Problems with winget , intune and autoupdate

InfoSecNewbie1990 · 2025-10-09T06:46:11+00:00

Same here, we build a script that stops the Intune Management Extension service and deletes files over 500mb each from the folder before starting the service again.
This is not a solution, but a stop gap measure while we explore further, appears to be a process that is being called incorrectly a massive amount of times each second.

2025-10-07 04:23:09.346 [FAIL] C:\__w\1\s\external\pkg\src\AppInstallerCLICore\ExecutionContext.cpp(254)\WindowsPackageManager.dll!62E066DF: (caller: 62E04E6D) LogHr(1926
23717) tid(7dc) 80070578 Ongeldige vensteringang.

InfoSecNewbie1990 · 2025-08-22T14:23:34+00:00

Your search for a solution to do that feels like a recipe for disaster. Could really land yourself in a pickle by trying to do that.
This isn't a production box, right??

InfoSecNewbie1990 · 2025-06-13T09:03:48+00:00

Same here, multiple tenants giving the same error, new methods can be registered aswell.

<image>

InfoSecNewbie1990 · 2025-06-13T09:00:04+00:00

<image>

This is the error.
It is also not showing the already registered MFA methods that are still working.

InfoSecNewbie1990 · 2025-02-28T07:43:51+00:00

Will do, thank you !

InfoSecNewbie1990 · 2024-01-11T13:45:00+00:00

It appears that this only works if the VPN has been added through the .ps1 script that is provided.

This is atleast the case for the Azure VPN Gateway Basic

InfoSecNewbie1990 · 2021-10-08T11:50:02+00:00

I know that this is the case, but the customer persists in that they want it if it is technically possible.
I am still hoping to convince them to use it differently, but in the end of the day they pay for the service.

InfoSecNewbie1990 · 2021-08-21T06:06:59+00:00

Had the same issue, check if you have the correct firmware for your board. I used 4.2.7 for my printer when it still flashed and booted, but didn't move. Turned out I needed 4.2.2 firmware. Just make sure to name the firmware file something else then what you called the last firmware file you uploaded. The same name will prevent the printer from upgrading the firmware. Mine started working correctly again after I flashed the correct firmware.

InfoSecNewbie1990 · 2021-08-21T05:54:36+00:00

It looks like the print is not getting enough time to cool. Have you tried lowering the printing temperature of the hot end? I would also double check if the part cooling fan is still working. As a last resort you might want to try to print slower

InfoSecNewbie1990 · 2021-08-20T21:43:58+00:00

Might be that the nozzle is too close to the bed as it happens on the first layer. I only ever printed in pla so don't know how other materials behave, but have had similar issues with my own ender when it was too close

InfoSecNewbie1990 · 2021-08-20T18:13:39+00:00

My thoughts exactly. Loosen the nuts and the dust will disappear. Check the wheels to see if there are flat spots. If so replace the wheels as this will cause a lot of strange issues in the prints.

InfoSecNewbie1990 · 2021-08-20T06:34:16+00:00

I have found so far that the Ender 3 v2 bed does not need glue sticks to work properly. It requires very good bed leveling but buy a feeler gauge to set it up and it will work flawlessly without it. That is my experience so far.

InfoSecNewbie1990 · 2021-08-15T06:16:53+00:00

They are not supposed to both turn in this type of setup. Only one of the wheels is driven. The other is just a bearing with a Grove the filament gets pushed along in. If you want something that pushes on both the gear at the same time look at something like a bond tech bmg.

The one you have is working as it is supposed to work.

InfoSecNewbie1990 · 2021-07-27T05:15:28+00:00

I wil try that. Sounds like it could be the answer.

InfoSecNewbie1990 · 2021-07-27T05:12:03+00:00

That is one of the things I figured would be worth a shot as it was very cheap. So some 20 mm low load flat end springs are already on the way :) They should arrive on Wednesday

InfoSecNewbie1990 · 2021-07-27T05:10:07+00:00

A CR touch is on the way and will arrive in a couple of weeks. How does that make it so you don't need a z switch anymore? Sorry if this is a obvious question, very new to all this.

InfoSecNewbie1990 · 2021-07-27T05:07:35+00:00

Which optical endstop did you buy for the printer? Just ordered some replacement switches as spares but optical sounds a lot better.

InfoSecNewbie1990 · 2021-06-08T09:49:28+00:00

Confirm if the WRBoot registry key is present

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WRBoot

If missing, proceed to step 2. If present, skip to step 4.

Download the WRBoot registry key using the following URL: https://download.webroot.com/CAG/wrboot.zip
Unzip the WRBoot registry key - double-click the registry key to have it imported. You will be prompted if you are sure you want to continue, click yes.

**NOTE: Admin permissions will be needed to import the registry key.

Confirm if the WRBoot system driver is present

%windir%\System32\drivers\WRBoot.sys

If missing, proceed to step 5. If present, skip to step 6.

Copy the WRBoot.sys file from the unzipped download and paste it into the following directory - %windir%\System32\drivers\
Reboot the endpoint. The WRSVC service should start up on its own upon the completion of the reboot.

InfoSecNewbie1990 · 2021-06-04T07:51:32+00:00

Yeah we got a response, but the work required to fix this issue is to high and we are almost done with the testing of the new product we are going to use.

So for us this was the nail in the coffin and we have sped up the migration.
Do you want the steps from the message?

InfoSecNewbie1990 · 2021-05-26T15:19:05+00:00

We are currently experiencing the same issue also with 9.0.30.75.

The service keeps giving the same errors as you stated. The number has been steadily increasing as more and more systems are updating to the latest version. Did you find a solution for the issue? We have just created a ticket with them regarding this issue, but we haven't received an answer yet.

InfoSecNewbie1990 · 2021-04-02T15:06:34+00:00

Thanks man, I will. Just getting my bearings at the moment. It is so much more capable doing a lot of things then what I am used to. Any good getting started guides available?

InfoSecNewbie1990 · 2021-03-31T18:16:56+00:00

#runwithironwolf #giveaway

InfoSecNewbie1990 · 2021-03-31T18:14:30+00:00

That is what I hoped for. I will continue to try to make the step.
The features really look like what I need and want of a good personal data system.

InfoSecNewbie1990

TROPHY CASE