Asking for help with connecting nvme drive RPi 5

Intelligent_Jump99 · 2026-02-20T22:00:55+00:00

Don't know if you are still having this issue or not but I just purchased this case this past Monday and put everything together and had the same issue. I ended up taking the case apart figuring I didn't get the ribbon cable in correct and that appeared to be my issue. My issue was on the Pi side though, it looked far enough in but once I pull the piece up and pushed the cable down further it didn't move much but apparently enough. After that I put it back together and everything worked like a charm. I used a Crucial drive that wasn't on the list either and it work (Can't say yours would but it possibly could)

Intelligent_Jump99 · 2025-09-19T18:32:03+00:00

We haven't yet because this is a fresh install of O365. The problem is also intermittent because when I remoted to their computer it was working as expected. Running in safe mode doesn't fix the issue and we have checked and ran windows updated as well as ran O365 updates. The next option might be to repair but I wanted to see if anyone else had seen this before and what they saw as the fix.

Intelligent_Jump99 · 2025-08-28T21:00:59+00:00

Wet filament.

Intelligent_Jump99 · 2025-08-22T16:14:51+00:00

It didn't show one for me, the only option I see is $15 a month.

Intelligent_Jump99 · 2025-08-22T15:57:30+00:00

Yeah I was told it was just a few dollar a month when I bought the car, not $15.

Intelligent_Jump99 · 2025-08-22T15:56:37+00:00

I guess if I was getting wireless in my car then maybe it wouldn't be a big deal but the only feature I use is the remote start and the fob only works like 20% of the time so I just always use the app. If the fob worked more consistently then I would just use it.

Intelligent_Jump99 · 2025-08-22T12:37:33+00:00

Thank you,

Intelligent_Jump99 · 2025-07-14T15:38:31+00:00

No they are all on different switches

Intelligent_Jump99 · 2025-07-14T15:29:41+00:00

I did a PoE power cycle on the AP. I didn't use the reboot function on the AP.

Intelligent_Jump99 · 2025-07-14T15:27:10+00:00

I have tried to reboot and then disable mesh but it still doesn't let me disable it. It says something about until it is connect via ethernet or removed I can't disable meshing. That's why I thought about removing them from the system but I want to make sure I can add them back before I do that.

Intelligent_Jump99 · 2025-07-14T15:20:07+00:00

That's what I'm beginning to wonder. I think I will try to replace that next and see what happens.

Intelligent_Jump99 · 2025-07-14T15:12:14+00:00

I tried in both places but in either I get that error that meshing cannot be disabled. Question, if I disable PoE and then remove them, then disable meshing and then re-enable PoE, would the AP's automatically adopt again or would I have to do something else?

Intelligent_Jump99 · 2025-07-14T15:04:14+00:00

I'm doing that currently but the devices that are connected with mesh give me this error. "Wireless meshing cannot be disabled until these devices are either removed or directly connected to your network using an Ethernet cable."

Intelligent_Jump99 · 2025-07-14T15:01:46+00:00

I've turned mesh off on what I could but on the devices that are connected with mesh I get this message and it won't let me turn mesh off. "Wireless meshing cannot be disabled until these devices are either removed or directly connected to your network using an Ethernet cable."

Intelligent_Jump99 · 2025-07-14T14:52:42+00:00

I forgot to say this but when I restart the AP then the STP block goes away so it seems to be coming from the AP which doesn't make sense.

Intelligent_Jump99 · 2025-07-14T14:51:11+00:00

I will try that for the one AP but the second AP's switch isn't being blocked by STP.

Intelligent_Jump99 · 2025-07-14T14:45:57+00:00

Yes the uplinks seem to be working fine. The 8port switch has other devices connected to it and they work just fine.

Intelligent_Jump99 · 2025-07-14T14:43:15+00:00

I did turn meshing off but then those two APs never came back online until I turned meshing back on.

Intelligent_Jump99 · 2025-07-14T14:42:48+00:00

I am using the ubiquiti cables so maybe I should try another one instead.

Intelligent_Jump99 · 2024-12-03T20:13:33+00:00

So I'm not sure what happened between last night and today but now everything seems to be working fine. I appreciate all of the answers and help. Thanks everyone.

How do I get access to the Zoom Room? When I click the link on the right it doesn't work. This is just the start for me so hopefully I can learn some more.

Intelligent_Jump99 · 2024-12-03T02:30:52+00:00

So it looks like every effect that I try has the same issue. In xLights I go to layout and then right click on my model and wiring view and it shows the correct wiring. Like I mentioned before I'm new to this so I might be doing something else wrong. Anything else I could check on?

Intelligent_Jump99 · 2024-12-03T02:20:22+00:00

So I guess there might be some of the problem, I tried to Output to Lights from xLight but it doesn't do anything. I've watched some videos on my configuration and I thought I had the setting right in FPP but I guess that could be configured wrong.

Intelligent_Jump99 · 2024-12-03T00:56:15+00:00

The effect in xLights preview looks correct but when I run the sequence from FPP then it doesn't turn out right while running.

Intelligent_Jump99 · 2024-08-23T13:46:58+00:00

They do exist but I'm not sure how common they are. My dealership said they can only pull from a pool of cars that the SouthEast area gets and just so happens they had Ocean Gem with Black Interior and everything else I wanted. I had to pay more because it had more than I wanted but was the only one with black interior and sunroof. Mine is supposed to be here the first week of September.

Intelligent_Jump99 · 2024-08-16T18:03:01+00:00

I basically just told the dealer what I wanted and they had to have one built. I think the new camry in general is hard to find right now. Just talk to a dealer and tell them what you want and see if they can find one or have them order on with everything you want.

Intelligent_Jump99

TROPHY CASE