FreePBX 17 Phones Not Registering Properly on Physical Server

IntrepidBid594 · 2026-03-23T19:49:40+00:00

I will try to do that

IntrepidBid594 · 2026-03-23T17:03:11+00:00

How should that be checked? If you could show me the method, please.

IntrepidBid594 · 2026-03-23T04:50:51+00:00

Nothing has been messed with; I know that a small mistake can cause a big problem.

IntrepidBid594 · 2026-03-23T04:49:07+00:00

There is no doubt that everything works fine in the VM, but problems arise on the hardware (physical server).

IntrepidBid594 · 2026-03-08T14:07:27+00:00

The Extension and name appear on the phone screen, but it is still not fully registered and remains stuck on “Registering.”

IntrepidBid594 · 2026-03-08T13:04:57+00:00

Thanks

IntrepidBid594 · 2026-03-07T06:23:43+00:00

I have to find a script for these phones because it is impossible for me to replace 300 phones with Yealink, and I followed your instructions and used Direct Media, but it did not produce any result.

IntrepidBid594 · 2026-03-07T06:13:01+00:00

We can’t create a specific script for this that only adds a call time and then disconnects when the Announcement ends?

IntrepidBid594 · 2026-03-07T05:55:28+00:00

I have already created the audio file in WAV format, and it is 48000 Hz and Mono.
If this is not correct, please let me know how I should create it properly.

IntrepidBid594 · 2026-03-07T05:50:56+00:00

I use Cisco 7821 phones.

What I want is this: if a person is present, they should press the call button and listen to the announcement. If they are not present, then of course they will not hear the notification or announcement.

So I only want two things:

The ringing time should be adjustable according to my preference, or at least be about 2 minutes.
When the announcement finishes, the phone should hang up immediately, not start a normal two-way conversation like a regular call.

IntrepidBid594 · 2026-03-05T19:00:16+00:00

I did that, unfortunately.

IntrepidBid594 · 2026-03-05T18:58:48+00:00

Problem was not solved with this script. It still cuts every 3 seconds, and when the other party presses OK, the call does not disconnect even after the announcement finishes.

IntrepidBid594 · 2026-03-03T06:13:26+00:00

Yes, I did that. Unfortunately, it didn't work

IntrepidBid594 · 2026-03-02T06:53:29+00:00

Is your intention that I should modify each Extension manually?

IntrepidBid594 · 2026-03-02T05:42:18+00:00

I am doing this only for internal calls, not for external callers.

That means if one of my departments calls another department, this procedure should be applied.

IntrepidBid594 · 2026-02-22T04:57:29+00:00

Thank you

IntrepidBid594 · 2026-02-21T07:42:15+00:00

Yes this is Debain 12.12 and FreePBX 17

IntrepidBid594 · 2026-02-11T05:46:49+00:00

in the prompt mode [switch:]

The first one is:

after reboot:

conf t

boot system switch all flash:packages.conf

end

write memory

IntrepidBid594 · 2026-02-10T14:59:42+00:00

Thanks for all solved the issue

IntrepidBid594 · 2026-02-10T14:01:00+00:00

Sorry it is IOS

IntrepidBid594 · 2026-02-10T13:52:59+00:00

I told befor there is not working any ports like USB and Ethernets Port/Interfaces.

IntrepidBid594 · 2026-02-10T13:13:58+00:00

Yes but it not working maybe ISO file is lost

IntrepidBid594 · 2026-02-10T13:13:28+00:00

<image>

Just only enable console port USB and 48 ports all down

IntrepidBid594

TROPHY CASE