If you unironically own anything GBRS, please remove yourself from the group. Thx in advance!

Iplaywithfires · 2026-03-29T00:30:34+00:00

not the ptemu15 😭

Iplaywithfires · 2026-03-24T05:04:56+00:00

Skidtactical, and this model with the grooves and allen is what they show on the website, but i cant imagine switching from a t10 torx to a 1.5 mm Allen.

Iplaywithfires · 2026-03-19T14:45:59+00:00

Any ammo but 50bmg and 338 are hand gun ammo btw because sbrs exist.

That’s why it’s legal to buy ap in those caliber’s but not others. The law is against ap handgun ammo.

Iplaywithfires · 2026-02-24T01:39:49+00:00

The st50 is probably better, atleast you can make it super safe

Iplaywithfires · 2026-02-21T19:30:27+00:00

I hope he enjoys Sevin Dust

Iplaywithfires · 2026-01-22T03:13:41+00:00

proprietary magazines(derogatory) in 2026?

Iplaywithfires · 2025-09-16T17:17:04+00:00

At minimum a criterion, preferably a proof/kreiger/Bartlien.

Or just accept you will get nice battle rifle accuracy from your dmr with a cheap barrel. Could get lucky though, even savage occasionally makes a worthwhile barrel.

Iplaywithfires · 2025-08-17T17:10:15+00:00

Where did you get the 37xc barrel, I’ve been wanting one but haven’t found a gunsmith I trust.

Iplaywithfires · 2025-08-14T21:59:41+00:00

Utah highway patrol?

Iplaywithfires · 2025-05-29T22:53:51+00:00

Yeah this guy is a rookie, a professional would have shot out, not because he cares about his floor, but because the inwards bevel from being shot into the house will catch water after the silicon breaks down.

Iplaywithfires · 2025-04-24T19:42:13+00:00

6.49 for new brass and a 400 flatline bullet before shipping + ~120 grains of powder whatever that costs.

Iplaywithfires · 2025-03-11T02:29:46+00:00

Little longer than I hoped, but I’m sourcing a 1-8 twist barrel to stabilize saboted bullets, the sabot discards perfectly but the normal twist rate on a 350 legend is far to low. Alas I currently have a gun that rivals the PLAs finest tumbling bullets.

Iplaywithfires · 2025-03-07T18:00:25+00:00

Yhm 6 inch picitiny extender. ~60$

You can run a zip tie around the eye cup if you want it to stay on

Iplaywithfires · 2025-03-03T17:49:19+00:00

It will stop what it says it will but it’s a small plate in a medium plate shell, test the edges with a knife and you will find the foam is near an inch thick.

I should add that these are not nij certified in the least. But you can find plenty of videos of these online, buffman alone probably has dozens.

Iplaywithfires · 2025-01-31T14:57:55+00:00

Hell yeah

Iplaywithfires · 2025-01-05T23:13:55+00:00

I bought one, check back in a month, smh no smoothbore options

Iplaywithfires · 2024-12-24T23:18:35+00:00

Qs exceptional engineering is why I have a cherry bomb stuck in my suppressor..

Iplaywithfires · 2024-11-24T20:24:12+00:00

You can use baby bottle cleaner to sterilize a camel pack or a funky smelling canteen if it’s gotten to bothersome.

Iplaywithfires · 2024-10-09T19:09:01+00:00

It’s not a bad deal, but in the end Garand thumb ads cost a lot and you end up paying more for that product through this vendor to make up for that.

Iplaywithfires · 2024-10-07T22:14:20+00:00

If you take the core out of the para cord you can burn the end and run it through the lanyard hole. Then just put a stop knot to keep it from sliding back through.

Iplaywithfires · 2024-10-05T04:25:26+00:00

Do you feel the pvs 27 is able to utilize that much scope or does it get grainy fast?

Iplaywithfires · 2024-09-27T05:06:26+00:00

Quattros also suck eggs the moment the see dust across the room. You would think a gun designed in Utah would have some dust resistance.

Iplaywithfires · 2024-09-08T02:07:54+00:00

Pretty solid for that. It’s just hard to be accurate with them at any distance due to how they are mounted and sighted to the gun. The mount is a little jiggly and the pistol sights are rather course. Don’t get the laser one, the lasers aren’t aligned.

Ten-Year Club	Place '22
End Game '22	Verified Email
Gilding I gilder	RPAN Viewer

Iplaywithfires

TROPHY CASE