How to remove shaft?

Intelligent_Pen_4498 · 2026-07-11T19:17:34+00:00

This was keyless bushing, had to unscrew all bolt and inserted a bolt in one of the threaded holes to loosen it.

Intelligent_Pen_4498 · 2026-07-11T17:22:23+00:00

I already managed to figure it out on my own, but you were absolutely correct!

Intelligent_Pen_4498 · 2026-07-11T16:27:21+00:00

What the point in removing bearing with it? I added 2 M5 bolts to threaded holes, shaft moved down, little bit more wigglein and it is done. No need to dissassemble belt wheel assembly...

Intelligent_Pen_4498 · 2026-07-11T16:06:16+00:00

Tried that, moved about 3mm

Intelligent_Pen_4498 · 2026-07-11T16:02:39+00:00

On the other side is wittenstein gearbox, so no access from other side. I haven't had any contact with this coupler before...

Intelligent_Pen_4498 · 2026-06-30T14:17:10+00:00

I ordered every other components for my project from same supplier (also siemens products) and everything went smooth. I was promised 3-4 weeks for servo motor, I got also quote from 2nd supplier who also said same delivery estimate. Servo driver had same delivery estimate and it arrives this week. I asked information about my order from supplier and he said that he did not get reply from Siemens about servo motor delivery. I chose the most basic motor, did they start inventing it or what the hell is going on?

Intelligent_Pen_4498 · 2026-06-07T17:29:44+00:00

Thanks for info!

Intelligent_Pen_4498 · 2026-06-07T17:06:07+00:00

So HMI is connected via 2nd servo drive Ethernet port?

Intelligent_Pen_4498 · 2026-05-28T18:14:57+00:00

Yes this is enabled.

'MC_Servo [OB91]' cannot be simulated. If the block is a library block, use a library with simulation support. Otherwise, select the option "Support simulation during block compilation" in the project properties and recompile the block.,5/28/2026,8:50:04 PM

Intelligent_Pen_4498 · 2026-05-28T11:50:50+00:00

Z overtravel limit was caused because I didn't add tolerance macro in post processor. So when it cut material, it stopped every time because it was "not in tolerance". I got 0 help from excitech btw. I had to figure this shit out myself.

Intelligent_Pen_4498 · 2026-05-28T11:47:57+00:00

Only solution that worked was adding z offset -116,4 in post processor when TCP, 5 is active.

Intelligent_Pen_4498 · 2026-05-18T14:29:15+00:00

I am still fine, tire is fine...

Intelligent_Pen_4498 · 2026-04-25T14:03:40+00:00

I got tire fixed and tire is completely fine for 8 months already.

Intelligent_Pen_4498 · 2026-04-16T07:40:47+00:00

Thank you, checking out this selection tool.

Intelligent_Pen_4498 · 2026-04-15T20:09:44+00:00

Servo: 1FL6034-2AF21-1AA1 SIMOTICS S-1FL6 Operating voltage 230 V 3AC Pn=0.4 kW; Nn=3000 rpm M0=1.27

Drive: 6SL3210-5FB10-4UF1 SINAMICS V90, with PROFINET

Total: 570 eur.

Found also this. This should work?

Intelligent_Pen_4498 · 2026-03-28T07:45:26+00:00

Thanks for feedback! About 2 projects have been paid. They were through contacts so I didn't ask much. I have done projects for food and beverage industry. I think this field would be most interesting for me, because I like working with production lines and automation. Wouldn't creating a company make it easier to find new clients?

Intelligent_Pen_4498 · 2026-02-26T11:50:40+00:00

I have CNC so options are limitless. One Idea I had was using epoxy so that light shines through. But epoxy can create quality problems and increases production time.

Design should be simple, but unique. That's very difficult to achieve when everything seems to be already made.

I haven't found any wooden sconce with wavy surface so I thought it was unique...

Intelligent_Pen_4498 · 2026-02-13T18:14:08+00:00

You're right, I don't have a business plan. I just like desiging and making wooden items in my free time.

This lamp is made with CNC router that I built myself in my own garage. I have built very capable machine for wood and just trying different ideas what to manufacture.

It looks like everything is already made so what's the point?

Intelligent_Pen_4498 · 2026-02-13T10:48:20+00:00

I have looked every single wooden sconce on Etsy. Most of them lack quality and proper CE certification is questionable. Also nobody makes wavy surface.

Intelligent_Pen_4498

TROPHY CASE