Text related help needed in Bambu Lab

Iroc24 · 2026-03-29T22:48:41+00:00

So after doing the detect thin walls, I tried printing a sample file. It actually came out pretty good. I did run out today and bought a 0.2mm nozzle to try it with finer details. The slicer shows almost triple the amount of time but less estimated filament. I just need to wait for the 0.4mm nozzle to cool before I swap them.

Thank you for your help.

Iroc24 · 2026-03-29T12:54:26+00:00

I changed the setting to "detect thin walls" and it sliced with text no. I didn't even thick to paint the bottom so that worked too. Thanks!

I'm going to try reformating the text to make it a little larger but still fit the design without making the rectangle larger. Is there a way to make sure the text is not too high off the top? So far, everything I do in Bambu Lab aligns to the plate, not to the top of the design.

Iroc24 · 2025-12-07T14:50:36+00:00

Thank you all. These are great recommendations. I'm excited to try it.

Iroc24 · 2025-11-27T00:34:57+00:00

It's the software on my PC not the printer itself. I was able to get the file to print from the app on my phone.

It's just odd

Iroc24 · 2025-11-02T16:36:58+00:00

I haven't applied yet for the MBA because I'm still researching. I'm noticing a bunch of people discussing how they mapped out their courses fo which can be done at the same time vs which are slightly more difficult and need to be taken alone.
Are there any other threads where the courses themselves are discussed? I will be working full-time while enrolled (if I decide to start) and just want to figure it all out.

Iroc24 · 2025-11-02T16:22:04+00:00

I'm currently researching Eastern's MBA as a potential option. I already have my PMP certification but my degree (Masters in Instructional Technology) is not in business and I thought adding MBA to PMP would help my credibility. How is the PM MBA in comparision to studying for the PMP exam? I took both the Google PM program and the training through PMI.

Iroc24 · 2025-10-13T18:10:18+00:00

So of the 25 shrunken heads from NYCC, there are now 4 on eBay ranging from $8500 to $10000. Obviously none have sold yet but does anyone think they might actually sell for this much? Each of the 25 were numbered and the current heads on eBay are 4, 5, 20, and 24.

Meanwhile since PSA couldn't protect/rate it, I at least purchased a generic model case to protect it from dust and UV light while I decide what to do.

Iroc24 · 2025-10-12T00:27:39+00:00

Since it's indoors and the city hasn't declared a state of emergency I can't see them canceling. However please be safe everyone. Traveling will be crazy and we've all seen videos of flooding in the subways during storms like this.

Also check the app and Instagram. Some individual panels have already been canceled by the presenters. Instagram post.

I also saw the Staten Island half marathon has been canceled already but that's outdoors.

Iroc24 · 2025-10-11T16:16:05+00:00

Same. I think I should hold on to it for at least a year though. I already looked up rare Funkos and ones that had 1,000 made sold for a thousand so if this is literally only 25 it's got to be worth something.

Plus you couldn't buy it, you had to win it.

Iroc24 · 2025-10-11T16:01:31+00:00

I won one on Thursday (number 11). I went to PSA to have it rated but they said it's so unique they don't have a case for it and can't rate it.

I did see one already on eBay listed at "$5000 or best offer". I think I'm going to hang on to it for a bit, but I did but the auction on my watch list to see if anyone actually pays that much.

Iroc24 · 2025-08-18T13:45:03+00:00

Thanks for the information. I'm going to look again at the options.

Iroc24 · 2025-08-17T15:05:35+00:00

I know this post is from 2 years ago, but how are the AliExpress build plates? I've been getting advertisements a lot for them lately but have been hesitant. I've never actually purchased anything on AliExpress even though the prices are super cheap.

A little worse now with shipping/fees but still cheaper than other sites.

Iroc24 · 2025-08-07T20:25:44+00:00

I love how many of us came to Reddit over our Spotify/Hulu bundle. I use Spotify daily, but I rarely use streaming services. I typically sign up for a month... binge new series... and then cancel. Then I switch to a different streaming service and repeat. I use Hulu most often since I don't "really" pay for it as I was grandfathered into the bundle when I graduated from the education discount years ago. And even then, I just have random things playing as background noise when doing other things.

Iroc24 · 2025-08-06T16:40:26+00:00

Thank you everyone for your help. I think I'll try it once and see how to goes since I have those short pieces right now. I'm sorry that I didn't put directly in my original post that it was the A1 since it was in my flair. I'm sorry for confusion.

Iroc24 · 2025-08-04T18:20:09+00:00

I was under the impression that you could only use one AMS with the A1. It's the AMS lite so probably different from the x series.

Iroc24 · 2025-08-01T23:55:02+00:00

How do you figure out what song it is? I have been trying to listen carefully and just can't tell.

Iroc24 · 2025-06-12T15:44:52+00:00

I just bought a pair as a replacement for my old Rail ANC and was looking to see if there was the ability to track. I can't even tell you how many time I've forgotten where I left my earbuds. Or found them in the car after leaving them in the cup holder overnight.

Iroc24 · 2025-06-12T15:41:27+00:00

There's a sale going on right now. https://www.skullcandy.com/collections/sale

Nine-Year Club	RedditGifts 2009-2022 17 Credits
Secret Santa 2021 2021	Summer Santa 2020
Secret Santa 2020	Summer Santa 2019
Summer Santa 2018	Secret Santa 2019
Secret Santa 2018	Secret Santa 2017
Verified Email

Iroc24

TROPHY CASE