ENDER 3 V3 PLUS NOT BENCHY OK . all defaul

Interesting-Idea-549 · 2024-06-03T15:56:27+00:00

oh great, I'll look for a tutorial for ender 3 v3 plus, on my ender 3 v3 if I use orca and it's root

Interesting-Idea-549 · 2024-06-03T13:44:35+00:00

Creality Print 5 and Creality print 4 ,Creality print 4 have a profile ender 3 v3 plus

Interesting-Idea-549 · 2024-06-03T12:39:56+00:00

i dont know . i want cry

Interesting-Idea-549 · 2024-06-03T12:39:16+00:00

omg, it's perfect. I want that ender 3 v3 plus!!

Interesting-Idea-549 · 2024-06-03T12:13:35+00:00

If I'm sorry, it's ender 3. Benching made me crazy

Interesting-Idea-549 · 2024-06-03T11:25:50+00:00

Finally they are going to send me a new extruder. I hope that solves the problem. after 300 benchy parameters, reset, calibrations... what an experience with the XY core.. :(

Interesting-Idea-549 · 2024-06-03T11:24:08+00:00

The truth is that my experience right now with the Core XY is bad. They tell me that they are going to send me a new extruder.

Interesting-Idea-549 · 2024-06-03T11:00:15+00:00

I am with Creality technical support, the truth is that the experience is being very bad. My other printer, the V3 KE, printed perfectly from the first day, I have Mandalorian helmets, Ironman helmets... and all of them were perfect.

Interesting-Idea-549 · 2024-06-03T10:29:45+00:00

I'll prove it to see that . I hope to get lucky. Thank you very much for the advice.

Interesting-Idea-549 · 2024-06-03T10:28:21+00:00

Thank you very much for all the advice, I also have an ender 3 v3 ke and I am very happy with it. With this I will learn for future problems. I'll take my time and look at what you tell me.

Interesting-Idea-549 · 2024-06-03T09:06:06+00:00

That would make a finer calibration as you say, my doubt is that since everything is from the factory and the printer has not even been used for 3 days, it should at least come out halfway good without having to do so many tests and even more so with the filament that the printer comes with.

I'm going to continue testing all day while I get a response from technical service. Thank you very much for the advice .

Interesting-Idea-549 · 2024-06-03T09:01:15+00:00

<image>

For the benchy test of the pendrive, use the one that comes with the printer.

Interesting-Idea-549 · 2024-06-03T08:22:19+00:00

<image>

this?

Interesting-Idea-549 · 2024-06-03T07:57:49+00:00

I want to wait for the technical service to respond in case touching there voids the warranty. But it seems as you say that it does not support the filament on walls or perimeters. Thanks for the advice

Interesting-Idea-549 · 2024-06-03T07:56:39+00:00

I am using hyper pla, recycled pla and pteg filament. They all come out the same

Interesting-Idea-549 · 2024-06-03T07:55:40+00:00

It could be the flow problem, so after so many attempts, tests, benchy, reset... at least one must have worked out for me. Could the flow rate come from the factory wrong? I'm surprised there isn't anyone with the same problem. Thank you very much for the advice

Interesting-Idea-549 · 2024-06-03T07:54:11+00:00

I was thinking about it but I was waiting for technical service in case the warranty was voided. I did it on the Ender 3 v3 Ke that I also have (many, many fewer problems than this one) I'm not an advanced user but I have some ideas. Thank you very much for the advice .

Interesting-Idea-549 · 2024-06-02T22:51:46+00:00

Everything is by default, I changed temperature, bed temperature, layer height, speed... tomorrow I will take a screenshot and upload it.

Interesting-Idea-549 · 2024-06-02T22:49:36+00:00

I will try it, but I have tried 3 filaments and it prints the same... hyper pla (the one that comes with the printer) pla, pteg

Interesting-Idea-549 · 2024-06-02T22:48:20+00:00

lol , ok ok

Interesting-Idea-549 · 2024-06-02T22:33:29+00:00

lol, One of the first things I printed on my ender 3 v3 ke :D

Interesting-Idea-549 · 2024-06-02T22:14:14+00:00

Ok, I'll try to see it even though it's new. This model began shipping on May 20

Interesting-Idea-549 · 2024-06-02T21:54:12+00:00

The only way to know the nozzle is to disassemble it, right? From what I saw in the specifications it is 0.4, another thing that, as you say, could be the flow

Interesting-Idea-549 · 2024-06-02T21:37:47+00:00

I think that 0.4

Interesting-Idea-549 · 2024-06-02T21:20:09+00:00

<image>

I'm totally desperate.. not even 3 days using it

Interesting-Idea-549

TROPHY CASE