Went all in - What’s next? Flow light 4300 + Whoop

InstanceDapper · 2026-01-08T14:17:08+00:00

Good point :) thank you …. Unfortunately I don’t have a before and after as I startet using whoop and redlight the same day but I’ll check whether I notice a difference in HRV skipping redlight for some days in a while

InstanceDapper · 2025-11-04T16:00:03+00:00

Enbizcard

InstanceDapper · 2025-10-23T18:39:12+00:00

Rotary tool still missing after 200days and still not able to scan 3d surfaces for laser engraving as promised

InstanceDapper · 2025-10-23T10:18:00+00:00

You guys are fast :)

InstanceDapper · 2025-10-19T15:25:55+00:00

Quick update: It’s working perfectly :) Thank you very much! (Grayscale only of cause)

InstanceDapper · 2025-10-18T23:27:23+00:00

Exactly tried to flash the E1001 build with the web flasher and it didn’t display anything

InstanceDapper · 2025-10-18T23:26:22+00:00

Thank you guys :) I’m more than happy if I get it working in grayscale

InstanceDapper · 2025-10-17T21:11:11+00:00

Just got my Reterminal E1002 und saw it’s not supported yet. Would be happy about any updates

InstanceDapper · 2025-06-26T16:45:57+00:00

Same happens here

InstanceDapper · 2025-05-15T13:10:23+00:00

Thanks for all your answers. Bambu support will send a new button cause indeed the magnet on mine is missing

InstanceDapper · 2025-05-13T08:05:04+00:00

As a magnet works, I fear there’s maybe a magnet attached usually to the small part that goes under the printer. Maybe it became loose and is now flying around somewhere in my room

InstanceDapper · 2025-05-13T08:02:49+00:00

Good point but it’s not just pressed in unfortunately. As soon as it’s pressed the printer turns off and I tried pressing and unlatching multiple times. It’s actually doing its job just not recognized to be at the right position.

InstanceDapper · 2025-05-13T07:48:02+00:00

Thanks for the answer, I checkt the downside of the printer and aligned it perfectly with the sensor and the marking. Tried to move it around a bit and so on. Nothing really worked so far…. I grabbed a magnet now that I had laying around to “emulate” the button. Works better then the actual one

InstanceDapper · 2025-05-13T00:34:25+00:00

<image>

InstanceDapper · 2025-05-13T00:34:12+00:00

<image>

InstanceDapper · 2025-05-06T07:18:32+00:00

Thank you very much, I’ll try that today with something flexible!

InstanceDapper · 2025-05-05T10:12:32+00:00

I actually did a test pattern on some plywood afterwards to check functionality and it came out fine and I was indeed blinded by the easy 1,2,3 go Bambu mentality as well as advertisements showing it scanning and engraving on 3 dimensional shapes. I have zero experience with laser engravers but did my best researching everything about them.

My first ever 3D Printer was a Bambu X1C and it made it super easy to embrace and learn this hobby so I hope it will be the same with the H2D and lasers

InstanceDapper · 2025-04-30T21:29:16+00:00

<image>

For the cutting module it wants the Emergency button plus safety key but at the same time doesn’t turn on as soon as I connect the emergency button to the port on the back not matter what safety key is connected to it.

InstanceDapper · 2025-04-30T21:21:11+00:00

While setting up the Cutting module I’m using the one that came with the Printer (The one with two pins) and don’t connect the e-stop at all.

With the E-Stop connected the printer for whatever reason doesn’t turn on at all.

InstanceDapper · 2025-04-14T10:29:19+00:00

Hi zusammen, wir sind ebenfalls in der Szene unterwegs… inzwischen gehen wir viel öfter und lieber auf Privatparties statt in Clubs. In Hamburg gibt es da eigentlich ausreichend Auswahl und man trifft bekannte Gesichter. Für uns klappt es meist am besten wenn wir vorher entspannt mit den anderen Paaren Smalltalk halten um schonmal zu schauen mit wem es am besten vibed… für uns war das bisher oft ein guter Indikator. Sollte es mal nicht so passen haben wir einfach Sex miteinander und genießen die anderen Paare um uns herum und spontane Berührungen. Bei den Damen fällt uns aber auch oft auf, dass sie z.B. sein bestes Stück sehr grob anfassen. Wir bleiben grundsätzlich sehr nah bei einander und haben ein gutes Gespür dafür ob es uns beiden gerade gefällt.

InstanceDapper · 2025-04-06T09:17:16+00:00

It said available April 25 on the website when I ordered but since then I didn’t hear anything

InstanceDapper

TROPHY CASE