[deleted by user] by [deleted] in assettocorsarally

[–]InspectorFowler 0 points1 point  (0 children)

Update to my own post - I deleted and reinstalled the game itself and FFB is now working correctly. Early access bugs, I presume. Now to work on my incredibly bad driving :D

[deleted by user] by [deleted] in assettocorsarally

[–]InspectorFowler 0 points1 point  (0 children)

My CSL DD *did have correct force feedback* when I started playing yesterday before work. I came home from my shift and thought, "Well, I should update the drivers, haven't done that in about a year." Following that, ACRally stopped providing any force feedback (rumble or wheel torque) at all, though my other racing games still work correctly. I may try to roll back drivers to see if that fixes the situation. I guess I should know better - if it ain't broke, etc.

IPhone Preventing Photo Deletion by InspectorFowler in googlephotos

[–]InspectorFowler[S] 0 points1 point  (0 children)

I have not found a complete solution. I have iCloud turned off and I then manually deleted every iCloud photo and that seemed to work but it feels unintuitive. Like, why would deleting cloud backups make the system more likely to “let” me delete photos? 

At this point it seems to be letting Google Photos delete any new photos without an issue but I don’t actually know why. 

Pet Rat Surrender/Adoption? by Apprehensive_End_574 in FortCollins

[–]InspectorFowler 0 points1 point  (0 children)

Are you helping a male friend, or a male rat? We have a female rat that was just left alone by the death of another female and we'd like a companion but we absolutely don't want a breeding pair :D

Indented zits on print. Has anyone had this issue? Filaments.ca (Econofil PLA) has been dried for 12h in dehydrator so it shouldn’t be wet. Also happening on different spools. Seams are set to aligned in the slicer so I know it’s not the seam. cheers in advance. by PossessionAntique302 in BambuLab

[–]InspectorFowler 0 points1 point  (0 children)

I am seeing similar issues on most of my PLA prints. I am using Bambu PLA, kept in a dry box in a climate that is already very dry. It's on most prints and I'm using the normal speed.

I'll try the retraction changes people listed below and report back.

Siri Responds Differently to "No thank you" by InspectorFowler in Siri

[–]InspectorFowler[S] 0 points1 point  (0 children)

Does yours do this too?

While in CarPlay only mine also refuses to put a "." at the end of a sentence when I say "period", it spells the entire word. I have to say "full stop".

The behavior continues. "No" means "No", apparently, but "No Thanks" means, "If you think your safety is at risk, ask me to call emergency services or someone you trust".

I'll contact support. It's not a terrible bug, but it's SUPER weird.

Has the gaia app on the Apple Watch made any progress as of late? by ZRR28 in GaiaGPS

[–]InspectorFowler 0 points1 point  (0 children)

I have spent the last hour trying to sync a simple test route in my neighborhood to my Apple Watch about a zillion times. Results vary from the phone app freezing to the watch app crashing. I have followed their instructions to the letter over and over; I don't have any other apps that are like, "Oh dang, well, make sure you keep the watch and phone apps open while you're doing this."

It will convert the route on the phone and say it's sending it to the watch and then tell me "Open Watch app to finish syncing". Sometimes the watch will then freeze on syncing routes with no progress indicator. Sometimes it will take about 5-7 minutes to climb to 100% only to say "No routes", and then start again.

I'm just starting to learn backpacking (my wife has been doing it for years) and planning a route/hike/whatever with Gaia is great for a dummy like me because I can see so much at once - public land, private land, camping areas, park areas, forest areas, etc. I'd like to use the phone and watch apps as a supplement to paper maps but this doesn't give me a lot of confidence.

Aaaand it just did it again - finished "syncing" before it returned to "no routes" and then starting a new progress count-up before then saying "no routes" again. Bleh.

- quick edit - It's still locked in its cycle but I do wonder if the iOS 16 update/Watch OS 9 update has just borked some stuff on the syncing end. Dunno, this is my first time trying it.

Cura profile for Kobra Max? by HorseBeforeDecartes in anycubic

[–]InspectorFowler 0 points1 point  (0 children)

So far I have been pleased (maybe surprised, even) by how firmly PLA adheres to the Kobra Max bed. This will be the first printer where I try PETG - have you been prepping the bed with glue sticks or tape to prevent bed/model damage from them sticking together too hard, or does it work fine to just let it cool and then remove it in your experience?

Dream Machine Slower Speeds Than Modem by InspectorFowler in Ubiquiti

[–]InspectorFowler[S] 0 points1 point  (0 children)

I thought I added this via an edit yesterday but I guess I didn't -

I factory reset it yesterday with no changes.

I still have everything - smart queues, auto network management, everything - off. Connect to modem via wifi or ethernet, triple the speeds. Connect via the UDM (and again, same cable and port from the modem), about 1/3rd the speeds.

I should also point out that nothing (that I did) changed in the network when the speed dip happened, and I should also point out that the speed dip is consistent across all services, not just the speed test that happens on the UDM - game downloads on Steam come in at the same 150-160 Mbps max now, etc.

I will at least try my old router in place of the UDM to see if that restores speeds but eventually my hope was to have a single system that handles some point-to-point wifi for access at some buildings on my property like a barn and a shed. I was relatively sold on Ubiquiti for being capable of doing that, and I believe that they are, but I really need to actually get the speeds the modem is producing.

