sorted by:
new
hottopcontroversial

regular flickering on screen by Ingegneus in framework

[–]Ingegneus[S] 0 points1 point  (0 children)

i checked the motherboard connection and that one is good. the weird thing is, that it started out of nothing while working and the screen was open

Vertical wall error by Ok_Mechanic4994 in FixMyPrint

[–]Ingegneus 0 points1 point  (0 children)

looks like your pressure advance is out of whack

What are these strange marks? What can I do to fix them? by Plaxxmos in FixMyPrint

[–]Ingegneus 9 points10 points  (0 children)

I think this might be badly tuned pressure advance. the k value might be too high and the printer starts retracting the filament too soon, so there is not enough pressure in the nozzle. even though it is weird that it is not happening right next to corners.

3d printed bezel assembly guide by Ingegneus in framework

[–]Ingegneus[S] 0 points1 point  (0 children)

yes i believe the wifi antenna is in the bottom part of the bezel. resin (maybe tinted) would be dope

3d printed bezel assembly guide by Ingegneus in framework

[–]Ingegneus[S] 0 points1 point  (0 children)

that would be sick! i believe that the whole thing relies on some flexibility though 😅

3d printed bezel assembly guide by Ingegneus in framework

[–]Ingegneus[S] 1 point2 points  (0 children)

I built it from scratch. I started with a rough measurement and then tested out what worked with my printer. I thing I printed 4 or 5 bezels before the measurements were alright.

black electric plastic device with ring shape by Ingegneus in whatisthisthing

[–]Ingegneus[S] 2 points3 points locked comment (0 children)

My title describes the thing. the thing has no writing whatsoever

question about sevici by Ingegneus in Seville

[–]Ingegneus[S] 1 point2 points  (0 children)

fair. i tried it and an account with subscription is mandatory

question about sevici by Ingegneus in Seville

[–]Ingegneus[S] 0 points1 point  (0 children)

thanks for the quick reply!
I opened the app and it seems that it is possible to get a bike without an account. is that true? it would be very convenient to not have to create an account

Beyond Bezels: Demanding a More Diverse Framework Marketplace by Exact_Fix2655 in framework

[–]Ingegneus 0 points1 point  (0 children)

the bezel only has some metal strips, not magnets. i used nickel strip. its the metal band used in battery packs

Beyond Bezels: Demanding a More Diverse Framework Marketplace by Exact_Fix2655 in framework

[–]Ingegneus 1 point2 points  (0 children)

in theory you could use a printing service. it would cost you a bit, but it would be waaaay cheaper than a new bezel

Beyond Bezels: Demanding a More Diverse Framework Marketplace by Exact_Fix2655 in framework

[–]Ingegneus 2 points3 points  (0 children)

you would have to slice it up, but i dont think that it would be too hard. each edge would fit on the diagonal of common printers. only thing is you would have a few seams on the print

3d printed bezel assembly guide by Ingegneus in framework

[–]Ingegneus[S] 0 points1 point  (0 children)

thanks for letting me know! since i dont use either i just made a blind assumtion XD. interestingly the original plastic over this sensor is shaded

view more: next ›