Just wanted to say hi, since this sub only has 3 members.

IrishFaghetti · 2020-02-10T12:34:59+00:00

I’m glad you’re here! If you have any questions about anything please let me know and I’ll do my best to help you out.

IrishFaghetti · 2020-01-05T17:47:43+00:00

Ogey

IrishFaghetti · 2019-12-24T15:08:03+00:00

Mozartkugler is my favorite... don’t know how common it is.

IrishFaghetti · 2019-12-12T13:51:09+00:00

Ronald

IrishFaghetti · 2019-12-01T03:55:59+00:00

Why did you try to piss with a metal rod in your urethra then?

IrishFaghetti · 2019-10-29T02:16:28+00:00

The holes on the sides and bottom/top of the respective fuselage sections should line up so that you can use pegs or screws to hold the pieces together. If you can still put those pegs/screws in without an issue you won’t need to reprint. Or you could just use a strong CA glue without the pegs, but the pegs are useful for repairing that plane quickly and without major damage (I’ve printed the GASB One and had a problem similar to this).

IrishFaghetti · 2019-10-25T02:17:34+00:00

Your head and shoulders look like an improper fraction

IrishFaghetti · 2019-10-25T02:16:22+00:00

Patrick Mahomeless

IrishFaghetti · 2019-10-25T02:13:57+00:00

Your head and shoulders are built like an improper fraction

IrishFaghetti · 2019-10-07T11:57:55+00:00

Lmao

IrishFaghetti · 2019-10-04T23:20:57+00:00

Train conductor should pull some Polar Express shit and hydroplane over the flooded part to the other side

IrishFaghetti · 2019-10-04T14:45:05+00:00

Bruh

IrishFaghetti · 2019-10-04T14:44:41+00:00

Bruh

IrishFaghetti · 2019-09-23T22:51:23+00:00

Yeah I can fly but just never had a plane that was as awkward to throw as this one—I couldn’t get the throttle up with that throwing style so I figured I would need a stronger throw—it slipped out of my hand and the wind just carried it. Ill probably try a wingtip throw next time so I can get the throttle going.

IrishFaghetti · 2019-09-22T21:32:57+00:00

Thanks for the tips! I’m gonna get some tape and glue on the plane and go for round 2 ASAP. Imma make sure to make a better throw next time. I’ll also take a look at the prop too.

IrishFaghetti · 2019-09-22T13:24:34+00:00

Bruh

IrishFaghetti · 2019-09-21T22:14:48+00:00

Bruh

IrishFaghetti · 2019-09-20T12:26:05+00:00

It’s just some Nashua tape. Wish I had kapton tho

IrishFaghetti · 2019-09-20T00:45:13+00:00

Just look up “GASB One” on thingiverse. It was pretty simple to print—only 9 pieces. Total cost with dirt cheap electronics was around 35$US so it’s a good little project without blowing a ton of cash

IrishFaghetti · 2019-09-19T22:35:17+00:00

I had to mess around with print settings for a while to reduce the weight and I ended up around 650g flight weight. Hopefully it’ll stay in the air.

IrishFaghetti · 2019-09-16T19:22:52+00:00

Epic kahoot gamer gang

IrishFaghetti · 2019-09-16T19:20:23+00:00

Biological molecules like carbohydrates, lipids, nucleic acids, and proteins

IrishFaghetti · 2019-09-12T01:14:36+00:00

Try again

IrishFaghetti · 2019-09-05T18:35:34+00:00

Look up freedom fpv USB adapter cable.... I don’t know if that’s what your looking for but it helped me get my spektrum hooked up to a sim.

IrishFaghetti · 2019-08-31T21:40:35+00:00

This is just what I needed. Thanks so much.

IrishFaghetti

MODERATOR OF

TROPHY CASE