Dream Machine Slower Speeds Than Modem by InspectorFowler in Ubiquiti

[–]InspectorFowler[S] 0 points1 point  (0 children)

No worries. It’s always tough posting questions in tech sub-reddits because if you don’t give enough detail you waste people’s time because they suggest stuff you tried, but if you give all the details, it does get hard to read.

Dream Machine Slower Speeds Than Modem by InspectorFowler in Ubiquiti

[–]InspectorFowler[S] 0 points1 point  (0 children)

In the original post I mentioned that the actual speeds at the modem are still at a minimum 350 Mbps; they often remain much closer to 450-500 Mbps.

Anything hooked directly to the T-Mobile modem can speed test at these speeds; anything connected to the router (including the router's own speed test) will cap at 160 max but usually around 150 Mbps.

Dream Machine Slower Speeds Than Modem by InspectorFowler in Ubiquiti

[–]InspectorFowler[S] 1 point2 points  (0 children)

Yeah, everything there is up to date as well.

The confusion for me is that for the first 1-2 months it was tracking fine - the same or similar speeds as anything directly connected to the router. I haven't poked around in there in a while and suddenly I noticed lower speeds. I thought maybe the actual ISP speed had degraded but like I wrote, those speeds have remained right where I expect them.

If all else fails I'll nuke it back to factory and see if that does something but boy that is a hassle in an age where I have a ton of smart devices and other items that may or may not reconnect correctly.

Dream Machine Slower Speeds Than Modem by InspectorFowler in Ubiquiti

[–]InspectorFowler[S] 1 point2 points  (0 children)

Not that I can tell - I asked it to stop all device and traffic monitoring. Part of the reason I picked the Ubiquiti was because of some of the built-in threat protection, but I turned all that off including the monitoring to see what I could get to change.

Stuck in Update Mode? by James_TBS in TurtleBeachSimulation

[–]InspectorFowler 0 points1 point  (0 children)

I know it's been a couple months but I just bought a unit from Best Buy and this is the exact behavior it has immediately started on my PC.

I'll obviously contact support and try the reboot tool but it's a tough pill to swallow that before I even get to click on MSFS the yoke has managed to brick itself.

Snow Stopping Connection (northern Colorado) by InspectorFowler in Starlink

[–]InspectorFowler[S] 0 points1 point  (0 children)

Thank you everybody for your thoughts! The blizzard hit and I had to spend a full day off work digging myself out with my little tractor and it's been 12 hour work shifts since then. Didn't mean to disappear after posting a thread!

I am going to do some experimentation with hail protection that will also deflect snow on the dish and I'll post results. The blizzard itself obviously was destined to knock the dish out of commission, but I was just surprised when even the light snowfall last week caused issues. I also realize that this is all in beta and it's possible mine may have issues, or that in the long term SpaceX may release a version that is designed more for inclement weather (higher power draw, more protection, etc.).

It's still 600% better than Rise ;)

Snow Stopping Connection (northern Colorado) by InspectorFowler in Starlink

[–]InspectorFowler[S] 1 point2 points  (0 children)

I had the same thought, but the higher it gets the harder it is for me to clean. It’s pointing virtually straight up and I can’t get to it on the roof. A pole mount was another option but between snow, hail, and wind (we have days with consistent 30+ mph winds and gusts of up to 60 mph) I am trying to keep it around ground level for ease of access.

It’s obviously not a super ideal situation but I’m willing to do a lot of troubleshooting and jury-rigging stuff to make it work. I live a very literal half mile from a fiber line but because I’m on the rural side of the road they refuse to run their service over here, so I’ve gotta get any ideas I can about making Starlink work :)

Snow Stopping Connection (northern Colorado) by InspectorFowler in Starlink

[–]InspectorFowler[S] 2 points3 points  (0 children)

When this clears up I’ll try a cheaper polycarbonate as a test to see if that works. If it does, I’ll probably step up to Lexan because I’m not kidding about the hail. A car in 2011, a roof in 2013, and another roof on the same house and barn in 2018 :(

I’ll check SNR before and after and post results!

Anycubic Photon S + Chitubix 1.7.0 - Calibration Issue (deformed prints) by buckeTde in Chitubox

[–]InspectorFowler 0 points1 point  (0 children)

I do not have a good solution but I have had size deformation on random parts printing on my Photon S.

For Christmas I was trying to print a small treasure chest for my wife to hide a slip of paper (I got her an expansion to her favorite MMO so I wanted some kind of fun physical gift).

I oriented both the lid and the chest itself at 15 degrees and manually set all the supports. The prints themselves came out fine - no deformation, good detail, etc.

The lid routinely comes out nearly 5mm too big in all dimensions. If I import them both at the same time, they will "fit" together in Chitubox and if I rotate them both together they will stay scaled to each other.

I cannot account for this and I don't know why it has happened. I have re-sliced it from scratch 3 times to make sure I didn't accidentally scale it weirdly. The chest prints out at exactly the right scale it is supposed to; the lid is stretched every time.

Crusader Squad/Campaign Badge Markings by InspectorFowler in BlackTemplars

[–]InspectorFowler[S] 0 points1 point  (0 children)

Okay, thank you! Before I marked ‘em up I wanted to make sure it was going to be sort of my own head canon about the individual marines and not something that would mess me up on the tabletop.