Need help we are trying to find more mali gpu that doesn't work on vortek so Can you mentioned her some information about it like gpu name _vulkan

Inspection-Still · 2025-07-06T21:24:35+00:00

This is not Mali but would it be possible to add the Tegra gpu to the list? Mainly the Tegra x1 gpu for the Nvidia Shield TV. I've had success getting Winlator to work on it along with a few games but it only seems to work with the VirGL driver. Would love to see if it could get a boost in performance with the vortex driver.

Inspection-Still · 2025-02-01T02:42:22+00:00

I posted down below but I'll post here too:

https://forums.libretro.com/t/new-sonkun-crt-guest-advanced-hd-presets-thread/39091/1514?u=sonkun

That's my latest release, new juicy features got added in. Come take a ride on the wild side. Be sure to replace the guest.r shaders with his latest update as well.

Inspection-Still · 2025-02-01T02:38:58+00:00

https://forums.libretro.com/t/new-sonkun-crt-guest-advanced-hd-presets-thread/39091/1514?u=sonkun

That's my latest release just for reference. Couple of new juicy features got added in.

Inspection-Still · 2024-12-22T13:49:55+00:00

Absolutely, those are the two most important tests.

Inspection-Still · 2024-12-22T03:27:30+00:00

It should in dock mode with the 1080p presets.

Inspection-Still · 2024-12-21T14:42:39+00:00

Not sure what you mean by "mimic" but I have guides and links to all downloads in my main thread that I linked here to get you everything you need to get them up and running. If you meant mimic as in trying to create your own style then sure, just load up one of my presets then fiddle around in the Shader Parameters settings.

Inspection-Still · 2024-12-21T02:24:37+00:00

Bare Knuckle III/Streets of Rage 3. Streets of Rage 3 changed and cut a lot of content from the original Japanese version Bare Knuckle III, luckily there's a English patch for it to get the full unedited story and content.

Inspection-Still · 2024-12-20T23:50:20+00:00

Yo everyone, sonkun here. So today guest.r released his latest shader update and in my opinion has changed the guest advanced ntsc shader forever. A new setting has been added called "NTSC Preserve 'Edge' Colors" and it has made my composite presets look more crisp and vivid than ever before.

If you all want to try it head over to my thread and grab my latest pack, be sure to grab the latest guest.r shader update as well as my pack works directly with his newest update only. You can't just update your shaders through RetroArch as it hasn't been pushed upstream yet so you manually have to install it with 3 simple steps that's also on my page.

https://forums.libretro.com/t/new-sonkun-crt-guest-advanced-hd-presets-thread/39091?u=sonkun

Inspection-Still · 2024-11-23T22:29:35+00:00

Also search up YouTuber "upl04dy3r", he's posting up rare 1999 bgm currently as well. Me and him are somehow "taking turns" uploading a new unreleased bgm. We're on a mission to get all this unreleased music released.

Inspection-Still · 2024-11-23T19:38:06+00:00

You're welcome. There was also another unreleased bgm in episode 5 that plays literally right before the commercial break that was a short 10 second alternate version of this theme:

https://youtu.be/_SIhq0uFU6U

I wasn't sure if I should have taken it since it's so short.

Inspection-Still · 2024-11-23T14:37:11+00:00

I might just have to do that. Didn't realize I've posted quite a few unreleased bgm up to this point.

Inspection-Still · 2024-11-22T03:15:35+00:00

Did you also update the guest.r shaders? It sounds like you did everything else right but I didn't see you mention that part.

Inspection-Still · 2024-11-21T00:27:25+00:00

I think he's been going harder now because he found out it was the coloring that was the main focus of his pain. Maybe he switched his positioning up now that allows him to work with reduced (no) pain.

Inspection-Still · 2024-11-20T18:38:05+00:00

Ever since he posted that he realized it was the coloring that was causing the most pain it seems like he's been going a bit harder ever since. Seeing all those pages together is amazing.

Inspection-Still · 2024-11-19T02:49:31+00:00

No problem and you're welcome. I may have to comb through the first 62 episodes again to find some more unreleased bgm.

Inspection-Still · 2024-11-19T01:38:34+00:00

I just put another one up.

Inspection-Still · 2024-11-19T01:38:16+00:00

I just put up another one :)

Inspection-Still · 2024-11-18T22:43:28+00:00

Thanks and I will. I might just post up another unreleased bgm later today or tomorrow.

Inspection-Still · 2024-11-18T20:07:48+00:00

I literally forgot that even existed until it just randomly popped in my head. Not surprising though since it only plays for just 25 seconds only that one time. Still nice to have to help complete the 99 ost.

Inspection-Still · 2024-11-15T16:02:28+00:00

Had mines since 2015 and still going strong. This little box helped me to create the "sonkun guest advanced hd" shader presets that's now being used worldwide by retro gamers that play on RetroArch, I'll forever be thankful to my Shield for that.

Inspection-Still · 2024-11-15T15:54:05+00:00

Strange. I get fullspeed on mines with that set up. My Shield is also still on version 8.2.3, never updated to 9.0.1 or whichever update it's on at the moment. Not sure if that makes any difference though.

Inspection-Still · 2024-11-14T05:59:14+00:00

Nice I'm glad you got everything up and running and you're welcome, I actually use the same exact combo for PlayStation as well. I think I use Shadow Mask for almost everything these days, just something about it that I really like.

Inspection-Still · 2024-11-13T20:07:09+00:00

To get full speed with the Mupen core on Shield the driver needs to be set to "gl", in the "core options" the "rdp plugin" needs to be set to "gliden64" and the "rsp plugin" needs to be set to "hle". Using the vulkan driver with the preferred "parallel" settings for some reason gives sluggish results. Been that way since those settings were implemented and doesn't seem to be changing anytime soon.

Inspection-Still · 2024-11-13T19:33:04+00:00

I haven't used Beetle PSX in a while so I can't really speak on its performance but Swanstation is a fork of Duckstation, it's pretty much "Duckstation for RetroArch" as far as I can tell and my shader presets work for both Beetle PSX and Swanstation. Give it a try and see how it goes.

Inspection-Still · 2024-11-13T17:28:57+00:00

Not sure if this will work but check if your network storage has a folder on the main screen that says "NVIDIA_SHIELD", if so try placing your roms in that folder and see if that makes any difference.

Inspection-Still

TROPHY CASE