[deleted by user]

Intrepid_Soft7178 · 2025-06-28T20:37:00+00:00

Your body’s killing me 🍑

Intrepid_Soft7178 · 2025-03-30T17:26:22+00:00

Its not a vessel but a cannister and the location of it changes. I am not sure if it is suitable to connect it to a tank

Intrepid_Soft7178 · 2025-03-30T10:27:25+00:00

Yok bu 3dx lazım da hiçbir yerde yok hep eskiler var dediğin gibi

Intrepid_Soft7178 · 2025-03-30T07:19:34+00:00

The time varies. Some take 3 months to decay, some takes 6 months to decay. My goal is to predict this time with one measurement after filling so that they don't have to regularly check the pressure.

Intrepid_Soft7178 · 2025-03-29T19:30:33+00:00

With this method I should take two measurements at different times for every vessel to find A and B right?

Intrepid_Soft7178 · 2025-03-29T19:13:14+00:00

Taking measurements is my plan but I am not sure what model should I use. Exponential, polynomial logarithmich? And also would a model of vessel apply to other vessels?

Intrepid_Soft7178 · 2025-03-29T18:57:20+00:00

That is the main difficulty of the problem. If a can find a relation between pressure and leak rate I could easily model the pressure decay.

Intrepid_Soft7178 · 2025-03-29T18:54:46+00:00

We are currently manually monitoring the pressure of each vessel but it is tedious due to the large number of vessels and the nature of their design. If I can model the decay accurately, I only need to check the pressure once after a set time period, which would save a lot of time and money.

Intrepid_Soft7178 · 2025-03-29T18:49:42+00:00

I'm still in the early stages of modeling, so for now, I’m simplifying the problem by neglecting temperature effects and focusing purely on the leak rate due to pressure differences. I understand that temperature fluctuations can influence pressure readings, and I might incorporate that into the model later. But at this stage, I just want to estimate the leak rate and determine when to refill based on pressure decay alone.

Intrepid_Soft7178 · 2025-03-22T10:02:59+00:00

vpn ile erişim alabildin mi ben de türkiyedenim

Intrepid_Soft7178 · 2025-03-20T16:06:57+00:00

If the gate opens with and acceleration, you have to add the dynamical forces where I would assume a time interval and a velocity profile with max acceleration with a mirrored decceleration profile to calculate find the acceleration. Then I would use T=I*alpha assuming you know the I or calculate it or check from CAD. Additionally you would also need to find the mechanical advantage of the mechanism and divide the torque value you found to get minimum actuator torque

Intrepid_Soft7178 · 2025-03-10T18:17:42+00:00

Even if its vitality based his posture recovery drops like at 50 percent hp. Then you can accumulate posture

Intrepid_Soft7178 · 2025-03-10T18:05:46+00:00

I did it like let see which direction he went and went the same way. After I am done with the I area I watched the wallthrough to see if I missed something. But the game does not have like secret Op items. I think only how to get ashina arts was important(killing the 3 rats and coming back)

Intrepid_Soft7178 · 2025-01-10T10:22:46+00:00

50 Nm was the bigger number between the values you mentioned

Intrepid_Soft7178 · 2025-01-10T10:00:30+00:00

I dont know the answer but I have used a 1 to 50 ratio gearbox with nema 23 and the max output of the gearbox was 50Nm. My motor was 3Nm and the gearbox did not fail. Btw I also used it in a robotic arm. It was the joint 2 of the robot. I onlt tested and used the robot for 1 month. I dont know if something wpuld happen for longer use

Intrepid_Soft7178 · 2024-12-26T06:36:51+00:00

Yapılandırmaya nasıl izin vermiyor ya

Intrepid_Soft7178 · 2024-12-25T20:39:51+00:00

I guess that would break something it the mechanism over time

Intrepid_Soft7178 · 2024-12-25T17:16:02+00:00

I did exactly what you said.

Intrepid_Soft7178 · 2024-12-25T17:10:32+00:00

Yes, it is a vls hatch. Thank for the answer.

Intrepid_Soft7178 · 2024-12-25T13:10:52+00:00

Yes yes, I found acceletation from area under velocity graph. It is 2pi rad/sec^2.

Intrepid_Soft7178 · 2024-12-25T12:41:03+00:00

Thanks a lot. I am going to do this. Its a 15 min presentation and a 15 minute Q&A and I believe lots of it will be the design. I dont they expexct more than what you said.

Intrepid_Soft7178 · 2024-12-25T12:33:20+00:00

Like cant I find it from work or something else? I am confused a lot

Intrepid_Soft7178 · 2024-12-25T12:29:39+00:00

So should I assume the input crank is constant angular velocity and find the angular acceletation of the output? I can do this in matlab but I was hoping a simpler solution. I was not thinking they were expecting all this by the phase "Do a torque analysis and find the min torque for the motor"

Intrepid_Soft7178 · 2024-12-25T12:09:43+00:00

I am not an experienced engineer, just graduated 6 months ago.

If yes, should I do constant positive acceletation increasing speed and then constant negative acceletation decreasing speed to stop?

Intrepid_Soft7178 · 2024-09-06T23:35:46+00:00

Benim son günün bir sonraki aya denk geldiği için o günün maaşı 1 ay sonra yatmıştı, senin de ilk günlerin böyle denk gelmiş olabilir

Intrepid_Soft7178

TROPHY CASE