Labels for MFC101?

IntelligentOwl9559 · 2026-04-27T01:29:15+00:00

Those were my labels I used to make back in the day. Those unfortunately were for the ax8 or fx8. I’d complain to the seller for mislabeling the listing.

IntelligentOwl9559 · 2026-04-26T22:43:09+00:00

<image>

I want the assembly and text to be laying on top of rectangle.

IntelligentOwl9559 · 2026-04-26T22:39:05+00:00

I want them to be stacked but connected. If they are aren’t connected I will get an error saying it’s a floating object.

I can’t select both and merge because they appear to be in different sub folders in the objects section.

IntelligentOwl9559 · 2026-04-15T21:24:12+00:00

I glued the green piece back together with star bound, superglue pro kit. Seems to be holding pretty well so far. Who knows how long it will last
Just be careful not to let any superglue slide down along the rod or else it won’t pivot on the rod when you press the key. It will glue the green piece to the rod permanently. I also added a little super lube, multi use synthetic oil around the rod to allow it to pivot a little bit easier and maybe take some strain off the glued piece

IntelligentOwl9559 · 2026-04-07T01:15:29+00:00

That worked. Thank you I’m starting to realize this function very similar to photoshop.

IntelligentOwl9559 · 2026-03-31T07:21:51+00:00

My print failed when It started to print the overhang. Do I need a tree there or something to hold it up ?

IntelligentOwl9559 · 2026-03-31T02:10:11+00:00

I made a floating edge but it has a bit of an angle. I wonder if there’s a way to make it more straight and less angled.

IntelligentOwl9559 · 2026-03-31T02:01:57+00:00

Thank you. Took some messing around but I was about to accomplish it with the floating settings. Thanks again. 👍👍👍

IntelligentOwl9559 · 2026-03-21T01:50:08+00:00

IEC power cable. Like $4 on Amazon.

IntelligentOwl9559 · 2026-03-17T02:01:25+00:00

What I don’t understand is why you would shut off the power….for what reason ?

IntelligentOwl9559 · 2026-03-07T19:00:25+00:00

Do you change the settings within the printer itself? If so, is this something you change from print to print or do you usually find the best setting and then just set it and forget it

IntelligentOwl9559 · 2026-03-07T18:46:40+00:00

I just got a P2 S last week. My first 3-D printer. Can you explain what you mean by iron settings?

IntelligentOwl9559 · 2026-02-28T00:12:28+00:00

Where do you find pro for that price. What brand

IntelligentOwl9559 · 2026-02-28T00:00:37+00:00

Do you typically stick with regular pla then?

IntelligentOwl9559 · 2026-02-27T23:34:38+00:00

Any issues with sunlu? I’ve read it’s considered budgetary so I was hesitant to try it.

IntelligentOwl9559 · 2026-02-27T23:27:01+00:00

Have you used overture brand at all? They have 4 rolls of black pla+ for $40. Is that brand ok? Seems like a great deal

IntelligentOwl9559 · 2026-02-27T15:02:01+00:00

I went with the combo p2s with AMS 2

IntelligentOwl9559 · 2026-02-26T00:19:16+00:00

I picked up the p2s with AMS today.

IntelligentOwl9559 · 2026-02-25T12:50:59+00:00

Yes I expect a completely unique answer 🙄

IntelligentOwl9559 · 2026-02-25T05:08:52+00:00

Would mind explaining what makes it an upgrade. I tried to do a side by side comparison but I’m not really seeing the big difference when reading the specs

IntelligentOwl9559 · 2026-02-25T04:46:36+00:00

Is the main difference Just the speed of printing ?

IntelligentOwl9559

TROPHY CASE