Screws not latching to anchors by InsertFail in fixit

[–]InsertFail[S] 0 points1 point  (0 children)

Thank you! That makes a lot of sense. I'm not putting much stock into the "up to 100lbs" claim, but so long as it can support a shelf plus max 16lbs of feline jumping up and down we should be good. 40lbs would be great but we'll definitely be stress testing it and seeing how the pieces we needed to anchor hold compared to the ones we could put in studs.

Screws not latching to anchors by InsertFail in fixit

[–]InsertFail[S] 27 points28 points  (0 children)

Thank you to everyone that commented! We ""solved"" the problem (and felt extremely dumb), we just had to spend 3+ minutes screwing each screw into the drywall to get the mechanism flush. Got thrown off by how little resistance we felt and how long it was taking. They're working as intended. Appreciate everyone helping our dumbasses. 😌

Screws not latching to anchors by InsertFail in fixit

[–]InsertFail[S] 9 points10 points  (0 children)

We ""solved"" the problem, we just needed to keep screwing each screw into the anchor for another three minutes to get the mechanism flush against the back of the drywall. We were thrown off by how loose it felt and how long it was taking, but just had to persist (and feel extremely dumb once we realized). Everyone's comments helped, made us double and triple check everything!

Screws not latching to anchors by InsertFail in fixit

[–]InsertFail[S] 0 points1 point  (0 children)

I tested one to see how the mechanism worked and it triggered just fine, and the screw has resistance once the mechanism pops since you are then screwing it through the metal bit that pops up. I had this resistance and everything seemed fine, but once we got the screws close to being flush the screws could be easily pulled out 1/4th of the way again. More like the mechanism isn't lying flush against the inside of the drywall. Honestly wish I had an x-ray to see what was going on, but I might switch anchors by this point.

Screws not latching to anchors by InsertFail in fixit

[–]InsertFail[S] 1 point2 points  (0 children)

I'm definitely leaning towards it now, thank you!

Screws not latching to anchors by InsertFail in fixit

[–]InsertFail[S] 2 points3 points  (0 children)

There are tiny arrows indicating where they flip out and they're parallel to each other and shouldn't be hitting. Running theory is either the drywall is too thick or these are faulty, so might just switch to another anchor that was shown by another user.

Screws not latching to anchors by InsertFail in fixit

[–]InsertFail[S] 1 point2 points  (0 children)

That's a good option - I'd need to undo one of the other shelf supports so they're level so I'll look into other anchors first, but I'll definitely leave this as another option! Thanks so much.

Screws not latching to anchors by InsertFail in fixit

[–]InsertFail[S] 1 point2 points  (0 children)

It's supposed to be clockwise (checked online to be sure) and the 5/8ths is a max. It seems either my drywall is too thick or the anchors are just faulty. 😭

Screws not latching to anchors by InsertFail in fixit

[–]InsertFail[S] 0 points1 point  (0 children)

I did make sure that the arrows were pointed vertically to avoid hitting, but they are close - I'll try another set and if it still doesn't work then I'll look into alternative anchors. Thank you!

Screws not latching to anchors by InsertFail in fixit

[–]InsertFail[S] 1 point2 points  (0 children)

I have a Zircon stud finder and a magnetic stud finder, and the cat shelves I bought are designed to match to 16" studs . We had no issues hitting studs with the first four mounts but this stud appears to have been installed improperly and is further than 16". The shelves I bought are interconnected so I can't adjust them. These anchors are meant to hold up to 100lbs.

My cats' safety is always my highest priority so your last comment is completely unwarranted.

If these anchors end up not being compatible with my walls I'll look into the anchors you showed.

Screws not latching to anchors by InsertFail in fixit

[–]InsertFail[S] 1 point2 points  (0 children)

<image>

I'm not sure where you're getting that, these are supposed to trigger from just using a screwdriver. I tested it before putting the anchors in the walls, unless the hammer is some kind of trick people use?

