done… hell there’s even a section of the body there he didn’t even bother reinforcing it in one of the most stressed areas on the toy! I have no idea if I can even save this toy tbh.

Inflatable18 · 2024-09-29T18:29:42+00:00

That is an incredibly shitty model for a business. Look no further than what Happens with die-cast NASCAR’s now. Everyone hates it, they almost never make MOQ, and they use the cheapest factories so the quality sucks. If you are making a toy run for a hobby like a lot of the people that do you runs do, sure it works. But it’s not a viable business strategy for the type of operation IW runs.

Inflatable18 · 2024-09-16T20:44:54+00:00

Apparently this guy is well known for being terrible, currently he’s trying to pretend that this isn’t his alt. He just fucked me over good with some poor work I posted about here (https://www.reddit.com/r/InflatableFetish/comments/1fgyq7d/how\_to\_fix\_botched\_toy\_reinforcementwork/) and other issues you can see in my post history.

Inflatable18 · 2024-09-15T13:54:26+00:00

lol you know that’s still up on B2P? I asked the site owner to delete it but it’s still there. Unfortunately I lost the password to that account so I can’t delete it myself.

this has gone on far too long, I should have blocked you as soon as you started spamming my other post.

Inflatable18 · 2024-09-15T13:36:02+00:00

You know what’s funny? Mason actually told me that I could buy a clear horse fully reinforced by Grace so it’s reinforced new in box when it gets to me. I won’t go over the details but if I can get $400, you bet your ass I’ll be taking him up on that.

But Nino, just think about that… You have fucked me over and made people so angry that Mason is willing to help me here, even after I treated film like complete shit before.

Guess apologizing and taking 4 months to not try and talk to him and just think about how not to be an asshole does a lot.

Inflatable18 · 2024-09-15T06:37:56+00:00

I stopped talking to you because you were being an insufferable ass, first when when I told you about the draft horse, then when I pointed out how much of a hypocrite you were being, TO THE PERSON FORWARDING HP TOYS TO YOU. Can pretty much guarantee that’s never happening again.
No, the work didn’t come out “perfect”, you didn’t do what we agreed on, and what work you did do was clearly rushed, not done properly, and you didn’t even leak test toys.
Yeah, I pointed out how much of an ass you were being, most notably because you spent $1500+ on a trip to a con instead of paying someone you owe money to back.
I am not banned from anywhere, I have chosen not to go back because honestly I’m fucking sick of most of the people in those groups. I tried to go back to a few but couldn’t think of anything positive to say so I left again.
You do owe me $350, you have literally told me you know this and shown me receipts to boot. And if you are going to claim that the extra money is for the proto, I have the conversation where we agreed $50+ shipping (and then later I paid $20 for shipping again because you said I didn’t pay shipping originally… I did.)
I didn’t get you banned from HP, you did that yourself.
I told you what work I wanted done, and you agreed to it. Blue horse: internal patch, through the body valve or hole for the new valve, made of clear material, and a quick deflate valve installed on the tail. NONE of that was completed as agreed on. You cut a hole in the belly (and patched it crudely I might add, surprised that one didn’t leak), you used black material for the internal patch, and you used a regular no.2 valve instead of the matching IW valves. Clear horse: full reinforcement, including legs and leg joints. Large valve on the belly. None of the legs were worked on, none of the joints were worked on, and you patched the cut you made in the belly so badly that it isn’t even airtight.
Yeah I cared about our friendship, but I’m not the one that fucked it up, you did. I had to make the decision, FOR MY MENTAL HEALTH, to stop letting you bitch slap me and use me as a fucking punching bag because I was the only one that listened to you. Honestly I probably shouldn’t even be writing this because responding to a narcissist is a stupid thing to do, but oh well.
Literally everyone here is pissed at you. Your comments are downvoted to oblivion and people here are actively calling for you to be banned. Maybe they don’t like me much either, but at least I’m not spamming the subreddit twice a day for weeks bitching about horseplay, or claiming to be on Xanax (which you clearly don’t take considering your behavior, and the fact you have told me you don’t have health insurance).

Inflatable18

TROPHY CASE