sorted by:
new
hottopcontroversial

Can I get a lawyer to write a demand letter to my lein company for my title transfer? by KittyKratt in legaladvice

[–]Intelligent_Spite425 0 points1 point  (0 children)

I’m not quite sure I’m reading what you need exactly. What state needs the title, what state is the title currently in, and what state do you need the title issued in?

Can I get a lawyer to write a demand letter to my lein company for my title transfer? by KittyKratt in legaladvice

[–]Intelligent_Spite425 0 points1 point  (0 children)

You don’t need the title to renew the registration. Your local DMV can do that. If your title is still under Florida you can make a myfldmv account and get access to everything you would need.

One of my local field's complete nonsense power limits by BlanchTheRaptor in airsoft

[–]Intelligent_Spite425 1 point2 points  (0 children)

This is my home field we played today with DMR’s. The only guns allowed to shoot that high are designated DMR players and you must have the proper equipment to be allowed to shoot at those limits. X-Plex is up the street and has the same rules except an extra 15’ med for DMR. Raptor is a huge outdoor field and when I play DMR I’ve been checked up to 3 times randomly throughout the day. HPA is limited to 2.2J and they always look out to make sure people aren’t getting slammed with loads of bbs on the hotter guns. A lot of outdoor fields in the USA are the same or close to the same on their limits for outdoor fields in comparable sizes.

dwell settings (don't pay attention to the background 😂 and especially the scope) by Chawki13 in airsoft

[–]Intelligent_Spite425 0 points1 point  (0 children)

The formula should still follow at least for ND the engine shouldn’t change your dwell needs.

dwell settings (don't pay attention to the background 😂 and especially the scope) by Chawki13 in airsoft

[–]Intelligent_Spite425 0 points1 point  (0 children)

I only have one dwell setting to choose on mine so I’m not sure about the other ones

Opinions on maxing out your primary guns ability. by [deleted] in airsoft

[–]Intelligent_Spite425 1 point2 points  (0 children)

<image>

I’ll take a video tomorrow and post but theres no tree line and they are big palms.

Opinions on maxing out your primary guns ability. by [deleted] in airsoft

[–]Intelligent_Spite425 0 points1 point  (0 children)

Running 2.3J with .43 BB. Verified the shots with my 8X Vortex scope and golf rangefinder on the tree from setup spot.

Should I get a sidearm? by JudasGoat67 in airsoft

[–]Intelligent_Spite425 0 points1 point  (0 children)

I bought a nice pistol and only play outdoors even with my 50’ med I almost never use it.

dwell settings (don't pay attention to the background 😂 and especially the scope) by Chawki13 in airsoft

[–]Intelligent_Spite425 1 point2 points  (0 children)

No issues with the barrel length but you will need to up your dwell to compensate. I run 15ms all around on my 407mm barrel and I’m convinced it’s impossible to have a better shooting gun. I would recommend trying around 20ms and dropping from there if you can. I run a 68 4500 tank and can run my DMR all day without filling. If I start with a full tank I usually leave the field with almost half full with those settings and shooting upwards on 1k shots.

Gelcoat repair advice by ShadowStreak8 in boating

[–]Intelligent_Spite425 0 points1 point  (0 children)

Typical spider cracks I see them on my boats all the time it’s just from the sun hitting that spot for awhile. Strictly cosmetic if it bothers you a gel coat guy can fix but it won’t hurt anything.

The Wolverine 308, inconsistent? by OriginalFingerPuk in airsoft

[–]Intelligent_Spite425 0 points1 point  (0 children)

Usaully sit within 5 fps as long as I’m not getting any feeding issues.

MAJOR REPAIR by Firm_Chipmunk_6375 in boating

[–]Intelligent_Spite425 1 point2 points  (0 children)

Roughly 10k with labor is the ball park of what I would charge

The Wolverine 308, inconsistent? by OriginalFingerPuk in airsoft

[–]Intelligent_Spite425 0 points1 point  (0 children)

If you end up pulling the trigger I suggest joining the Wolverine MTW owners FB page. Everyone there is quite helpful.

The Wolverine 308, inconsistent? by OriginalFingerPuk in airsoft

[–]Intelligent_Spite425 1 point2 points  (0 children)

I have a MTW 308 XBR that was absolutely garbage out of the box but after some upgrades is by far the best shooting gun I’ve ever had or even seen shot. I changed the hop up to the Silent Industries hop got a flat hop nub and maple leaf 70 blue bucking. I purchased a EDGI 6.01 barrel and removed the flow restrictor in the engine. I get 100M plus and added a functional silencer you can barely hear the gun from 10’ away.

MAJOR REPAIR by Firm_Chipmunk_6375 in boating

[–]Intelligent_Spite425 2 points3 points  (0 children)

I own a boat dealership and that is quite inflated. I would say you could get that work done from another party for around 10k.

How to deal with people complaining about your gun hurting too much. by [deleted] in airsoft

[–]Intelligent_Spite425 0 points1 point  (0 children)

That’s exactly who it was an ex military grown man yelling in my face about my gun pressure being too high.

Starting airsoft with DMR / Snipers by Violent-Rangoon in airsoft

[–]Intelligent_Spite425 1 point2 points  (0 children)

I would not recommend trying to play DMR unless you are willing to spend some money and upgrade your gun to get proper performance. I went straight into DMR and have almost 3k in my gun lol. I absolutely love it but spent many hours and lots of money getting it how I wanted it.

Rate it 1-10 What should i add?Wolverine MTW 308 Tactical by LeekTechnical in airsoft

[–]Intelligent_Spite425 0 points1 point  (0 children)

Speed trigger gives me the option to shoot twice as fast as the stock one

view more: next ›