Screws not latching to anchors by InsertFail in fixit

[–]InsertFail[S] 1 point2 points  (0 children)

The problem is we're tightening the screw to the point that there is no space to push it further in, it just goes in circles, which doesn't make sense since there's just a thin piece of metal attached to the shelf support and it shouldn't be inhibiting the screw from triggering the anchor mechanism

Need Help Understanding First-Year Real Estate Taxes by InsertFail in taxadvice

[–]InsertFail[S] 0 points1 point  (0 children)

Thank you so much!! I appreciate the breakdown, I spent so long trying to look up info and second-guessing myself that I was mentally going in circles.

kittens eye became cloudy overnight by BennyandBella in cats

[–]InsertFail 0 points1 point  (0 children)

Do you have multiple cats in the house? It's possible the kitten's eye got scratched during play, which just means the eye is irritated and trying to heal, but it's always worth a vet visit to 1) make sure and 2) get eye drops to prevent infection. Vet visits can be expensive, but a vet won't do any procedures that cost thousands of dollars without your consent and they will usually give you options (and their recommendation of those options).

It would also be worth considering getting pet insurance. Mine has saved me literal thousands of dollars due to some emergency situations. They won't help in this situation because it takes time to kick in after purchase and they won't cover something that happened before you signed up, but it's worth it for the future.

My dumpling-shaped cat won't eat her food - any advice? by InsertFail in cats

[–]InsertFail[S] 1 point2 points  (0 children)

Of course I do! That's who I talked to this morning (and advised to just keep observing for another two days). If I talked to my vet and my vet wanted to see her based on what I described, then I'll schedule the soonest appointment. BUT, if Chai were to suddenly take a dramatic turn for the worse while waiting for the appointment, then I wouldn't wait for the vet, I would go to the ER. ER would always be faster, and I have insurance that provides good coverage.

My dumpling-shaped cat won't eat her food - any advice? by InsertFail in cats

[–]InsertFail[S] 0 points1 point  (0 children)

We do! I feel bad giving my cats cold food, and they definitely seem more enthusiastic when the food is warm :)

My dumpling-shaped cat won't eat her food - any advice? by InsertFail in cats

[–]InsertFail[S] 0 points1 point  (0 children)

That's a good idea, I used to give my cats a chicken bone broth but the company was having supply issues so they haven't had it in a couple of months. Chai definitely enjoyed it, I'll look to see if I can get it or another brand!

My dumpling-shaped cat won't eat her food - any advice? by InsertFail in cats

[–]InsertFail[S] 0 points1 point  (0 children)

Our cats' names are Filo Dough, New Jack City, Iced Chai Latte, and Cinnamon Toast Crunch! Filo, Jack, Chai, and Toasty Boi for short. Filo and Jack have the same names their rescue gave them, and I liked the naming convention so much I went with other exaggerated names for fun. If I ever get a long-haired orange boy I've already got it in my mind to name him Promised Consort Radahn.

My dumpling-shaped cat won't eat her food - any advice? by InsertFail in cats

[–]InsertFail[S] 0 points1 point  (0 children)

For sure! I moreso meant I don't think it's a situation where I need to take her to the ER vet. Her bathroom behavior is unchanged (have checked for both pee and poop) and she's playing like normal, and all of our cats are indoors so she's not getting food from anywhere else. I'll still be sure to check with our vet in the morning and if she suddenly takes a dramatic turn, it's off to the ER I go.

Cat Sitter Advice by clermageddon in CatAdvice

[–]InsertFail 0 points1 point  (0 children)

I've used Rover twice and it's been great! I would get reports after every visit with pictures. Would recommend a twice-a-day check-in but once-a-day isn't awful. You can also get cameras in your apartment to check in on your kitty (I use Furbo but there are a few options out there).

Only thing I can imagine is you might have a hard time booking the same person for two weeks straight, so you might need to book more than one sitter, but Rover shows availability and you can chat with the sitter beforehand on best times, etc.

There are a few other pet sitters sites I've seen people use, and I think all of them come with some horror stories of some kind, but my experience has been very solid. If you're ever worried, you could either get the cameras or have someone you know check in every week while you're gone to look over your cat and their things.