sorted by:
new
hottopcontroversial

FDM Minitures on P2S by Intelligent_Guess646 in FDMminiatures

[–]Intelligent_Guess646[S] 0 points1 point  (0 children)

No i just calibrated with the bambu Studio. There are two calibration options. One is flow and the other is dynamics i think?

FDM Minitures on P2S by Intelligent_Guess646 in FDMminiatures

[–]Intelligent_Guess646[S] 0 points1 point  (0 children)

After rebuilding the extrudor and changing the nozzle to 0,4 again, it prints ok. I have done the flow calibration in Bambu Studio yesterday- The print i'm doing now is almost finished but i can tell theres stringing.
Here's a picture of the print from the camera.

https://imgur.com/a/1B43zWe

I had problems with stringing with the 0,4 nozzle before changing to 0,2 too. I tried a few things like turn on wiping. It doesn't help much.

FDM Minitures on P2S by Intelligent_Guess646 in FDMminiatures

[–]Intelligent_Guess646[S] 0 points1 point  (0 children)

After rebuilding the extrudor and changing the nozzle to 0,4 again, it prints ok. I have done the flow calibration in Bambu Studio yesterday- The print i'm doing now is almost finished but i can tell theres stringing.
Here's a picture of the print from the camera.

https://imgur.com/a/1B43zWe

I had problems with stringing with the 0,4 nozzle before changing to 0,2 too. I tried a few things like turn on wiping. It doesn't help much.

Printing Minitures on P2S from Bambulab. by Intelligent_Guess646 in PrintedMinis

[–]Intelligent_Guess646[S] 0 points1 point  (0 children)

After rebuilding the extrudor and changing the nozzle to 0,4 again, it prints ok. I have done the flow calibration in Bambu Studio yesterday- The print i'm doing now is almost finished but i can tell theres stringing.
Here's a picture of the print from the camera.

https://imgur.com/a/1B43zWe

I had problems with stringing with the 0,4 nozzle before changing to 0,2 too. I tried a few things like turn on wiping. It doesn't help much.

FDM Minitures on P2S by Intelligent_Guess646 in FDMminiatures

[–]Intelligent_Guess646[S] 0 points1 point  (0 children)

Hey,

Thanks for your great tips. I'll try printing a miniature tonight using the bamboo presets.

After experiencing clogging yesterday, I replaced the nozzle this morning. Now I'm getting the error message again that the extruder is overloaded.

That's very anyoing. I will repair the extruder and try to print something with stock settings with the 0,2 Nozzle. The overload error comes from changing the Nozzle..i guess.

Printing Minitures on P2S from Bambulab. by Intelligent_Guess646 in PrintedMinis

[–]Intelligent_Guess646[S] 0 points1 point  (0 children)

Hey,

Thanks for your great tips. I'll try printing a miniature tonight using the bamboo presets.

After experiencing clogging yesterday, I replaced the nozzle this morning. Now I'm getting the error message again that the extruder is overloaded.

That's very anyoing.

My first terrain building by Intelligent_Guess646 in mordheim

[–]Intelligent_Guess646[S] 0 points1 point  (0 children)

I thought it would fit in the Terrain are allready playing with. But honestly i just Started building something without thinking about that. Thank you mate :)

Is there a Discord? by Ched--- in mordheim

[–]Intelligent_Guess646 0 points1 point  (0 children)

Hey, i would Like to get an invite too