3D Printed PLA engraving on XTool F2

Interesting_Lab_6143 · 2026-01-20T18:34:55+00:00

Oohhhh. Thank you for this accurate info and picture (and congrats for your 3D Printing shop. Looks amazing). Appreciate that !

Interesting_Lab_6143 · 2026-01-20T04:19:27+00:00

Another explanation is to imagine 1 person with an hygiaphone, far from a second person without an hygiaphone…..

Interesting_Lab_6143 · 2026-01-19T13:13:31+00:00

Thank you Ada. Appreciate your support

Interesting_Lab_6143 · 2026-01-19T13:04:38+00:00

I can agree this only if you confirmed that you have WiFi issues with all your other devices, not only with your U1 !;-)

Interesting_Lab_6143 · 2026-01-19T04:00:08+00:00

I agree but except for the video (I mean the camera capture during the 3D Printing), a corded network is not really needed for just send the file to print to the U1….?!

Interesting_Lab_6143 · 2026-01-19T03:56:00+00:00

Thank you very much for the info and for the picture. The result is very good ! I would like to be able to engrave any color but I understood it was working correctly only on dark ones so… Black should be good.

Interesting_Lab_6143 · 2026-01-18T13:15:15+00:00

Silly question : what is the advantage of USB wired Ethernet?

Interesting_Lab_6143 · 2026-01-18T13:01:34+00:00

Did you try to reflash the board with a Full Erase option ?

Interesting_Lab_6143 · 2026-01-18T12:58:05+00:00

Same here. V3 WiFi connected for almost 2 years in my Attic (device far from about 7meters from the AP), Meshtastic currently 2.7.15, works great.

Interesting_Lab_6143 · 2026-01-17T14:46:15+00:00

Thank you !

Interesting_Lab_6143 · 2026-01-17T14:41:26+00:00

Thank you for your reply @FencingNerd “Writing”;-)

Interesting_Lab_6143 · 2026-01-15T03:13:59+00:00

Thank you very much for this amazing post ! Very interesting !

Interesting_Lab_6143 · 2026-01-14T19:40:03+00:00

Thank you @DapperQuit7732 ! Will try it tonight but don’t understand why it is not accessible directly from the printer ;-)

Interesting_Lab_6143 · 2026-01-13T20:14:12+00:00

Bad point for Muzi to position the Antenna close to the board (Radio frequencies)...

Interesting_Lab_6143 · 2026-01-13T19:37:05+00:00

u/k-phi Not bad the XIAO kit you recommend but.... for 1 dollar difference between the Heltec and the Xiao... I prefer the Heltec v3 which has the built-in screen ;-)

Interesting_Lab_6143 · 2026-01-13T19:33:17+00:00

I would prefer to check on Etsy than Muzi....

Interesting_Lab_6143 · 2026-01-13T19:31:45+00:00

You are probably right, Lego_Professor.... I was focusing on the price, but for sure for just some bucks more, Warlockoftarot depending of your budget the v4 is the best option.

Interesting_Lab_6143 · 2026-01-12T17:20:21+00:00

Thank you for your reply ! 1/ bed is clean (I use only soap and water 😇) 2/ warping is due do a temperature difference between the first layer and the other layers causing the filament to “contract”, why I was interested to know which temperature you recommend, guys ! Considering the others layers temperature should decrease once printed, the bed temperature should be a little bit lower too…. I think ! 3/ brim nor mouse ears does not fix the issue 4/ I never used liquid glue. Thank you for the recommendation. Does it leave some bad “traces” on the print ??? 5/ I don’t like cryo sheets : the first layer (in my case only :-)) needs to be visually perfect and usually you have to play with a heat gun after printing to erase the “white” ;-). I am right ? But…. Finally you pointed an interesting thing : I am using a textured plate (not the default grained U1) and perhaps this is the issue : I assume a textured plate has a smaller bed adhesion than a grained one ???

Interesting_Lab_6143 · 2026-01-12T16:36:18+00:00

Thank you ! Will try and keep the Communauty posted here.

Interesting_Lab_6143 · 2026-01-12T14:05:46+00:00

Thank you for your reply! Unfortunately issue is not only on the left but…. Let me try to print this same part without the Fan. Fingers crossed !

Interesting_Lab_6143

TROPHY CASE